HT-WZ410 HT-TWZ412 Digital Home Theater System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register HT-WZ410(TWZ412)_XAA_0613.
features Playback of many disc types This Home Theater System allows you to play back various discs, including DVD-AUDIO, DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD±R/RW. DVD-Audio compatible Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.
ENG safety information SWA-4000 Wireless Receiver Module TX Card (AH81-04177J) Speaker Cable (2EA) (AH81-02137A) SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
safety information IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. Keep these Instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
ENG PRECAUTIONS Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty.
contents 2 What’s included 3 4 5 Safety Warnings Important Safety Instructions Precautions GETTING STARTED 8 9 9 9 10 Before Reading the User’s Manual Playable Discs Do not use the following types of disc! Copy Protection Disc Type and Characteristics DESCRIPTION 11 12 13 Front Panel Display Rear Panel REMOTE CONTROL 14 16 Tour of the Remote Control Setting the Remote Control CONNECTIONS 18 23 32 Connecting the Speakers Conecting the Rear Speakers to the Wireles Receiving Amplifier Connectin
ENG 59 59 60 60 61 61 62 Setting the Language Setting TV Screen Type Setting Parental Controls (Rating Level) Setting the Password Setting The Wallpaper To Select one of the 3 Wallpaper Settings You've Made DVD Playback Mode Setting the Speaker Mode Setting the Delay Time Setting the Test Tone Setting the Audio Setting the DRC (Dynamic Range Compression) Setting the AV SYNC Setting the HDMI Audio Sound field (DSP)/EQ Function Dolby Pro Logic II Mode Dolby Pro Logic II Effect P.
getting started BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon Term Definition d DVD This involves a function available with DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. CD This involves a function available with a data CD (CD-R or CD-RW). MP3 This involves a function available with CD-R/-RW discs. JPEG This involves a function available with CD-R/-RW discs.
1 ~ 6 ENG DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player.
getting started DISC TYPE AND CHARACTERISTICS This product does not support Secure (DRM) Media files. ❖ CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minutes as they may not be played back. • Some CD-RW (Rewritable) media, may not be playable. • Only CD-Rs that are properly "closed" can be fully played.
ENG description FRONT PANEL ● DESCRIPTION 10 DISC CHANGE FUNCTION VOLUME DISC CHANGE FUNCTION PHONES VOLUME AUX IN 1 ASC IN 11 12 13 14 DISC TRAY TUNING UP & SKIP ( ) BUTTON 11 POWER( ) BUTTON FUNCTION BUTTON OPEN/CLOSE BUTTON 12 PHONES JACK TUNING DOWN & SKIP ( ) BUTTON VOLUME CONTROL 13 AUX IN 1/ASC (Auto Sound Calibration) IN JACK STOP (¦) BUTTON DIRECT PLAY 1~5 BUTTONS 14 USB PORT PLAY/PAUSE ( ) BUTTON 10 DISC CHANGE BUTTON 11 HT-WZ410(TWZ412)_XAA_0613.
description DISPLAY 10 11 13 14 15 16 12 FUNCTION DISPLAY USB INDICATOR 13 RADIO FREQUENCY INDICATOR REPEAT INDICATOR DTS DISC INDICATOR 14 DOLBY DIGITAL INDICATOR HDMI INDICATOR REPEAT INDICATOR 15 PRO LOGIC INDICATOR 16 LPCM INDICATOR DISC INDICATOR 10 DSP INDICATOR DVD INDICATOR 11 ASC (Auto Sound Calibration) INDICATOR CD INDICATOR 12 SYSTEM STATUS DISPLAY 12 HT-WZ410(TWZ412)_XAA_0613.
ENG REAR PANEL 1 2 3 4 5 6 7 8 ● DESCRIPTION 9 10 10 TX CARD CONNECTION (WIRELESS) The TX card enables communication between the main unit and the wireless receiver amplifi er. iPod JACK Connect the iPod dock connector here. AUX IN 2 JACKS Connect to the 2CH analog output of an external device (such as a VCR) VIDEO OUTPUT JACK Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack. COMPONENT VIDEO OUTPUT JACKS Connect a TV with Component video inputs to these jacks.
remote control TOUR OF THE REMOTE CONTROL 1 2 DVD RECEIVER DVD PORT 3 19 20 21 22 4 5 6 7 REMAIN STEP PAUSE 23 24 25 8 26 9 27 28 29 30 10 AUDIO SUB TITLE 31 11 32 12 13 14 15 16 17 18 33 34 P.BASS 35 36 37 14 HT-WZ410(TWZ412)_XAA_0613.
