User manual
- English
The Network connection fail screen appears.
Use
:;
buttons to select , and
then press the button.
Select the field, and then set it to
.
Select a network parameter to enter (
, for example), and then press
button
. Use the
78
buttons on the
remote control to enter the numbers for
the parameter.
Or use the Num keypad to
enter a parameter number.
Press and hold the
button until the Num pad appears on the
screen. When the Num pad appears, select a
number using the
78:;
button and then
press the
button.
Use the
:;
buttons on
the remote control to move from entry field
to entry field within a parameter. When done
with one value, press the button.
Press the
,
or
.
button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 8.
Repeat Steps 8 and 9 until you have filled in
all parameters.
✎
You can get the Network parameter values
from your Internet provider.
When finished, select , and then press the
button. The Security screen appears.
On the Security screen, enter your network's
security code or pass phrase. Enter letters by
selecting a letter with the
78:;
buttons,
and then pressing the button.
When finished, select at the right of
the screen, and then press the button.
The product verifies the network connection
and then connects to the network.
After the home cinema verifies the network,
select , and then press the button.
✎
You can also begin the Manual Network setup
by going to
.
Ğ
One of the easiest ways to set up the wireless
network connection is using the
function. If your wireless router has a
button, follow these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 23:
In the screen, change
to . The product
searches for and then displays a list of the
available networks.
Scroll the list down, select , and
then press the button.
Press the button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network after the network connection is
verified.
When it is done, highlight , and then
press the button.
✎
For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The function allows you to connect
devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎
Some devices may not support
the DLNA function if connected via
. If this is the case, change the network
connection method you used to connect the
device to the home cinema.
✎
transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the function on
any device in which it is currently on.
Turn on the device and activate
its function.
In the Home screen, select , and then
press the button.
Select , and then press the
button.
Select , and then press the
button.
The devices that you can connect
the home cinema to appear.