User manual

EnG

● functions

Insert a USB drive containing the rmware upgrade into the USB port on the back of the main unit.

Please be careful to not disconnect the power or remove the USB drive while upgrades are being

applied. The main unit will turn off automatically after completing the rmware upgrade.

When software is upgraded, settings you have made will return to their default (factory) settings. We

recommend you write down your settings so that you can easily reset them after the upgrade.

If the rnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.

For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported

le system.

Depending on the manufacturer, the USB may not be supported.

▪



Samsung may offer upgrades for the Crystal Surround Air Track's

system rmware in the future.

If an upgrade is offered, you can upgrade the rmware by

connecting a USB drive with the rmware upgrade stored on it to

the USB port on your Air Track.

Note that if there are multiple upgrade les, you must load them

onto the USB drive singly and use them to upgrade the rmware

one at a time.

Please visit Samsung.com or contact the Samsung call center to

receive more information about downloading upgrades les.

5V 500mA