the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Important Safety Instructions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment.
Safety Information Precautions • Ensure that the AC power supply in your house complies with specifications listed on the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5-1 Ocm I 20-25 inches). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product.
Contents SAFETY INFORMATION 2 3 4 Safety Warnings Important Safety Instructions Precautions GETTING STARTED 7 8 9 9 10 11 12 Key features of your new AV Receiver Accessories Description Front Panel Display Rear Panel Remote Control CONNECTIONS 16 18 19 20 22 23 24 25 26 27 28 30 30 Speaker Positioning Connecting the Speakers Connecting the Bi-AMP Speaker Connecting External Devices/your 1V via HDMI HDMI Function Connecting to your 1V Connecting a DVD or BD(Biu-ray) Player Connecting a Cable, Satelli
Contents OP.ERATION 50 50 51 52 52 53 53 54 54 54 55 55 56 56 56 57 57 • 6 Using the Surround Modes Using the AUDIO EFFECT Button On the Front of the Main Unit Using the S.DIRECT Button Using the SUBWOOFER button Listening to the Radio To Listen in Mono/Stereo Presetting Radio Stations .
Getting Started ..... 0 Key features of your new AV Receiver Product Features Digital AV Receiver This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. Dolby Digital Effective audio encoding/decoding technology that provides a vivid surround sound in up to 5.1 channels. Dolby Pro Logic llx Dolby Pro Logic llx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.
Getting Started DTS-ES (Extended Surround) 0 E x r E N ° E The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. SURROUND Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360-degree surround effect. DTS-ES adds an additional rear center surround channel for 6.
0 ....... Description Front Panel SI\MSUNG 0 0 0 A.VSYNC = ...,Sflf CT-. ~ 0000()0 LJ 20 OJ w w w INPUT SELECT CONTROL Used to select a source. FM -+ TV -+ BD/DVD -+ SAT -+ GAME -+ AUX -+ CD -+ IPOD AUDIO IPOD VIDEO SETUP BUTTON Displays the SETUP menu. AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source. AUDIO EFFECT BUTTON Toggles to select asurround sound mode. -+ [[] []] 3D SOUND BUTTON Press to apply 3D Sound effect.
Getting Started [HJ PHONES JACK Used to connect a set of headphones. [1]] [!§] [tJ [j]J G]J [gQJ (W AUXIN JACKS Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device. ASC MICJACK Used to connect the ASC MIC for setting up Auto calibration. RETURN SUTION Return to the previous menu. AV SYNC SUlTON Used to select the Audio Delay Mode. TUNING MODE SUlTON Used to select the Manual or Preset mode for FM radio.
0 ...... Rear Panel !41 [I~ j_ i__l_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _----,... I til ~'~-'-~'-· ~·.·~~·~~·~· ~E:J~·~~~·~·~~'~·123~~~· ·~ "- ·- -'] i ,...-···------~--~·-··-····------·-· ___ _j w VIDEO IN JACKS Receives the video signal from a video player (80/DVD, SAT, TV). USB PORT Can be only used for firmware upgrades. HDMI OUT JACKS Outputs digital video and audio signals simultaneously using an HDMI cable.
Getting Started Remote Control Tour of the Remote Control • A -+--+--+-- TUNING •• /CH v 12 English 29
0 ...&. G) CD POWER BUTTON Turns the receiver on/off. (!) TV BUTTON To change to 1V mode, press the 1V button. rn ~ :r
Getting Started ~ ~ ~ DIMMER BUTION Adjusts the brightness of the display. DSPBUTION Used to select the SFE mode. AUDIO ASSIGN BUTION Toggles to select an input mode for the selected source. SEARCH BUTION Press to search backwards or forwards. PAUSEBUTION Pauses playback on a connected device. TUNING/CHANNEL BUTIONS Used to change the radio broadcasting frequency or TV channel. S.DIRECT BUTION Press to select S.DIRECT mode. TUNER MEMORY BUTION Used to set a preset radio frequency.
Installing batteries in the Remote Control * Battery size: AAA •• ••• .... ~NOTE ········ ••••• .. .. ········ •• •• •• •• •• • • Follow these precautions to avoid leaking or cracking cells: ~ 11 ~ Place batteries in the remote control so they match the polarity: (+)to(+) and(-) to(-). Assuming typical AVR usage, the batteries last for about one year. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time.
Connections This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Speaker Positioning There are two methods for positioning the speakers. When using Dolby Pro Logic liz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT terminal(s). * Speakers are provided with model HW-07708 only.
