User Manual
Table Of Contents
- 01 Checking the Components
 - 02 Product Overview
 - 03 Connecting the Soundbar
 - 04 Connecting to your TV
 - 05 Connecting an External Device
 - 06 Connecting a USB Storage Device
 - 07 Connecting a Mobile Device
 - 08 Using the Remote Control
 - 09 Installing the Wall Mount (Optional)
 - 10 Placing the Soundbar on a TV stand
 - 11 Software Update
 - 12 Troubleshooting
 - 13 License
 - 14 Open Source License Notice
 - 15 Important Notes About Service
 - 16 Specifications and Guide
 
ENG - 43
12  TROUBLESHOOTING
Refer to the table below if this product does not function properly. If the problem you are experiencing 
is not listed below or if the instructions below do not help, turn off the product, disconnect the power 
cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Soundbar does not turn on.
 ; Check whether the power cord of the 
Soundbar is correctly inserted into the 
outlet.
Soundbar works erratically.
 ; After removing the power cord, insert it 
again.
 ; Remote the power cord from the external 
device and try again.
 ; If there is no signal, the Soundbar 
automatically turns off after a certain 
period of time. Turn on the power.  
(See page 30)
In case the remote control does not work.
 ; Point the remote directly at the Soundbar.
 ; Replace the batteries with new ones.
Soundbar does not output any sound.
 ; The volume of the Soundbar is too low or 
muted. Adjust the volume.
 ; When any external device (STB, Bluetooth 
device, mobile device, etc.) is connected, 
adjust the volume of the external device. 
 ; For sound output of the TV, select 
Soundbar. (Samsung TV: Home (   ) → 
Settings (   ) → Sound → Sound Output → 
Select Soundbar)
 ; The cable connection to the Soundbar may 
not be loose. Remove the cable and 
connect again.
 ; Remove the power cord completely, 
reconnect, and turn the power on.
 ; Reset the product and try again.  
(See page 42)
Soundbar does not connect via Bluetooth.
 ; Press the  PAIR button 
to pair a new.
 ; If the Soundbar is connected to another 
device, disconnect that device rst to 
switch the device.
 ; Reconnect it after removing the Bluetooth 
speaker list on the device to connect. 
(Samsung TV: Home (   ) → Settings (   ) 
→ Sound → Sound Output → Bluetooth 
Speaker List)
 ; Remove and reconnect the power plug, 
then try again.
 ; Reset the product and try again.  
(See page 42)
Sound drops out when connected via 
Bluetooth.
 ; Some devices can cause radio interference 
if they are located too close to the 
Soundbar. e. g. microwaves, wireless 
routers, etc.
 ; If your device that is connected via 
Bluetooth moves too far away from the 
Soundbar, it may cause the sound to drop 
out. Move the device closer to the 
Soundbar.
 ; If a part of your body is in contact with the 
Bluetooth transceiver or the product is 
installed on metal furniture, sound may 
drop out. Check the installation 
environment and conditions for use.
Soundbar does not turn on automatically with 
the TV.
 ; When you turn off the Soundbar while 
watching TV, power synchronization with 
the TV is disabled. First turn off the TV. 










