manual de utilizador

ENG
1413
CONNECTIONS
Speaker Installation
How to install the speaker and the stand (Tallboy type)
How to install the speaker and the stand (Half tallboy type)
Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw
1
Turn the STAND (B)
upside-down and con-
nect it to the STAND
BASE (C).
2
Turning the screw (D) clock-
wise, connect it to two holes
marked with the arrow using
a screwdriver as shown in
the ullustration.
3
Turning the supplied
screw (E) clockwise,
connect it to a hole on
the rear of the
Speaker.
4
Connect the assem-
bled stand to the
SPEAKER (A).
5
Turning the screw (E) clock-
wise, connect to a hole on
the rear of the speaker using
a screwdriver as shown in
the illustration.
6
This is the success-
fully assembled
speaker.
• Make sure that the TALLBOY type speaker
should be installed on the flat and stable area.
Otherwise it may fall down due to external shock.
Note
Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw
1
Connect the SPEAK-
ER (A) with the
STAND BASE (C).
2
Turning the screw (D) clock-
wise, connect it to two holes
marked with the arrow using
a screwdriver as shown in
the illustration.
3
Turning the screw (E) clock-
wise, connect to a hole on
the rear of the speaker
using a screwdriver as
shown in the illustration.
4
This is the successfully
assembled SPEAKER (A).
Q80/85(1~46)_NOGB 2006.4.29 3:02 PM Page 16