HT-X715 HT-TX715 Digital Home Cinema System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register HT-X715_ELS_ENG_0421.
features Playback of many different disc types This Home Cinema System allows you to play back various discs, including DVD-AUDIO, DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD±R/RW. DVD-Audio compatible Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.
EnG safety information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
safety information PrECAUTIONS Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10 cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty.
EnG contents features 2 What’s included safety information 3 4 Safety Warnings Precautions getting started 7 8 8 8 9 Before Reading the User’s Manual Playable Discs Do not use the following types of disc! Copy Protection Disc Type and Characteristics description 10 11 Front Panel Rear Panel remote control 12 14 Tour of the Remote Control Setting the Remote Control connections 16 20 22 24 25 27 Connecting the Speakers Connecting the Optional Wireless Receiving Amplifier Connecting the Video
contents system setup 54 54 55 56 56 57 Setting the Language Setting TV Screen Type Setting Parental Controls (Rating Level) Setting the Password Setting the Wallpaper To Select One of the 3 Wallpaper Settings You've Made DVD Playback Mode Setting the SPEAKER MODE Setting the Delay Time Setting the Test Tone Setting the Audio Setting the DRC (Dynamic Range Compression) Setting the AV SYNC Setting the HDMI Audio Sound Field (DSP)/EQ Function Dolby Pro Logic II Mode Dolby Pro Logic II Effect ASC (Auto Sound
EnG getting started Before Reading the User’s Manual Make sure to check the following terms before reading the user manual. Icons that will be used in manual B A G D M M Term Definition DVD This involves a function available with DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. CD This involves a function available with a data CD (CD-R or CD-RW). MP3 This involves a function available with CD-R/-RW discs, including USB.
getting started DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie cinema or concert hall. 1 ~ 6 DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player.
EnG Disc Type and Characteristics This product does not support Secure (DRM) Media files. ❖ CD-R Discs ❖ CD-R MP3 Discs ~ Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. ~ MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). ~ Use discs recorded with a compression/decompression data rate greater than 128Kbps. ~ Only files with the ".mp3" and ".MP3" extensions can be played.
description FrONT PANEL 8 9 10 11 7 POWER( ) BUTTON PLAY/PAUSE ( ) BUTTON AUX IN 1 JACK FUNCTION BUTTON TUNING UP & SKIP ( ) BUTTON 10 HEADPHONE JACK TUNING DOWN & SKIP ( ) BUTTON VOLUME CONTROL 11 USB PORT STOP (T) BUTTON DISC TRAY 10 HT-X715_ELS_ENG_0421.
1 ENG rEAr PANEL 4 ● DESCrIPTION 5.1 CHANNEL SPEAKER OUTPUT CONNECTORS Connect the front, center, rear, subwoofer speakers. COMPONENT VIDEO OUTPUT JACKS Connect a TV with Component video inputs to these jacks. AUX IN 2 JACKS Connect to the 2CH analog output of an external device (such as a VCR) VIDEO OUTPUT JACK Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack. EXTERNAL DIGITAL OPTICAL INPUT JACK Use this to connect external equipment capable of digital output.
remote control Tour of the Remote Control 1 2 3 19 20 21 22 4 5 6 7 23 24 25 8 26 9 27 28 29 30 10 31 11 32 12 13 14 15 16 17 18 33 34 35 36 37 38 39 12 HT-X715_ELS_ENG_0421.
20 PORt button 2 TV button 21 TV/VIDEO button 3 POWER button 22 EJECT button 4 NUMBER (0~9) buttons 23 CANCEL button 5 REMAIN button 24 PAUSE button 6 STEP button 7 TUNING PRESET/CD SKIP buttons 8 VOLUME button 26 TUNING/CH button 9 MENU button 27 MUTE button 10 AUDIO button 28 RETURN button 29 CURSOR/ENTER button 30 SUBTITLE button 11 25 PL II MODE button PLAY button STOP button SEARCH buttons 12 TUNER MEMORY, SD(Standard Definition)/HD(High Definition) button 13
remote control SETTING THE rEMOTE CONTrOL You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the TV button to set the remote to TV mode. . Press the POWEr button to turn on the TV. . While holding down the POWEr button, enter the code corresponding to your brand of TV. ~ If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
No. No. Brand 1 Admiral (M.Wards) 56, 57, 58 44 MTC 18 2 A Mark 01, 15 45 NEC 18, 19, 20, 40, 59, 60 3 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 46 Nikei 03 12, 13, 14 47 Onking 03 Code Brand EnG TV Brand Code List Code AOC 01, 18, 40, 48 48 Onwa 03 5 Bell & Howell (M.