DVD RECEIVER button 20 PORT button 2 TV button 21 DISC SKIP, TV/VIDEO button 3 POWER button 22 4 Number (0~9) buttons 23 CANCEL button 5 REMAIN button 24 PAUSE button 6 STEP button 7 Tuning Preset/CD Skip buttons 8 VOLUME button 26 TUNING/CH button 9 MENU button 27 MUTE button 10 AUDIO button 28 RETURN button 29 Cursor/ENTER button OPEN/CLOSE button PLAY button STOP button SEARCH buttons 12 TUNER MEMORY, SD(Standard Definition)/HD(High Definition) button 30 SUBTITLE
remote control SETTING THE REMOTE CONTROL You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the TV button to set the remote to TV mode. 2. Press the POWER button to turn on the TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
No. No. Brand 1 Admiral (M.Wards) 56, 57, 58 44 MTC 18 2 A Mark 01, 15 45 NEC 18, 19, 20, 40, 59, 60 3 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 46 Nikei 03 12, 13, 14 47 Onking 03 Code Brand ENG TV Brand Code List Code AOC 01, 18, 40, 48 48 Onwa 03 5 Bell & Howell (M.
connections This section involves various methods of connecting the Digital Home Theater to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. CONNECTING THE SPEAKERS Position of the DVD Player Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TVs 2~2.
ENG Speaker Components HT-WZ410 (L) (R) FRONT L (AH81-03848E) R (AH81-03848M) REAR L (AH81-03848G) R (AH81-03848N) CENTER (AH81-03848F) SUBWOOFER (AH81-03848D) CENTER (AH81-03469A) CENTER (AH81-03853A) FRONT/REAR (AH81-03465A) FRONT/REAR (AH81-03852A) CRADLE STAND/ WALL MOUNT HOLE COVER ● CONNECTIONS (L) (R) Installing the Cradle Stand 1. Insert the stand so that it fits into the hole as described in the figure. 1 1 2. Turn the stand clockwise to lock it.
connections Installing the Wall Mount 1. Insert the wall mount so that it fi ts into the rear hole of the speaker as in the figure. 1 1 2. Turn the wall mount counter clockwise to fix it. (This is the reverse direction to the cradle stand.) 2 2 3. Put the hole cover on the hole of the speaker. 3 3 4. Use a coin turn the hole cover clock wise to fix it. (Turning it counter-clock wise will loosen from the hole.) 4 4 5.
HT-TWZ412 (L) (R) ENG Speaker Components (L) (R) CENTER CENTER REAR (AH81-03853A) (AH81-04028G) L (AH81-04028D) R (AH81-04028C) CENTER (AH81-04171F) SCREW (Small): 6EA (AH81-03944A) ● CONNECTIONS SCREW (Large): 4EA (AH81-03943A) REAR REAR (AH81-03852A) (AH81-03465A) FRONT STAND L (AH81-04028B) R (AH81-04028A) (AH81-04028E) HOLE COVER CRADLE STAND/ WALL MOUNT SUBWOOFER (AH81-03856F) STAND BASE (AH81-04028F) How to Install the Speaker on the Stand (HT-TWZ412 only) 1.
connections Connecting the Front, Rear, Center and Subwoofer Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the Home Theater. • Make sure the colors of the speaker terminals match the colors of the connecting plugs.
ENG CONECTING THE REAR SPEAKERS TO THE WIRELES RECEIVING AMPLIFIER Wireless Receiving Module (SWA-4000) HT-WZ410 Center Speaker ● CONNECTIONS Front Speaker (R) Rear Speaker (L) Front Speaker (L) Rear Speaker (R) Subwoofer WIRELESS RECEIVER MODULE HT-TWZ412 Center Speaker Front Speaker (L) Front Speaker (R) Rear Speaker (L) Rear Speaker (R) Subwoofer WIRELESS RECEIVER MODULE 23 HT-WZ410(TWZ412)_XAA_0613.
connections 1. Connect the front, center and Subwoofer speakers to the DVD Player, referring to page 22. 2. With the DVD Player turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the main unit. • Hold the TX card so that the slanted side faces to the left and insert the card into the port. • The TX card enables communication between the main unit and the wireless receiver. 3. Connect the left and right rear speakers to the wireless receiving module.