Center Speaker (9 It is best to install it at the same height as the front speakers. You can also install it directly over or under the 1V. Surround Speakers-~ Place these speakers behind. your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Connections I Connecting the Speakers Connecting Speaker Wire 1. Loosen the knob by turning counterclockwise. 2. Insert the bare part of the wire into the hole in the side of each terminal. 3. Tighten the knob by turning clockwise to secure the wire. 1. FRONT (R) SURROJND (R) SJFRJJNJ 00< (R) SURfU.ND 00< W 3.
Connecting the Bi-AMP Speaker Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port respectively as appropriate. Then, you can use the bi-amplification feature that supports enriched high range and base tones. Bi-AMP Speaker R Bi-AMP Speaker L Tweeter Tweeter Woofer Woofer 1. Connect the FRONT L connector (rear side of main unit) to the Tweeter port in the front left speaker. 2.
Connections Connecting External Devices/your TV via HOM I HOM I is a digital standard interface for connection to such devices as a 1V, projector, DVD player, Blu-ray player, set-top box and more. HOM I removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
MAIN Jack • Supports Anynet+ and ARC. • Supports Full HD and 3D. SUB Jack • Does not support Anynet+ and ARC. • When both Main and SUB are connected at the same time, output signal of SUB will be the same to that of Main, which matches specifications of the 1V connected to the Main jack.
Connections HDMI Function Using Anynet+ (HDMI-CEC) Anynet + is a function that enables you to control other Sam sung Devices with your Samsung TVI s remote control. Anynet + can be used by connecting this AV Receiver to a SAM SUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1 . Connect the AV receiver to a Samsung TV with an HOM I cable. (See page 20) 2. Set the Anynet + function on your TV.
0 1\) Connecting to your TV ' " ... ... ~ VIDEO IN y ... or Ps . ... PR COMPONENT IN OPTICAL OUT AUDIO OUT TV Video Connection If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (PR, Ps and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your 1V.
Connections Connecting a DVD or BD(Biu-ray) Player VIDEO IN COMPONENT IN Y Pa TV Po ~m t" or t" . :.::- --- .;:: : : : I ;~~ ~·&; '"'..,::"' >..'0 (~J ~ (~ . ;~~i:~ c= ; r=::J z·= J ; : : : :.-----·· _; l I I : ;-~ l 1" or lt- !1" :1--i
0 0 ::J ::J Connecting a Cable, Satellite or Set-top Box CD () ,... VIDEO IN c:r COMPONENT IN '• fff• ::J TV en -- ~·Nw or ~ ': < i ;, i 1 ~6 ~·A~[OJ ~c:EO 0 0~ ~00 GUT L R AUDIO OUT l Y Ps PR [":ooo_c:=J_:J SAT(Cable/Satellite/Set-top box) COMPONENT OPTICAL OUT OUT or J Video Connection Connect a Component video cable (not supplied) from the COMPONENT IN (SAT) (PR, Ps andY) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT.
Connections Connecting a CD Player • • • or ~ ~ OPTICAL OUT COAXIAL OUT ~ ~ 6) (: I CD Player Audio Connection Connect the Digitalin put (COAXIAL, OPTICAL1-3) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. ~NOTE Connect the audio cable's red plug to the red jack and white cable to the white jack.
0 1\) (') 0 Connecting Using the External Amplifier (Ex. Second Room) ::::J ::::J (I) This setup allows 7.1-channel playback in your main listening room and 2-channel stereo playback in Second Room, with a same source in each room. • Use an RCA audio cable to connect the AV receiver's LINE OUT UR jacks to an analog audio input on your Second Room amplifier. • Connect your Second Room speakers to the speaker terminals on your Second Room amplifier. OJ I .
Connections Connecting an iPod You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see this page and pages 54 - 55. 1. Connect the iPod dock connector to the iPod jack on your reciever. 2. Place the iPod in the Dock. • If you want to play a movie stored in your iPod player, you should set the player's TV Out option to On before inserting it into the dock. See pages 54 -55. 3. Press the iPod button on the remote control.
Disconnecting an iPod Follow the steps below to prevent damage to an iPod and data when disconnecting from your AV receiver. 1. Use the INPUT SELECT on the main unit to switch to a mode other than IPOD AUDIO or IPOD VIDEO. OR 1. Turn off the AV Receiver. 2. Disconnect the iPod player from the iPod dock, or remove the iPod dock connector from the AV receiver.
Connections Connecting the FM Antenna 1 . Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. 1 FM ~~ FM antenna (supplied) ~NOTE Do not place the antenna cable close to the power cord. Keep it as far away as possible. If you experience poor FM reception, use an external antenna.
