User manual

 - English
Settings
Radio Setup

To listen to the radio, you must connect the
supplied FM antenna.


 Press the  button to select .
 Tune to the desired station.

Preset Tuning 1 : Press the  button
to select , and then press the
78
buttons to select a preset station.
-
Before you can tune to preset stations,
you must add preset stations to the
product's memory.

Manual Tuning : Press the  button
to select , and then press the
78
buttons to tune to a lower or higher
frequency.

Automatic Tuning : Press the 
button to select , and then press
and hold the
78
buttons to automatically
search the band.

Press the  button.

Each time you press the button, the sound
switches between  and .

In a poor reception area, select  for a
clear, interference-free broadcast.

Example : Presetting FM 89.10 into memory.
 Press the  button to select .
 Press the
78
buttons to select <89.10>.
 Press the  button.

NUMBER flashes on the display.
 Press the  button again.

Press the  button before
NUMBER disappears from the display on its
own.

After you press the  button,
NUMBER disappears from the display and
the station is stored in memory.
 To preset another station, repeat steps 2 to 4.

To tune to a preset station, press the
 button to select , and then
press the
78
buttons to select the preset
station.

You can record your favorite radio broadcast on a
inserted USB storage device.
 Insert a USB device into the USB jack on the
front of the product.
 Press the  button to select , and
then then press the
78
buttons to select
the station you want to record.
 Press the  (Red) button to start recording
the radio broadcast. Recording begins.

The recorded time is displayed on the left
and the recording time still available, based
on the amount of free space in the USB
storage device, is displayed on the right.
 Press the
e
() button to finish your
recording. The recording is stopped and
saved as an .mp3 file at the same time. To
play the recorded file, refer to "Playing Files
on a Storage Device".
✎
The recorded file is saved in the  folder
which is created automatically.
✎
Only the
H
I
G
H
-
E
N
D
V
A
C
U
U
M
T
U
B
E
S
O
U
N
D
5V 0.5A
(),
H
I
G
H
-
E
N
D
V
A
C
U
U
M
T
U
B
E
S
O
U
N
D
5V 0.5A
(),
e
()
, (), and / , buttons are
operable while FM radio is being recorded.
✎
If you don't press any buttons while recording,
the screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
() button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of
the file which has already been recorded may
not play back.
✎
Recording will not start if the remaining free
space in the USB storage device is less than
2MB.
✎
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message
is displayed and the recording stops.