HT-Z220 HT-TZ222 HT-TZ225 Digital Home Cinema System user manual Imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.
Features Playback of many disc types This Home Cinema System allows you to play back various discs, including DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD±R/RW. USB Host support You can enjoy media files such as pictures, movies and music saved on a MP3 player, digital camera or USB memory stick by connecting the storage device to the USB port of the Home Cinema.
EnG Safety information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Safety information Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10 cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty.
EnG Contents features 2 What’s included safety information 3 4 Safety Warnings Precautions getting started 7 8 8 8 9 Before Reading the User’s Manual Playable Discs Do not use the following types of disc! Copy Protection Disc Type and Characteristics description 10 10 11 Front Panel Display Rear Panel remote control 12 14 Tour of the Remote Control Setting the Remote Control connections 16 20 22 23 23 24 25 26 Connecting the Speakers Connecting the Wireless Receiving Amplifier Connecting t
Contents system setup 43 43 43 44 45 45 46 46 51 51 52 52 53 53 Setting the Language Setting the HDMI Video Out Mode Setting the TV Screen Type Setting Parental Controls (Rating Level) Setting the Password Setting The Wallpaper To Select one of the 3 Wallpaper Settings You've Made Setting the Speaker Mode Setting the Delay Time Setting up the Speaker Delay Time Setting the Test Tone Setting the Audio Setting the DRC (Dynamic Range Compression) Setting the AV SYNC Setting the HDMI Audio Sound field (DSP)
EnG Before Reading the User’s Manual Make sure to check the following terms before reading the user manual. Icons that will be used in manual d B A G D M Term Definition DVD This involves a function available with DVD or DVD-R/DVD-RW discs that have been recorded and finalised in Video Mode. CD This involves a function available with a data CD (CD-R or CD-RW). MP3 This involves a function available with CD-R/-RW discs. JPEG This involves a function available with CD-R/-RW discs.
Getting started DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie cinema or concert hall. 1 ~ 6 DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player.
EnG Disc Type and Characteristics This product does not support Secure (DRM) Media files. ❖❖ CD-R Discs ❖❖ CD-R MP3 Discs • Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. • MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). • Use discs recorded with a compression/decompression data rate greater than 128Kbps. • Only files with the ".mp3" and ".MP3" extensions can be played.
Description Front Panel 10 FUNC.
EnG Rear Panel 1 2 3 4 5 6 7 ● description FM ANT FM ANT 8 9 10 9 10 TX CARD CONNECTION (WIRELESS) The TX card enables communication between the main unit and the optional wireless receiver amplifier. HDMI OUT JACK U se the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture. External Digital Optical Input Jack Use this to connect external equipment capable of digital output.
Remote control Tour of the Remote Control 1 2 3 20 21 22 23 4 24 5 6 7 25 26 27 28 8 9 29 30 31 10 11 32 12 13 33 14 15 16 17 18 19 12 34 35 36 37 38 39 40
21 POWER button DVD RECEIVER button 3 TV button 4 Number (0~9) buttons 5 AUDIO 6 STEP button 7 Tuning Preset/CD Skip buttons 8 VOLUME button 9 MENU button 10 Cursor/ENTER button 11 INFO button 12 OPEN/CLOSE button DVD DVD 22 23 24 25 26 27 PL II MODE button DVD DVD button TUNER button AUX button PORt button RDS Selection buttons SUBTITLE PAUSE button PLAY button STOP button SEARCH buttons 28 MUTE button 29 TUNING/CH button 30 REMAIN button 31 RETURN button 13 TUNER MEMOR
Setting the Remote Control You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. P ress the TV button to set the remote to TV mode. 2. P ress the POWER button to turn on the TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
No. No. Brand 1 Admiral (M.Wards) 56, 57, 58 44 MTC 18 2 A Mark 01, 15 45 NEC 18, 19, 20, 40, 59, 60 3 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 46 Nikei 03 12, 13, 14 47 Onking 03 Code Brand EnG TV Brand Code List Code AOC 01, 18, 40, 48 48 Onwa 03 5 Bell & Howell (M.
Connections This section involves various methods of connecting the Digital Home Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the DVD Player Place it on a stand or cabinet shelf. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.
EnG Speaker Components HT-Z220 (L) (R) (L) CENTRE REAR SUBWOOFER ● connections FRONT (R) HT-TZ222 SCREW (Small): 10EA CENTRE (L) (R) (L) FRONT SCREW (Large): 2EA (R) REAR STAND SPEAKER CABLE SUBWOOFER STAND BASE HT-TZ225 SCREW (Small): 20EA SCREW (Large): 4EA CENTRE (L) (R) (L) (R) FRONT REAR STAND SPEAKER CABLE SUBWOOFER STAND BASE Front/Rear Tallboy Stand How to Install the Speaker on the Stand HT-TZ222 - Front Speakers HT-TZ225 - Front/Rear Speakers 1.