Setup For your convenience, you can set this AV receiver's features for the best use. Before Using the AV Receiver Turning On/Off Connect the power plug to the outlet. This unit will set to Standby mode. Press the POWER button on the main unit for 2 seconds. • This unit will be turned on. • You can also turn the unit on/off by pressing the POWER button on the remote control. Remote Control Functions You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control.
Setup Selecting Digitai/HDMI/Analog You can listen to sound of analog, HDMI, optical input using this unit. 1. Press the INPUT SELECT button on the remote control to select a desired function (BD/DVD, SAT, TV, CD, AUX). See page 31. 2. Press the AUDIO ASSIGN button on the remote control to select the audio input source of the external device you have connected. • Each time you press this button, the input mode changes as follows: • For BD/DVD function n!,·n i i n ilri T r·, u ,., 1 Li!t' L.
Setup Menu Tree Here's a quick look at how the setup menus are organized on your AV Receiver. BD/DVD ··········································································:···>······························································: OPTICAL 1; 2 COAXIAL OPTICAL1, 2 COAXIAL OPTICAL1, 2 COAXIAL ...................................................................... :..................................................................: SAT ......................................................
Setup FRONT LARGE SMALL CENTER LARGE SMALL NONE SURROUND LARGE SMALL NONE SURROUND BACK LARGE SMALL NONE FRONT HEIGHT LARGE SMALL SUBWOOFER YES NO 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz CROSSOVER SURR.
ON 0-7 ON ON ON ON 1V ON AUTO BYPASS English 35
Setup Audio Setup Selecting a Source Device And Connection Jack (Digital Audio In) Select the extemal devices you have connected to the receiver. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 'i"hlnJl'T' 1 !'l!!'"u! 2. Press the ENTER button to select INPUT. 3. Press the ENTER button to select INPUT SELECTION. 4. Press the .A T buttons to select a desired jack.
- To exit setup mode • Press the SETUP/MENU or EXIT button on the remote control. SETUP OFF appears on the display and Setup Mode is exited.
Setup Connection Setting For Surround Back Settings for the surround back speaker differ depending on the connection method and installation site of the speaker to be connected. You must configure the 7.1 CHANNEL settings according to the connected speaker before you listen to music properly. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the .A. T buttons to select SPEAKER, and then press the ENTER button. 3.
Setting the Speaker Listening Distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. CDCOI./CD _II Lllll.L.II. 2. Press the A T buttons to select SPEAKER, and then press the ENTER button. 3.
Setup Setting the Speaker Level You can set the balance and level of speakers. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the .AT buttons to select SPEAKER, and then press the ENTER button. 3. Press the .A T buttons to select SPK LEVEL, and then press the ENTER button. 4. Press the .A T buttons to select the speaker you want. • Each time you press this button, F.L-? F.R-? CEN-? S.L-? S.R -? SBL-? SBR -? S.
Setting the Test Tone Use the test tone to check the speaker connection status or level. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the A ,. buttons to select SPEAKER, and then press the ENTER button. 3. Press the A,. buttons to select TEST TONE, and then press the ENTER button. 4. Press the A ,. buttons to select the option you want, and then ,- n ,- ,-,; ,· r ,-, :::' r· c. n r'. c rr.
Setup Setting Dolby Pro Logic Mode This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound from 5.1 channel sources for music or movie mode. Press the PROLOGIC button on the remote control. • • • • • • MOVIE: Adds realism to the movie soundtrack. MUSIC : Provides up to 7.1 channel surround sound for digital, analog or existing stereo sources. GAME :Enhances the excitement of the game's sound. MATRIX : You will hear up to 7.1 channel surround sound.
Setting NE0:6 Mode You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the • ~buttons to select SURROUND, and then press the ENTER button. 3. Press the ~ T buttons to select DTS NE0:6, and then press the ENTER button. 4. Press the ENTER buttons to set the C-IMAGE mode you want. Press the ...
Setup Other Settings Audio Sync Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the .A T buttons to select OPTION, and then press the ENTER button. 3. Press the .AT buttons to select AUDIO SYNC, and then press the ENTER button.
MP3 Enhancer This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better sound from a low quality mp3 source. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. Ii_!,-.i•••'.-. .!., .l !_l hi T ,-. '• i 2. Press the • ~ buttons to select OPTION, and then press the ENTER button. 3. Press the • ~ buttons to select MP3 ENHANCER, and then press the ENTER button. 4.
Setup Auto Calibration Setup By setting the calibration just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment. -Before Setting1. Plug the ASC microphone into the ASC MIG jack. 2. Place the ASC microphone at the listening position. 3. Press the ASC button on the front panel, and then press the ENTER button. 1.