connections This section involves various methods of connecting the Digital Home Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of Digital Home Cinema Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
ENG Front/rear Tallboy Stand (HT-TX715 only) Speaker Components SCREW (Large) : 4EA STAND STAND BASE ● CONNECTIONS SPEAKER SCREW (Small) : 16EA How to Install the Speaker on the Stand 1. Turn the STAND upside-down and connect it to the STAND BASE. 1 STAND BASE STAND . Turning the SCrEW (Small) clockwise, connect it to four holes marked with the arrow using a screwdriver as shown in the illustration. . Connect the assembled stand to the SPEAKEr. SPEAKER STAND 4.
connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. . Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. . Connect the connecting plugs to the back of the Home Cinema. ~ Make sure the colors of the speaker terminals match the colors of the connecting plugs.
Front Speaker (R) ENG HT-TX715 Front Speaker (L) ● CONNECTIONS Center Speaker Subwoofer Rear Speaker (R) J Rear Speaker (L) ` Do not let children play with or near the speakers. They could get hurt if a speaker falls. ` When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. ` Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or other objects into the duct (hole) of the subwoofer speaker.
connections CONNECTING THE OPTIONAL WIrELESS rECEIVING AMPLIFIEr To connect the rear speakers by wireless, you have to purchase the wireless receiving module and TX card from your Samsung retailer.
RESET EnG ` Place the wireless receiver module at the rear of the listening J ` Do not insert any other card except the TX card dedicated to the product. The product might be damaged or position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference. ` If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (5.
connections CONNECTING THE VIDEO OUT TO YOUr TV Choose one of the three methods for connecting to a TV. METHOD2 METHOD3 (supplied) METHOD1 (supplied) s METHOD 1 : HDMI Connect a HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
EnG HDMI Auto Detection Function The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. ~ HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Cinema transmits a digital video and audio signals and displays a vivid picture. ~ Why does Samsung use HDMI? Analog TVs require an analog video/audio signal.
connections HDMI FUNCTION resolution Selection This function allows the user to select the screen resolution for HDMI output. In Stop mode, press and hold the SD/HD (Standard Definition/High Definition) button on the remote control for longer than 5 seconds. ~ Resolutions available for the HDMI output are 576p(480p), 720p, 1080i/1080p. ~ SD(Standard Definition) resolution is 576P(480p) and HD (High Definition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 576P(480P).
EnG Connecting Audio from External Components AUX1 : Connecting an External Component/MP3 player Components such as an MP3 Player ● connections Audio Cable (not supplied) Audio OUT 1. Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out of the external component/MP3 player. . Press the AUX button on the remote control to select AUX1 input. ~ You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 USB BT AUDIO TUNER.
connections AUX2 : rear Panel OPTICAL : rear Panel Audio Cable (not supplied) Optical Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. External Analog Component External Digital Component AUX2 : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component. ~ Be sure to match connector colors. .
ENG CONNECTING THE FM ANTENNA 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack. . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ● CONNECTIONS FM Antenna (supplied) M ` This unit does not receive AM broadcasts. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. ~ Make sure the unit is well-ventilated.
before using your home cinema The DVD Home Cinema's remote can be used to control Samsung TVs. 1. Plug the main unit's power cord into the AC power supply. . Press the DVD rECEIVEr button to switch to DVD RECEIVER mode to operate the DVD Home Cinema. . Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. 4. Press the TV button to set the remote to TV mode. . Press the POWEr button to turn on your Samsung TV with this remote. .