ENG CONNECTING THE VIDEO OUT TO YOUR TV Choose one of the three methods for connecting to a TV. METHOD2 ● CONNECTIONS METHOD3 (supplied) METHOD1 METHOD 1 : HDMI Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.
connections HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. For possible HDMI resolutions, see page 27. • HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
ENG HDMI FUNCTION Resolution Selection This function allows the user to select the screen resolution for HDMI output. M If the TV does not support the configured resolution, you will not be able to see the picture properly. When an HDMI cable is connected, composite and component video signals are not output. See your TV owner's manual for more information on how to select the TV's Video Input source.
connections CONNECTING AN iPod You can listen to the audio from an iPod through the main unit. For iPod operation with this Home Theater, see pages 29 and 48. ipod AUX IN 2 ipod 1. Connect the iPod dock connector to the iPod jack on the DVD home theater. 2. Press the PORT button on the remote control to select iPod input. • You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD ➞ D-IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ OSD iPOD ➞ FM.
ENG iPod models compatible with the dock 20GB 40GB 20GB, 30GB (color display) 40GB, 60GB (color display) nano (1GB, 2GB, 4GB) nano (aluminum) (2GB, 4GB, 8GB) 30GB (video) 60GB, 80GB (video) The following 4 models must be used with the applicable dock insert as well as the dock before they can be connected to the system.
connections CONNECTING AUDIO FROM EXTERNAL COMPONENTS AUX1 : Connecting an External Component/MP3 player Components such as an MP3 Player DISC CHANGE FUNCTION PHONES VOLUME AUX IN 1 ASC IN Audio Cable (not supplied) Audio OUT 1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player. 2. Press the AUX button on the remote control to select AUX1 input. • You can also use the FUNCTION button on the main unit.
ENG AUX2 : Rear Panel OPTICAL : Rear Panel ipod AUX IN 2 External Analog Component ● CONNECTIONS Optical Cable (not supplied) Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. External Digital Component AUX2 : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component. • Be sure to match connector colors. 2.
connections CONNECTING THE FM ANTENNA 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. FM Antenna (supplied) M This unit does not receive AM broadcasts. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. • Make sure the unit is well-ventilated.
ENG before using your home theater The DVD Home Theater's remote can be used to control Samsung TVs. 1. Plug the main unit's power cord into the AC power supply. ● BEFORE USING YOUR HOME THEATER DISC CHANGE FUNCTION VOLUME 2. Press the DVD RECEIVER button to operate the DVD Home Theater. 3. Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. 4. Press the TV button to set the remote to TV mode. 5.
playback DISC PLAYBACK dB 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Load a disc. • Place a disc gently into the tray with the disc’s label facing up. DISC CHANGE FUNCTION VOLUME 3. Press the DISC SKIP button. • Rotate the carousel tray so you can load the third, fourth, and fifth discs. 4. Close the compartment by pressing the OPEN/CLOSE ( button again. • Playback starts automatically. ) To stop playback, press the STOP ( ) button during playback.
ENG MP3/WMA-CD PLAYBACK Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. A ● PLAYBACK 1. Place the MP3/WMA disc on the disc tray. • The MP3/WMA menu screen will appear and playback will start. • The appearance of the menu depends on the MP3/WMA disc. • WMA-DRM files cannot be played. 2. In Stop mode, use the Cursor S,T,W,X button to select the album, and then press the ENTER button. • Use the Cursor S,T button to select the track. 3.
playback JPEG FILE PLAYBACK Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater. G Slide Mode Place the JPEG disc on the disc tray. • Playback starts automatically. Each image is displayed for 5 seconds and then the next image is displayed. Press the #,$ button to skip to the next slide. • Each time the button is pressed, the slide moves backward or forward.