Connections Connecting the Front, Centre,Rear and Subwoofer Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red terminal(+), and then release the tab. 3. Connect the other end of the speaker cable to the Black Red connecting jacks on the back of the Home Theatre and Wireless Receiving Module. • Make sure the colours of the connecting plugs match the connecting jacks.
EnG Connecting the Front, Rear, Centre and Subwoofer Speakers HT-TZ225 ● connections Centre Speaker Front Speaker (L) Front Speaker (R) ipod AUX IN 2 Rear Speaker (L) Rear Speaker (R) Subwoofer `` Do not let children play with or near the speakers. They could get hurt if a speaker falls. `` When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Connections Connecting the Wireless Receiving Amplifier Wireless Receiving Module (SWA-4000/4100) Centre Speaker Front Speaker (R) Front Speaker (L) ipod Subwoofer HT-Z220/TZ222 HT-TZ225 Rear Speaker (L) Rear Speaker (L) Rear Speaker (R) Rear Speaker (R) WIRELESS RECEIVER MODULE WIRELESS RECEIVER MODULE MM `` The rear speakers for HT-Z220/TZ222/TZ225 can also be connected to the Wireless receiving module (SWA-4000/4100) if you purchase it separately.
2. With the DVD Player turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the main unit. • Hold the TX card so that the slanted side faces to the left and insert the card into the port. • The TX card enables communication between the main unit and the wireless receiver. AUX IN 2 Slanted side face left TX card 4. Plug the power cord of the wireless receiving module in the wall outlet MM `` Place the wireless receiver module at the rear of the listening position.
Connections Connecting the Video Out to your TV Choose one of the three methods for connecting to a TV. FM ANT AUX IN 2 METHOD1 METHOD2 (supplied) METHOD3 METHOD 1 : HDMI Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.HDMI enables you to view movies in High Definition on your HDTV. METHOD 2 : Composite Video Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
EnG HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. ● connections • HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Cinema transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
Connections HDMI FUNCTION Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung With Anynet+ Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Cinema to a SAMSUNG TV using a You can operate this unit, power HDMI Cable. This is only available with SAMSUNG TV's that support on your TV, or watch a movie by Anynet+. pressing the Play button on your 1. Connect the main unit of the Home Cinema to a Samsung TV Samsung TV's remote control.
AUX : Rear Panel EnG Connecting Audio from External Components OPTICAL : Rear Panel ● connections FM ANT Optical Cable (not supplied) Audio Cable (not supplied) If the external Analogue component has only one Audio Out, connect either left or right. External Digital Component External Analogue Component AUX : Connecting an External Analogue Component Analogue signal components such as a VCR. 1. 2. Connect AUX IN (Audio) on the Home Cinema to the Audio Out of the external Analogue component.
Connections Connecting the FM Antenna 1. C onnect the FM antenna supplied to the FM 75Ω COAXIAL Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. FM ANT FM ANT FM Antenna (supplied) MM `` This unit does not receive AM broadcasts. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety.
EnG Before using your home theatre The DVD Home Cinema's remote can be used to control Samsung TV's. 1. Plug the main unit's power cord into the AC power supply. FUNC. 2. Press the DVD RECEIVER button to operate the DVD Home Theatre. 3. Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. 4. Press the TV button to set the remote to TV mode. 5. Press the POWER button to turn on your Samsung TV with this remote. 6.
Playback Disc Playback dB 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Load a disc. • Place a disc gently into the tray with the disc’s label facing up. 3. Close the compartment by pressing the OPEN/CLOSE ( button again. • Playback starts automatically. FUNC. STANDBY ) To stop playback, press the STOP ( ) button during playback. • I f pressed once, PRESS PLAY is displayed and the stop position will be stored in memory.
EnG MP3/WMA-CD Playback Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. 1. Place the MP3/WMA disc on the disc tray. • The MP3/WMA menu screen will appear and playback will start. • The appearance of the menu depends on the MP3/WMA disc. • WMA-DRM files cannot be played. 2. In Stop mode, use the Cursor ,,, button to select the album, and then press the ENTER button. • Use the Cursor , button to select the track. 3.
Playback JPEG File Playback Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theatre. G Slide Mode Place the JPEG disc on the disc tray. • Playback starts automatically. Each image is displayed for 5 seconds and then the next image is displayed. Press the [,] button to skip to the next slide. • Each time the button is pressed, the slide moves backward or forward.
EnG DivX Playback The functions on this page apply to DivX disc playback. D Skip Forward/Back Forward/Reverse Search ● playback During playback, press the [,] button. • Goes to the next file whenever you press the ] button, if there are over 2 files in the disc. • Goes to the previous file whenever you press the [ button, if there are over 2 files in the disc. D During playback, press the (,) button. To play back the disc at a faster speed, press the ( or ) button during playback.