ENG playback DISC PLAYBACK B ● PLAYBACK 1. Load a disc vertically into the Disc Insert Hole. ~ Place a disc gently into the tray with the disc’s label facing up. . Close the compartment by pressing the PLAY ( ~ Playback starts automatically. ) button. To stop playback, press the STOP (@) button during playback. ~ If pressed once, PrESS PLAY is displayed and the stop position will be stored in memory. If the PLAY ( ) button or ENTEr button is pressed, playback resumes from the stop position.
playback MP3/WMA-CD PLAYBACK Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. A 1. Load the MP3/WMA disc. ~ The MP3/WMA menu screen will appear and playback will start. ~ The appearance of the menu depends on the MP3/WMA disc. ~ WMA-DRM files cannot be played. . In Stop mode, use the Cursor $, %, _, + button to select the album, and then press the ENTEr button. ~ Use the Cursor $, % button to select the track. .
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Cinema. ENG JPEG FILE PLAYBACK G rotate/Flip Function Press the Cursor $, %, _, + button during playback. ● PLAYBACK button: Flip Vertically button: Rotate 90° Counterclockwise button: Rotate 90° Clockwise Original Image button: Flip Horizontally ENTER SELECT M ` The maximum resolutions supported by this product are 5120 x 3480 (or 19.
playback DIVX PLAYBACK The functions discussed on this page apply to DivX disc playback only. D Skip Forward/Back During playback, press the [, ] button. ~ Goes to the next file whenever you press the ] button, if there are over 2 files on the disc. ~ Goes to the previous file whenever you press the [ button, if there are over 2 files on the disc. Fast Playback D During playback, press the (, ) button. To play back the disc at a faster speed, press the ( or ) button during playback.
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows: ENG D If the Disc has more than One Subtitle File 1. In Stop mode, press the Cursor $, % button, select the desired subtitle ( ) from the TV screen, and then press the ENTEr button.
playback USING THE PLAYBACK FUNCTION Displaying Disc Information BAGD You can view disc playback information on the TV screen. Press the INFO button. M ` Depending on the disc, the disc information display may appear different. ` Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC. appears on the TV screen! If this symbol appears on the TV screen when pressing a button, that operation is not possible with the disc currently being played.
BAD Press the (, ) button. ~ Each time the button is pressed during playback, the playback speed changes as follows: ENG Fast Playback ( 2X ➞ ( 4X ➞ ( 8X ➞ ( 32X ➞ PLAY M ` During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. Slow Playback ● PLAYBACK ) 2X ➞ ) 4X ➞ ) 8X ➞ ) 32X ➞ PLAY D Press the SLOW button.
playback repeat Playback BAGD Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). Press the rEPEAT button.
ENG A-B repeat Playback You can repeatedly play back a designated section of a DVD. 1. Press the INFO button twice. A . Press the Cursor + button to move to REPEAT PLAYBACK ( ) display. ● PLAYBACK . Press the Cursor $, % button to select A- and then press the ENTEr button. A -? the selected position ~ When the ENTEr button is pressed, REPEAT : AÐ will be stored in memory. 4. Press the ENTEr button at the end of the desired segment. ~ The specified segment will be played repeatedly.
playback Angle Function This function allows you to view the same scene in different angles. 1. Press the INFO button. . Press the Cursor + button to move to ANGLE ( display. ) . Press the Cursor $, % button or numeric buttons to select the desired angle. ~ Each time the button is pressed, the angle changes as follows: 1/3 M 2/3 3/3 1/3 ` The Angle function works only with discs on which multiple angles have been recorded.
DVD-AUDIO Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and the key number. ENG Bonus Group When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically. ● PLAYBACK M ` If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number. Navigating Pages DVD-AUDIO During playback, press the ., , button on the remote control.
playback Subtitle Language Selection Function 1. Press the INFO button twice. . Press the Cursor + button to move to SUBTITLE ( display. ) . Press the Cursor % button or numeric buttons to select the desired subtitle. EN 01/03 SP 02/03 Fr 03/03 OFF/03 EN 01/03 M ` To operate this function, you can also press the SUBTITLE buttons on the remote control. ` Depending on the disc, the Subtitle Language functions may not be available. BAG Moving Directly to a Scene/Song B 1.