ENG DIVX PLAYBACK The functions on this page apply to DivX disc playback. D Skip Forward/Back Fast Playback ● PLAYBACK During playback, press the #,$ button. • Goes to the next file whenever you press the $ button, if there are over 2 files in the disc. • Goes to the previous file whenever you press the # button, if there are over 2 files in the disc. D During playback, press the , button. To play back the disc at a faster speed, press the or button during playback.
playback DIVX PLAYBACK D If the Disc has more than One Subtitle File If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows: 1. In Stop mode, press the Cursor S,T button, select the desired subtitle ( ) from the TV screen, and then press the ENTER button. 2. When you select the desired DivX file from the TV screen, the movie will be played normally.
Displaying Disc Information dBAGD ENG USING THE PLAYBACK FUNCTION You can view disc playback information on the TV screen. Press the INFO button. ● PLAYBACK M Depending on the disc, the disc information display may appear different. Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC. appears on the TV screen! If this symbol appears on the TV screen when pressing a button, that operation is not possible with the disc currently being played.
playback USING THE PLAYBACK FUNCTION Fast Playback dBAD Press the , button. • Each time the button is pressed during playback, the playback speed changes as follows: 2X ➞ 4X ➞ 8X ➞ 32X ➞ X PLAY 2X ➞ 4X ➞ 8X ➞ 32X ➞ X PLAY M During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. Slow Playback dD Press the SLOW button.
dBAGD Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). ENG Repeat Playback Press the REPEAT button.
playback USING THE PLAYBACK FUNCTION d A-B Repeat Playback You can repeatedly play back a designated section of a DVD. 1. Press the INFO button twice. 2. Press the Cursor X button to move to REPEAT PLAYBACK ( ) display. 3. Press the Cursor S,T button to select A- and then press the ENTER button. • When the ENTER button is pressed, the selected position will be stored in memory. 4. Press the ENTER button at the end of the desired segment. • The specified segment will be played repeatedly.
This function allows you to view the same scene in different angles. ENG d Angle Function 1. Press the INFO button. 2. Press the Cursor X button to move to ANGLE ( display. ) 1/3 ➞ M 2/3 ➞ 3/3 ➞ ● PLAYBACK 3. Press the Cursor S,T button or numeric buttons to select the desired angle. • Each time the button is pressed, the angle changes as follows: 1/3 The Angle function works only with discs on which multiple angles have been recorded.
playback USING THE PLAYBACK FUNCTION Bonus Group Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and the key number. DVD-AUDIO BONUS GROUP KEY NUMBER : When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically. M If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number.
1. Press the INFO button twice. ENG d Audio Language Selection Function 2. Press the Cursor S,T button or numeric buttons to select the desired audio language. • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. d Subtitle Language Selection Function 1. Press the INFO button twice. 2. Press the Cursor X button to move to SUBTITLE ( display. ● PLAYBACK EN 1/3 ➞ SP 2/3 ➞ FR 3/3 ➞ EN 1/3 ) 3.
playback USING THE PLAYBACK FUNCTION dBAG Moving Directly to a Scene/Song AG Press the numeric buttons. • The selected file will be played. • When playing an MP3 or JPEG disc, you cannot use the Cursor S,T button to move to a folder. To move a folder, press the STOP (¦) and then press the Cursor S,T button. M You can press the #,$ button on the remote control to move directly to the desired title, chapter, or track. Depending on the disc, you may not be able to move to the selected title or time.
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. ENG d Using the Title Menu 1. In Stop mode, press the MENU button. 2. Press the Cursor S,T button to move to Title Menu. 3. Press the ENTER button. • The title menu appears. ● PLAYBACK d Press the EXIT button to exit the setup screen. MOVE M ENTER EXIT The Title menu display may be different depending on the disc. 47 HT-WZ410(TWZ412)_XAA_0613.
playback USING THE iPod You can enjoy playback of your iPod using the supplied remote control. 1. Place the iPod in the Dock. • Your iPod is automatically turned on. 2. Connect the dock connector for iPod to the iPod jack on the DVD home theater. 3. Press the PORT button on the remote control to select iPod mode. • Each time the button is pressed, your selection will toggle between iPod mode and USB mode. 4. Use S,TW,X and ENTER button on the remote control to display the list of menu. 5.
