manual de utilizador

ENG
28
OPERATION
To stop playback, press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE ( ) button again.
The DVD/CD function is automatically selected when Disc Skip is pushed.
Selecting a Disc in the Disc changer
To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
•
If the disc selected is not loaded, the next disc is played automatically.
27
Disc Playback
2
Load a disc.
•
Place a disc gently into the tray with the disc’s label
facing up.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press DISC SKIP button.
•
Rotate the carousel tray so you can load the third, fourth,
and fifth discs.
4
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD VCD CD
•
Playback starts automatically.
•
Depending on the content of the disc, the initial screen may appear different.
•
Any piracy could not be runnable in the player. Otherwise, it violates the CSS recommendations.
Note
What is Content Scrambling System (CSS)?
The Content Scrambling System is a copy protection device that prevents
the content of a DVD from being copied into the HDD of the PC as it is,
unlike other media, executable directly from the PC. And it is also a data
decryption system that decrypts the key encryption with the encrypted title
key (of the DVD title) and the player key (of the DVD player).
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
•
By default, the video format is set to "PAL".
•
"NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video
format of your TV.
Q80/85(1~46)_NOGB 2006.4.29 3:02 PM Page 30