ENG Using the Disc Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. 1. In Stop mode, press the MENU button. ● PLAYBACK . Press the Cursor $, % button or numeric buttons to move to Disc Menu and then press the ENTEr button. ~ When you select Disc Menu and it is not supported by the disc, the "This menu is not supported" message appears on the screen. . Press the Cursor $, %, _, + button to select the desired item. 4.
playback USING BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires! What is Bluetooth? Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection. ~ A Bluetooth device may cause a noise or malfunction, depending on usage. ~ When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema System.
EnG To disconnect the Bluetooth device from the Home Cinema System You can disconnect the Home Cinema System from the Bluetooth device. (refer to Bluetooth deivice's user's manual) ~ The Home Cinema System will be disconnected. ~ When the Home Cinema System is disconnected from the Bluetooth device, the Home Cinema System will display "Disconnect" on the front display. Press the FUNCTION button on the front panel of the home cinema system to switch from “BT AUDIO” to another mode.
playback PLAYING MEDIA FILES USING THE USB HOST FEATUrE You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel Home Cinema sound by connecting the storage device to the USB port of the Home Cinema. 1. Connect the USB device to the USB port on the side of the unit. . Press the FUNCTION button on the DVD Player or the POrT button on the remote control to select the USB mode.
ENG Fast playback During playback, press the (, ) button. ~ Each time you press either button, the playback speed will change as follows: 2x 4x 8x 32x Normal. 1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in Windows (2000 or later) without additional driver installation.) . MP3 Player: HDD and flash type MP3 players. ● PLAYBACK Compatible Devices . Digital camera: Cameras that support USB Mass Storage v1.0.
system setup For your convenience, you can set this Home Cinema System's features for the best use in your home environment. Setting the Language OSD(On-Screen Display) language is set to English by default. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Setup and then press the ENTER or + button. . Select Language and then press the ENTER or + button. 4. Press the Cursor $,% button to select OSD Language and then press the ENTER or + button.
EnG Setting TV Screen Type Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Setup and then press the ENTER or + button. . Press the Cursor % button to move to TV DISPLAY and then press the ENTER or + button. MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT ● system setup 4. Press the Cursor $,% button to select the desired item and then press the ENTER button.
system setup Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Setup and then press the ENTER or + button. . Press the Cursor % button to move to PARENTAL and then press the ENTER or + button. 4. Press the Cursor $,% button to select the desired rating level and then press the ENTER button.
G ENG SETTING THE WALLPAPEr While watching a DVD or JPEG CD, you can set the image you like as background wallpaper. 1. During playback, press the PAUSE ( ) button when an image you like appears. ● SYSTEM SETUP . Press the LOGO button. ~ COPY LOGO DATA will be displayed on the TV screen. . The power will turn off and then back on. ~ The selected wallpaper will be displayed. ~ You can select up to 3 wallpaper settings.
system setup DVD Playback Mode Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. 1. Press the MENU button while the disc tray is open. . Press the Cursor % button to move to Setup and then press the ENTER or + button. MOVE ENTER RETURN EXIT MOVE ENTER RETURN EXIT . Press the Cursor % button to move to DVD TYPE and then press the ENTER or + button. 4.
EnG Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Audio and then press the ENTER or + button. ● system setup . Press the Cursor % button to move to DELAY TIME and then press the ENTER or + button. 4. Press the ENTER button. . Press the Cursor _, + button to set the Delay time.
system setup Setting the Test Tone Use the Test Tone feature to check the speaker connections. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Audio and then press the ENTER or + button. . Press the Cursor % button to move to TEST TONE and then press the ENTER or + button. ~ The test tone will be sent to L C R SR SL SW in order. ~ If the ENTER button is pressed again at this time, the test tone will stop.
ENG Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button. Press the SOUND EDIT button and then press the Cursor _, + button. ~ Each time you press the SOUND EDIT button, you can see the balance and level for each speaker. ● SYSTEM SETUP Adjusting Front/rear Speaker Balance ` You can select between 0 dB, -6 dB, and OFF. ` The volume decreases as you move closer to – 6 dB. Adjusting Center/rear/Subwoofer Speaker Level ` The volume level can be adjusted in steps from +6dB to –6dB.
system setup Setting the AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video. 1. In Stop mode, press the MENU button. . Press the Cursor % button to move to Audio and then press the ENTER or + button. . Press the Cursor % button to move to AV-SYNC and then press the ENTER or + button. 4. Press the Cursor $, % button to select the AV-SYNC Delay Time and then press the ENTER button.