Playback D If the Disc has more than One Subtitle File If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows: 1. In Stop mode, press the Cursor , button, select the desired subtitle ( ) from the TV screen, and then press the ENTER button. 2. When you select the desired DivX file from the TV screen, the movie will be played normally.
EnG Using the Playback Function Displaying Disc Information dBAGD ● playback You can view disc playback information on the TV screen. Press the INFO button. MM `` Depending on the disc, the disc information display may appear different. `` Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC. appears on the TV screen! If this symbol appears on the TV screen when pressing a button, that operation is not possible with the disc currently being played.
Playback Forward/Reverse Search dBAD Press the (,) button. • Each time the button is pressed during playback, the playback speed changes as follows: ( 2X ➞ ( 4X ➞ ( 8X ➞ ( 32X ➞ PLAY ) 2X ➞ ) 4X ➞ ) 8X ➞ ) 32X ➞ PLAY MM `` During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. Slow Playback dD Press the SLOW button.
EnG Using the Playback Function (Con't) dBAGD Repeat Playback ● playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). Press the REPEAT button.
Playback dB A-B Repeat Playback You can repeatedly play back a designated section of a DVD or CD. 1. Press the INFO button twice. 2. Press the Cursor button to move to REPEAT APLAYBACK ( ) display. 3. Press the Cursor , button to select A- and then press the ENTER button. • When the ENTER button is pressed, the selected position will be stored in memory. A -? REPEAT : AÐ 4. Press the ENTER button at the end of the desired segment. • The specified segment will be played repeatedly.
EnG Using the Playback Function (Con't) d Angle Function ● playback This function allows you to view the same scene in different angles. 1. Press the INFO button. 2. Press the Cursor button to move to ANGLE ( ) display. 3. Press the Cursor , button or numeric buttons to select the desired angle. • Each time the button is pressed, the angle changes as follows: 1/3 ➞ 2/3 ➞ 3/3 ➞ 1/3 MM `` The Angle function works only with discs on which multiple angles have been recorded.
Playback d Audio Language Selection Function 1. Press the INFO button twice. 2. Press the Cursor , button or numeric buttons to select the desired audio language. • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. EN 1/3 ➞ SP 2/3 ➞ FR 3/3 ➞ EN 1/3 d Subtitle Language Selection Function 1. Press the INFO button twice. 2. Press the Cursor button to move to SUBTITLE ( display. ) 3.
EnG Using the Playback Function (Con't) dBAG Moving Directly to a Scene/Song ● playback AG Press the numeric buttons. • The selected file will be played. • When playing an MP3 or JPEG disc, you cannot use the Cursor , button to move to a folder. To move a folder, press the STOP ( ) and then press the Cursor , button. MM `` You can press the [,] button on the remote control to move directly to the desired title, chapter, or track.
Playback d Using the Title Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. 1. In Stop mode, press the MENU button. 2. Press the Cursor , button to move to Title Menu. 3. Press the ENTER button. • The title menu appears. d Press the EXIT button to exit the setup screen. MOVE MM `` The Title menu display may be different from disc to disc.
EnG Playing Media Files using the USB Host Feature You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel Home Theatre sound by connecting the storage device to the USB port of the Home Theatre. ● playback 1. Connect the USB device to the USB port on the front of the unit. FUNC. 2. Press the FUNCTION button on the DVD Player or the PORT button on the remote control to select the USB mode.
Playback USB Host Specifications USB Host Specification Non-compliance Operational Limitations • Supports USB 1.1 or USB 2.0 compliant devices. • Supports devices connected using the USB A type cable. • Supports UMS (USB Mass Storage Device) V1.0 compliant devices. • Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16, FAT32) file system. • Does not support a device that requires installing a separate driver on the PC (Windows).
EnG System setup For your convenience, you can set this DVD Home Cinema's features for the best use in your home environment. Setting the Language OSD(On-Screen Display) language is set to English by default. ● system setup LANGUAGE 1. In Stop mode, press the MENU button. BD WISE 2. Press the Cursor % button to move to Setup and then press the ENTER button. 3. Select Language and then press the ENTER button.
System setup Setting the TV Screen Type Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Setup and then press the ENTER button. LANGUAGE BD WISE 3. Press the Cursor % button to move to TV DISPLAY and then press the ENTER button. : ON HDMI VIDEO OUT: RGB TV DISPLAY : WIDE/HDTV PARENTAL : OFF PASSWORD : CHANGE 4.
EnG Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Setup and then press the ENTER button. 3. Press the Cursor % button to move to PARENTAL and then press the ENTER button.