~NOTE Setting the calibration takes about 3 minutes. Because the volume level of the tone is fixed during the Auto Calibration Setup, you cannot adjust the volume using the volume control. If the ASC microphone is disconnected during the Auto Calibration Setup, the setup will be canceled. You can also press the ASC button on the remote control to use this function. If Dolby Pro Logic liz is set to ON, the selection are in the following sequence: FL 7 CEN 7 FR 7 SR 7 FHR 7 FHL 7 SL 7 SW.
Setup HDMI Setup Use this if you want to receive audio from HOM I connected external devices. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the • T buttons to select OPTION, and then press the ENTER button. 3. Press the • T buttons to select HDMI SETUP, and then press the ENTER button. 4. Press the • T buttons to set the HOM I Setup mode you want, and then press the ENTER button. 5.
en ([) ...... Video Convert Setup c:: "0 You can convert the incoming composite or component video signal into a maximum quality of the connected 1V if you output the converted video via HOM I OUT. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. leFT ICi'·,! 2. Press the • • buttons to select OPTION, and then press the ENTER button. 3. Press the • • buttons to select CONV. VIDEO, and then press the ENTER button.
Operation Using the Surround Modes Using the AUDIO EFFECT Button On the Front of the Main Unit Selecting the DPLIIx mode 1. Press the AUDIO EFFECT button to select DPLIIx mode. • Each time you press this button, PROLOGICII x -7 n:C:Ei -7 I!W=J.ill;J;I -7 3D SOUND will be selected in turn. 2. Press the <, > button. • Each time you press the<,> button, MUSIC -7 GAME -7 MATRIX -7 PL -7 PL OFF -7 MOVIE will be selected in turn. • If you turn Dolby Pro Logic liz on, HEIGHT -7 PL OFF will be selected in turn.
Using the S.DIRECT Button Output the original signal as it is without applying the sound field effect or any other sound effect. Press the S.DIRECT button. ~NOTE • The screen will display "DIRECT" instead of "S.DIRECT".
Operation ~NOTE m m Channel status displays are dependent on the speaker configuration. SFE mode works with 2-ch signals. If Dolby Pro Logic liz is set to On, the Surround Back speaker(SBUSBR) is changed to the Front Height Speaker(FHUFHR), Dolby true HD, Dolby plus, DTS-HD Audio ,SFE and NE0:6 will be output 5.1 channel. ProLogic llx and ProLogic liz works only audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. Using the SUBWOOFER button You can set the subwoofer Level. 1.
To Listen in Mono/Stereo Press the MOIST button on the remote control. • Each time you press this button, STEREO or MONO will be selected in turn. • If you select MONO in an area with weak reception, it will help to reduce noise. • This function works only with the remote control. Presetting Radio Stations You can preset up to 15 FM stations. E.g.: Setting station FM 89.1 0 in preset 2. 1. Press the IN PUT SELECT button on the remote control to select FM. 2.
Operation Using an iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPod audio function) You can play music files stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the dock. • Your iPod is automatically turned on. 3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode. 4. Press the PLAY button on the remote control to play.
8. Press the ._, ~ buttons to select the file to play and press the ENTER button. • The iPod·s video files will be played on the TV screen. 9. You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (1+11,~) buttons. • If you press the PREV button after the playback, the player will move to the start screen of the current file. • Press the STOP button to stop playing and return to the list screen. • Press the RETURN button to return to the previous menu.
Operation Mute Function This function is useful when answering a doorbell or telephone call. Press the MUTE button. • MUTE appears on the display. To output sound again MUTE Gil Press the MUTE button again or press the Volume button. • MUTE will disappear and sound will output. Adjust the Display You can adjust the brightness of the display. Press the DIMMER button. • Each time you press this button, the brightness changes as follows: Dark~ Bright.
Using Headphones Use headphones (not supplied) for private listening pleasure. Connect the headphones to the headphone (PHONES) jack and listen to music. ~NOTE Do not turn the volume up too high when you use headphones as it may damage your hearing. Software Upgrade Samsung may offer upgrades for AV Receiver's firmware in the future. Please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive.
Miscellaneous Operating your TV with the Remote Control 1. Press the POWER button to turn on the TV. 2. Press the TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. • If the code matches the TV·s code, the TV will be turned off. 5.
Operating your DVD or BD Player with the Remote Control 1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). • If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
Other Information Troubleshooting Before requesting service, please check the following. Remedy Symptom Check The unit will not tum on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced.
