DVD HOMETHEATER SYSTEM Firmware Update Contents 1. Check Product’s F/W Version 2.
1. Check Product’s FIRMWARE Version - Turn on the product. Make the tray open by pressing ONEN/CLOSE button. - Press MENU button on the remote controller, then press Numeric button 8,9,5.
- Product’s FIRMWARE Version and File name is displayed in screen. 1 2 ① : It shows Firmware version of product Above screen, The Version is 1.12. ② : It shows Firmware File name of product. Above screen The file name is PDADVIDS.ROM.
2. UPDATE by Disc or USB Device - In case of Using a disc, Make an update disc under below recommendation. . Disc type : ISO type . Multi-session : No Multi-session . Recording speed : under 8x - You can update new F/W, by playing the update disc - For the USB HOST playback supported model, Copy F/W file to USB device .Format the USB Device .
- Turn on the product, Play an Update disc or a USB Device - Firmware update is carried, repeating ERASE and WRITE after READING - After Update complete, The set goes to turn off and turn on state automatically. - Press ■(STOP) button on the main unit in “No disc“ condition.
- Pressing the button continuously until INITIAL display in the Display window - In power off condition, Press ■(STOP) button on the main unit again. - Pressing the button until the Standby LED on the main unit blink.
