User manual
- English
Appendix
Are you using a disc that does not contain menus?
The home cinema can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3
Letter Box mode, or 4:3 Pan-Scan mode, but plays 4:3 Blu-ray/DVD discs
in 4:3 mode only. Refer to the Blu-ray Disc jacket, and then select the
appropriate aspect ratio.
Press and hold the remote control's
e
() button for 5 seconds in
STANDBY mode. This will reset the unit.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
With no disc in the product, press and hold the product's
@
button for
longer than 5 seconds. appears on the display and all settings will return
to their default values.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
If you press the
^
button while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and
the TV audio is muted.
The feature is unavailable or the action cannot be completed at this time
because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
Press and hold the
@
button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
Check the connection between the TV and the HDMI jack of the product.
Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input
resolution.
If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).