0 en 0r+ ;:r Symptom Check C1) ...., Remedy Can't select Dolby Pro Logic llx mode. • Is the input signal selected properly? • Only 2 channel signal can select Dolby Pro Logic llx mode. (ex: Dolby Digital, PCM, 2 channel analog input signal.) Can't select NE0:6 mode. • Is the input signal selected properly? • Use PCM and Analog input signal. There is no sound when playing a DTS encoded DVD.
Other Information Specifications Power supply 120V, 60Hz Standby power consumption 0.9W Power consumption GENERAL Main unit 75W Subwoofer 35W Weight 13.671bs Dimensions 0N x H x D) 16.9 x 6.5 x 14.2 inches Operating temperature rang.e FMTUNER AMPLIFIER FREQUENCY RESPONSE HDMI VIDEO OUTPUT * Operating humidity range 10%-75% Frequency response 87.5-1 08.0MHz Usable sensitivity 12dBf S/N ratio MONO/STE~EO Distortion MONO/STEREO 0.3/0.
SAMSUNG AV receiver LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAM SUNG customer care center. Area I • North America Canada Mexico U.S.A Contact Center If Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www .samsung. com/us Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-0511 Code No.
quick startguide . . . . . . . 1 Front panel 2 Remote control functions 3 Connecting the speakers 4 Connecting external devices AV Receiver System HW-0700/HW-07705 1 Front panel ! 2 3 4 5 .--------___r ~ T 7 6 8 9 10 11 12 T IAMIU11118 f - - - - _ _ _, I TT i 13 ·- I 1- ·---' 0 I • __________ c== ~ ~~--~ c; ~a ·a ((i) 0 0 0 •) 0 0 0 0 - 0 '0 1....-c:::===r----j-~ J - -::r-- - - -L-\ 0 --c:===r' CD INPUT SELECT CONTROL Used to select a source.
1_front panel (ill (lli RETURN BUTTON Return to the previous menu. AV SYNC BUTTON Used to select the Audio Delay Mode. (ill TUNING MODE BUTTON Used to select the Manual or Preset mode for FM radio. (W SELECT BUTTON Used to change the radio frequency. (ill (ill TUNER MEMORY BUTTON Used to set a preset radio frequency. S.DIRECT BUTTON Used to select the S.DIRECT mode. (Output the original signal as it is without applying the sound field effect or any other sound effect.
3 Connecting the speakers FRONT (L) ACTIVE SUBWOOFER Model HW·D700 AV Receiver HW·D700 Model HW·D770S AV Receiver FRONT SPEAKER CENTER SPEAKER SURROUND SPEAKER SURROUND BACK SPEAKER ACTIVE SUBWOOFER HW·D700 PS·FC770S PS-CC770S PS·RC770S PS-BC770S PS·AW730 * Speakers are provided with model HW-D770S only. Model HW-0700 does not come with speakers.
4 Connecting external devices Connecting External Devices/your TV via HOM I We recommend using HOM I connections for the best quality video and audio. Game console SAT (Cable/Satellite/ Set-top box) DVD or Blu-ray Player [ "] ~~TVTuner 0 (HDTV Terrestrial Receiver) c==J ~ • 6 Camcorder a • Using two HOM I OUT jacks, you can connect two lVs or projectors at the same time. t - • Connect it if you want to use Anynet+. (If connected TV support ARC, it is not necessary to connect the OPTICAL OLJT.
Connecting a DVD or BD{Biu-ray) Player VIDEO IN t" or t" Connecting_ a Cable, Sat~llite or-~et-:_top Box VIDEO IN TV 0 t or ~ NOTE • Disconnect the power plug from the outlet if you will not use this unit for a long period of time. • If the cable/set-top box has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
Connecting a CD Player - ~~ oo~o'to~ofoo QQQ.® o ~~~---J ~i !~~~rrrr I I I 1 I I I I I I I I I 1 I I 0 f' i :· .l-~ f' i f' or I 1 1 I I ,_& 1 - --~·- • I l: ooooooiO. I "'••o 0 i 1 COAXIAL OUT T c~;OJ CD Player ~ NOTE • If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connecting the FM Antenna 1. Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2.
Dear Valued Customers : Thank you for purchasing Samsung Products If you have any further questions, please contact Samsung Electronics America. Web : www.samsung.
READ THIS BEFORE USING YOUR SAMSUNG PRODUCTS! Valued Customer : If you experience any technical problems with your new Samsung Products ,please call Samsung Customer Support, (Monday - Sunday, 9:00 AM - 9:00PM) Before returning this product to your place of purchase.