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel Home Theater sound by connecting the storage device to the USB port of the Home Theater. ENG PLAYING MEDIA FILES USING THE USB HOST FEATURE 1. Connect the USB device to the USB port on the front of the unit. PHONES AUX IN 1 ASC IN ● PLAYBACK 2.
playback Fast playback During playback, press the , button. • Each time you press either button, the playback speed will change as follows: 2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal. Compatible Devices 1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in Windows (2000 or later) without additional driver installation.) 2. MP3 Player: HDD and flash type MP3 players. 3. Digital camera: Cameras that support USB Mass Storage v1.0.
ENG system setup For your convenience, you can set this DVD Home Theater's features for the best use in your home environment. SETTING THE LANGUAGE OSD(On-Screen Display) language is set to English by default. ● SYSTEM SETUP 1. In Stop mode, press the MENU button. 2. Press the Cursor ▼ button to move to Setup and then press the ENTER button. 3. Select Language and then press the ENTER button. 4. Press the Cursor ▲,▼ button to select OSD Language and then press the ENTER button.
system setup SETTING TV SCREEN TYPE Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 1. In Stop mode, press the MENU button. 2. Press the Cursor ▼ button to move to Setup and then press the ENTER button. 3. Press the Cursor ▼ button to move to TV DISPLAY and then press the ENTER button. 4. Press the Cursor ▲,▼ button to select the desired item and then press the ENTER button. • Once the setup is complete, you will be taken to the previous screen.
ENG SETTING PARENTAL CONTROLS (RATING LEVEL) Use this to restrict playback of adult or violent DVDs you do not want children to view. 1. In Stop mode, press the MENU button. 2. Press the Cursor ▼ button to move to Setup and then press the ENTER button. 3. Press the Cursor ▼ button to move to PARENTAL and then press the ENTER button. 5. Enter the password and then press the ENTER button. • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
system setup SETTING THE WALLPAPER dG While watching a DVD or JPEG CD, you can set the image you like as background wallpaper. 1. During playback, press the PAUSE button when an image you like appears. 2. Press the LOGO button. • COPY LOGO DATA will be displayed on the TV screen. 3. The power will turn off and then back on. • The selected wallpaper will be displayed. • You can select up to 3 wallpaper settings. COPY LOGO DATA M This function will not work when the HDMI output is 720p, 1080i or 1080p.
ENG DVD PLAYBACK MODE Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. 1. Press the MENU button while the disc tray is open. 2. Press the Cursor ▼ button to move to Setup and then press the ENTER button. MOVE ENTER RETURN EXIT MOVE ENTER RETURN EXIT ● SYSTEM SETUP 3. Press the Cursor ▼ button to move to DVD TYPE and then press the ENTER button. 4.
system setup SETTING THE DELAY TIME If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1. 2. 3. 4. 5. In Stop mode, press the MENU button. Press the Cursor ▼ button to move to Audio and then press the ENTER button. Press the Cursor ▼ button to move to DELAY TIME and then press the ENTER button. Press the Cursor S,T,W,X button to move to the desired speaker and then press the ENTER button.
ENG SETTING THE TEST TONE Use the Test Tone feature to check the speaker connections. 1. In Stop mode, press the MENU button. 2. Press the Cursor ▼ button to move to Audio and then press the ENTER button. MOVE ENTER RETURN EXIT ● SYSTEM SETUP 3. Press the Cursor ▼ button to move to TEST TONE and then press the ENTER button. • The test tone will be sent to L ➞ C ➞ R ➞ SR ➞ SL ➞ SW in order. If the ENTER button is pressed again at this time, the test tone will stop.
system setup SETTING THE AUDIO Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button. Press the SOUND EDIT button and then press the Cursor W,X button. Adjusting Front/Rear Speaker Balance You can select between 00, -06, and OFF. The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level The volume level can be adjusted in steps from +6dB to –6dB. The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. ENG SETTING THE AV SYNC 1. In Stop mode, press the MENU button. 2. Press the Cursor ▼ button to move to Audio and then press the ENTER button. 4. Press the Cursor S,T button to select the AV-SYNC Delay Time and then press the ENTER button. • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
system setup SOUND FIELD (DSP)/EQ FUNCTION DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing Press the DSP/EQ button. • DSP appears on the display panel.