System setup Setting the Wallpaper dG While watching a DVD or JPEG CD, you can set the image you like as background wallpaper. 1. During playback, press the PAUSE button when an image you like appears. 2. Press the LOGO button. • COPY LOGO DATA will be displayed on the TV screen. 3. The power will turn off and then back on. • The selected wallpaper will be displayed. • You can select up to 3 wallpaper settings. COPY LOGO DATA To Select One of the 3 Wallpaper Settings you've made 1.
EnG DivX (R) Registration Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod. Setting the Speaker Mode ● system setup Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTER button.
System setup Setting up the Speaker Delay Time u can When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Centre and Rear Speakers.
EnG Setting the Test Tone Use the Test Tone feature to check the speaker connections. 1. In Stop mode, press the MENU button. 3. Press the Cursor % button to move to TEST TONE and then press the ENTER button. • The test tone will be sent to L ➞ C ➞ R ➞ SR ➞ SL ➞ SW in order. If the ENTER button is pressed again at this time, the test tone will stop. MOVE ENTER RETURN ● system setup 2. Press the Cursor % button to move to Audio and then press the ENTER button.
System setup Setting the Audio Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button. Press the SOUND EDIT button and then press the Cursor , button. Adjusting Front/Rear Speaker Balance `` You can select between 0, -6, and OFF. `` The volume decreases as you move closer to –6. Adjusting Centre/Rear/Subwoofer Speaker Level `` The volume level can be adjusted in steps from +6dB to –6dB. `` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
EnG Setting the AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. ● system setup 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTER button. 3. Press the Cursor % button to move to AV-SYNC and then press the ENTER button. 4. Press the Cursor , button to select the AV-SYNC Delay Time and then press the ENTER button.
System setup Sound Field (DSP)/EQ Function DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. EQ : You can select ROCK, POPS, to optimize the sound for the genre of music you are playing Press the DSP/EQ button. • DSP appears on the display panel.
EnG Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. PL II MODE button to select MUSIC mode. 2. Press the PL II EFFECT button. ● system setup 1. Press the 3. Press the , buttons to select the desired effect setting. • PANORAMA : You can select either 0 or 1. • C- WIDTH : You can select between 0 and 7. • DIMENS : You can select between 0 and 6. P.BASS The P.BASS function provides a bass boost to reinforce the low frequencies. 1. Press the P.BASS button to select P.
Radio Listening to Radio Remote Control 1. Press the TUNER button to select the FM band. 2. Tune in to the desired station. • Automatic Tuning 1 : When the [,] button is pressed, a preset broadcast station is selected. • Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations. • Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally. Main Unit 1. Press the FUNCTION button to select the FM band. 2.
EnG About RDS broadcasting Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
Radio PTY (Program Type) indication and PTY-SEARCH function One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. To search for a program using the PTY codes Before you start, remember... • • • • The PTY Search is only applicable to preset stations. To stop searching any time during the process, press PTY SEARCH while searching. There is a time limit in doing the following steps.
EnG Convenient function Sleep Timer Function You can set the time that the Home Cinema will shut itself off. Press the SLEEP button. ● convenient function • SLEEP will be displayed. Each time the button is pressed, the preset time in minutes changes as follows : 10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF. To confirm the sleep timer setting, press the SLEEP button. • The remaining time before the Home Cinema will shut itself off is displayed.
Convenient function CD rIPPING Converts audio sound of the CD into a MP3 file format before sending to a USB storage device. B 1. Connect the USB device. FUNC. 2. Insert the audio CD into the CD tray. 3. Press the CD RIPPING button. • To start ripping the current track, press the CD RIPPING button on the remote control while the system is playing a track or stopped temporarily. • To rip the entire CD, press and hold the CD RIPPING button on the remote control.
EnG Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre. SYMPTOM Check/Remedy ● troubleshooting Disc tray does not open. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on.
Troubleshooting SYMPTOM Check/Remedy Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed. • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only.
EnG Language code list Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 43).
Appendix Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Disc Storage Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.
General 70 W Weight 3 Kg Dimensions 430 (W) x 70 (H) x 260 (D) mm Operating Temperature Range +5°C~+35°C Operating Humidity Range 10 % to 75 % CD : 12 cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video ● APPENDIX Power Consumption DVD (Digital Versatile Disc) Disc EnG Specifications Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec.
HT-Z220 Speaker system Speaker Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 5.1ch speaker system Front/Rear Centre 3Ω 3Ω 140Hz~20KHz 140Hz~20KHz 86dB/W/M 86dB/W/M 141W 141W 282W 282W Front : 100 x 150 x 89 mm Rear : 100 x 100 x 93 mm Centre : 300 x 59 x 50 mm Subwoofer : 180 x 320 x 380 mm Subwoofer 3Ω 45Hz~160Hz 86dB/W/M 145W 290W Front : 1.0 kg, Centre : 0.3 kg Rear : 0.6 kg, Subwoofer : 4.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Region North America Latin America Europe CIS Asia Pacific Middle East & Africa Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.