ENG SOUND FIELD (DSP)/EQ FUNCTION DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing Press the DSP/EQ button. ~ DSP appears on the display panel.
system setup DOLBY PrO LOGIC II MODE You can select the desired Dolby Pro Logic II AUDIO mode. Press the PL II MODE button. ~ Each time the button is pressed, the mode changes as follows. MUSIC ➞ CINEMA ➞ PrO LOGIC ➞ MATrIX ➞ STErEO ➞ MUSIC PrO LOGIC II ~ MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance. ~ CINEMA : Adds realism to the movie soundtrack.
ENG ASC (Auto Sound Calibration) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment.
system setup ASC (Auto Sound Calibration) SETUP 1. Plug the ASC microphone into the ASC input jack. . Place the ASC microphone at the listening position. . Press ASC button. ~ To create the optimal 5.1 channel sound field, the selections are in the following sequence: L ➞ C ➞ r ➞ Sr ➞ SL ➞ SW 4. When the message "REMOVE MIC" appears in the display, unplug the ASC microphone. M ` Setting the ASC function takes about 3 minutes. To cancel the ASC (Auto Sound Calibration) setup, press ASC button.
ENG radio LISTENING TO rADIO remote Control ● rADIO 1. Press the TUNEr button to select the FM band. . Tune in to the desired station. ~ Automatic Tuning 1 : When the [, ] button is pressed, a preset broadcast station is selected. ~ Automatic Tuning 2 : Press and hold the ,, . button to automatically search for active broadcasting stations. ~ Manual Tuning : Briefly press the ,, . button to increase or decrease the frequency incrementally. Main Unit 1. Press the FUNCTION button to select the FM band.
convenient function SLEEP TIMEr FUNCTION You can set the time that the Home Cinema will shut itself off. Press the SLEEP button. ~ SLEEP will be displayed. Each time the button is pressed, the preset time changes as follows : ➞ 10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF To confirm the sleep timer setting, press the SLEEP button. ~ The remaining time before the Home Cinema will shut itself off is displayed. ~ Pressing the button again changes the sleep time from what you have set earlier.
ENG P.BASS P.BASS function stresses low tones providing thudding sound effects. Press the P.BASS button to select P.BASS mode. P BAS ON P BAS OFF ` The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen. ` The P.BASS does not work with DSP/EQ or DOLBY PRO LOGIC ll modes. If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.
troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. SYMPTOM Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start.
Check/Remedy EnG SYMPTOM • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed.
language code list Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 46).
EnG USB host feature supported products Digital Camera Company Fuji Fuji Fuji Fuji Fuji Fuji Konica Kyocera Kyocera Kyocera Kyocera Minolta Minolta Minolta Nikon Nikon Nikon Nikon Nikon Nikon Nikon Olympus Olympus Olympus Type Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camer
appendix Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Disc Storage Do not keep in direct sunlight M Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.
General 90 W Weight 4.2 kg Dimensions 449.6 (W) x 251.5 (H) x 99.1 (D) mm Operating Temperature Range +5°C~+35°C Operating Humidity Range 10 % to 75 % CD : 12 cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video ● appendix Power Consumption DVD (Digital Versatile Disc) Disc EnG Specifications Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec.
appendix Specifications HT-X715 Speaker system Speaker Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 5.1ch speaker system Front/Center/Rear Subwoofer 3Ω 3Ω 140Hz~20KHz 35Hz~160Hz 86dB 86dB 133W 135W 266W 270W Front : 96.5 x 535.9 x 101.6 mm (stand base : ø190.5) Rear : 109.2 x 246.4 x 218.4 mm Center : 376 x 83.5 x 142 mm Subwoofer : 217 x 362 x 412 mm Front : 2.2 kg, Rear : 0.9 kg Center : 1.2 kg, Subwoofer : 6.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CIS Asia Pacific Middle East & Africa HT-X715_ELS_ENG_0421.indd 69 Web Site www.samsung.com/ca www.samsung.com www.samsung.
AH68-02090B HT-X715_ELS_ENG_0421.