ENG DOLBY PRO LOGIC II EFFECT This function works only in Dolby Pro Logic MUSIC mode. 1. Press the PL II MODE button to select MUSIC mode. 2. Press the PL II EFFECT button. ● SYSTEM SETUP 3. Press the W,X buttons to select the desired effect setting. • PANORAMA : You can select either 0 or 1. • C- WIDTH : You can select between 0 and 7. • DIMENS : You can select between 0 and 6. P.BASS P.BASS function boosts the bass for a more powerful sound. 1. Press the P.BASS button to select P.BASS mode. 2.
system setup ASC (Auto Sound Calibration) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment.
ENG ASC (Auto Sound Calibration) SETUP 1. Plug the ASC microphone into the ASC input jack. 2. Place the ASC microphone at the listening position. 3. Press ASC button. • To create the optimal 5.1 channel sound field, the selections are in the following sequence: L ➞ C ➞ R ➞ SR ➞ SL ➞ SW ● SYSTEM SETUP 4. When the message "REMOVE MIC" appears in the display, unplug the ASC microphone. M Setting the ASC function takes about 3 minutes. To cancel the ASC (Auto Sound Calibration) setup, press ASC button.
radio LISTENING TO RADIO Remote Control 1. Press the TUNER button to select the FM band. 2. Tune in to the desired station. • Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations. • Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally. Main Unit 1. Press the FUNCTION button to select the FM band. 2.
ENG convenient function SLEEP TIMER FUNCTION You can set the time that the Home Theater will shut itself off. Press the SLEEP button. ● CONVENIENT FUNCTION • SLEEP will be displayed. Each time the button is pressed, the preset time changes as follows : 10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF. To confirm the sleep timer setting, press the SLEEP button. • The remaining time before the Home Theater will shut itself off is displayed.
troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. SYMPTOM Check/Remedy Disc tray does not open. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. ‘Please connect your ipod’ appears on the screen.
ENG SYMPTOM Check/Remedy • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed.
language code list Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 51).
ENG USB host feature supported products DIGITAL CAMERA Company Finepix-A340 Finepix-F810 Finepix-F610 Finepix-f450 Finepix S7000 Finepix A310 KD-310Z Finecam SL300R Finecam SL400R Finecam S5R Finecam Xt Dimage-Z1 Dimage Z1 Dimage X21 Coolpix4200 Coolpix4300 Coolpix 2200 Coolpix 3500 Coolpix 3700 Coolpix 4100 Coolpix 5200 Stylus 410 digital 300-digital 300-digital Fuji Fuji Fuji Fuji Fuji Fuji Konica Kyocera Kyocera Kyocera Kyocera Minolta Minolta Minolta Nikon Nikon Nikon Nikon Nikon Nikon Nikon Olympus
appendix CAUTIONS ON HANDLING AND STORING DISCS Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Disc Storage Do not keep in direct sunlight M Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.
General Power Requirements Power Consumption Weight Dimensions Operating Temperature Range Operating Humidity Range Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Video Output Component Video Video/Audio Amplifier HDMI Front speaker output Center speaker output Rear speaker output Subwoofer speaker output Frequency range S/N Ratio Channel separation Input sensitivity AC 120V, 60Hz 90 W 11.5 Ibs 16.9 (W) x 17.3 (H) x 2.
appendix HT-WZ410 Speaker system Speaker Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 5.1ch speaker system Front/Rear Center Subwoofer 3Ω 3Ω 3Ω 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 166W 170W 166W 332W 340W Front/Rear : 3.5 x 5.4 x 3.6 inches Center : 11.8 x 4.0 x 3.6 inches Subwoofer : 7.1 x 12.6 x 15.0 inches 332W Front/Rear : 1.3 Ibs, Center : 2.1 Ibs Subwoofer : 9.
ENG WARRANTY LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND CIS Asia Pacific Middle East & Africa Web Site www.samsung.com/ca www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Code No. AH68-02047M (0.0) HT-WZ410(TWZ412)_XAA_0613.
