manual de utilizador

21
ENG
22
CONNECTIONS
Connecting External Components
Press AUX on the remote control to select ‘DIGITAL IN.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ HDMI IN ➝ USB ➝ FM.
2
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital
component.
1
Example: Digital signal components such as a Set-top Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not supplied)
HDMI Function(Con’t)
Resolution Selection
•
This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
•
Resolutions available for the HDMI output are 576p (480p), 720p and
1080i.
•
SD(Standard Definition) resolution is 576p (480p) and HD(High Definition)
resolution is 720p/1080i.
Example: If the TV supports resolution up to 576p (480p):
Press the SD/HD button.
•
A 576p (480p) video signal is output through the HDMI output.
•
If the TV does not support the configured resolution, you will not be able
to see the picture properly.
• You do not have to make separate adjustments, since the Home
Theater and TV will be automatically adjust themselves to the
optimal resolution and aspect ratio if connected to HDMI.
(If the TV is an HDTV and has an HDMI Input jack, output is automati-
cally converted to 1080i resolution (if supported by the TV).)
• For component video output, only 576i (480i) is supported.
• See your TV owner's manual for more information on how to select
the TV's Video Input source.
Note
Q80/85(1~46)_NOGB 2006.4.29 3:02 PM Page 24