HW-E6500 AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product.
Contents Safety Warnings Precautions GETTING STARTED 6 6 7 7 8 9 10 Key features of your new AV Receiver Accessories Description Front Panel Display Rear Panel Remote Control CONNECTIONS 13 14 15 16 17 18 19 19 20 Speaker Positioning Connecting the Speakers Connecting External Devices/your TV via HDMI HDMI Function Connecting to your TV Connecting a DVD or BD(Blu-ray) Player Connecting the FM Antenna Connecting AUX Components Connecting the USB SETUP 21 21 22 23 23 23 24 24 24 24 25 25 25 26 26 26 2
Contents OPERATION 28 MISCELLANEOUS 35 OTHER INFORMATION 37 • 28 28 28 28 29 29 29 29 29 30 30 31 31 31 32 32 32 32 33 34 Using the Sound Modes 3D SOUND DSP (Digital Signal Processor)/EQ Dolby Pro Logic II Mode Other Settings P.
Getting Started Key features of your new AV Receiver Product Features 3D SOUND You can enjoy more natural and vivid surround sound with enriched tones. Digital AV Receiver This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. Dolby Digital Effective audio encoding/decoding technology that provides a vivid surround sound in up to 5.1 channels.
01 Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 13 11 14 1 POWER BUTTON ( 2 INPUT SELECT CONTROL Used to select a source. USB FM DVD AUX TV 3 4 5 6 AUDIO ASSIGN CONTROL Toggles to select an input mode for the selected source. STOP/PLAY BUTTON Play, pause or stop playing the music in the USB connection. 3D SOUND BUTTON Press to apply 3D Sound effect. DISPLAY Displays the speaker/audio input status, listening mode, etc.
Getting Started Display 1 2 4 3 5 1 2 SPEAKER INDICATORS Displays sound producing speakers. SPEAKER LEVEL INDICATOR Displays the speaker level. 3 AUDIO INPUT INDICATORS Displays the audio input signal type of the currently connected external audio source. 4 MESSAGE DISPLAY Informs you of the status of the receiver. 5 RADIO FREQUENCY INDICATORS Displays the current radio frequency range.
01 Getting Started Rear Panel 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 SPEAKERS OUT TERMINALS Speaker connection terminals. ONLY FOR SERVICE JACK Used for the service repair. OPTICAL IN JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal. (BD/DVD, TV) COAXIAL IN JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal. (AUX) VIDEO OUT JACK Outputs the video signal to a monitors (TV, Projector etc).
Getting Started Remote Control Tour of the Remote Control 1 INPUT SELECT TV SOURCE POWER 20 21 2 3 4 AVR TV BD DVD 1 2 3 4 5 6 7 8 9 V SURROUND DSP/EQ 5 6 24 7 25 9 MUTE TUNING / CH VOL REPEAT 10 DISC MENU MENU TITLE MENU 12 TOOLS INFO 27 29 30 13 14 15 16 17 18 19 26 28 11 English 23 0 8 10 22 RETURN EXIT 31 32 33 34 A B C D DIMMER SLEEP TUNER MEMORY MO/ST 3D SOUND P.
01 POWER BUTTON Turns the receiver on/off. 2 TV BUTTON To change to TV mode, press the TV button. 3 AVR BUTTON To change to AVR(AV Receiver) mode, press the AVR button. 4 NUMBER BUTTONS Used to select a TV channel. DOLBY PRO LOGIC II BUTTON /V SURROUND BUTTON Select the desired Dolby Pro Logic II audio mode. Press Virtual Surround to select On/Off. 6 SKIP BUTTONS Press to skip backwards or forwards on a connected DVD/BD player.
Getting Started 27 REPEAT BUTTON Allows you to repeat a title, chapter, track or disc. 28 TITLE MENU BUTTON Use to enter the title menu. 29 INFO BUTTON Display information on the connected device currently being used. 30 ENTER BUTTON Used to select an item in the SETUP menu. 31 EXIT BUTTON Exits the SETUP menu. 32 TUNER MEMORY BUTTON Used to set a preset radio frequency. 33 MO/ST BUTTON Select MONO or STEREO for radio broadcasts.
02 Connections Speaker Positioning * Speakers are provided with model HW-E6500 only. Normal speaker's position : Simple speaker's position : 6.6~9.8 feet (2~3m) AV RECEIVER 6.6~9.8 feet (2~3m) AV RECEIVER SL SL SR SR Position of AV Receiver Place the AV Receiver on a dedicated stand or rack. Subwoofer g The position of the subwoofer is not so critical. Place it anywhere you like. Front Speakers Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Connections Connecting the Speakers Connecting Speaker Wire 1. Loosen the knob by turning counterclockwise. 2. Insert the bare part of the wire into the hole in the side of each terminal. 3. Tighten the knob by turning clockwise to secure the wire. Connecting the Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red d terminal (+), and then release the tab. 3.
02 HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI (High-Definition Multimedia Interface) interface, you can play back digital video and audio.
Connections HDMI Function Using Anynet+ (HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 15) 2. Set the Anynet+ function on your TV. (See the TV instructions manual for more information.
02 Connections Connecting to your TV or VIDEO IN OPTICAL OUT AUDIO OUT Video Connection Connect the Video cable (supplied) from the VIDEO OUT jack on the back of your AV Receiver to the Video Input jack on your TV. Audio Connection Connect the Digital Input (OPTICAL (TV)) on your AV Receiver to the Digital Output of the TV. OR Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.
Connections Connecting a DVD or BD(Blu-ray) Player VIDEO IN or OPTICAL OUT COAXIAL OUT or AUDIO OUT VIDEO OUT DVD or BD Player or Video Connection Connect a Video cable (supplied) from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player. Audio Connection Connect the Digital Input (OPTICAL (BD/DVD)) on your AV Receiver to the Digital Output of the DVD/BD player.
02 1. Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. FM antenna (supplied) ✎ NOTE Do not place the antenna cable close to the power cord. Keep it as far away as possible. If you experience poor FM reception, use an external antenna.
Connections Connecting the USB You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. In Stop mode, connect the USB storage device to the USB port on the front panel of the product. 2. Use the front USB PLAY ►, or STOP on the front panel to play, pause or stop playing the music.
03 Setup Setup For your convenience, you can set this AV receiver's features for the best use. Before Using the AV Receiver Turning On/Off Connect the power plug to the outlet. This unit will set to Standby mode. Press the POWER button on the main unit. • This unit will be turned on. • You can also turn the unit on/off by pressing the POWER button on the remote control. Remote Control Functions You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control.
Setup Selecting Digital/HDMI/Analog You can listen to sound of analog, HDMI, optical input using this unit. 1. Press the INPUT SELECT button on the remote control to select a desired function (DVD, AUX, TV). See page 10. 2. Press the AUDIO ASSIGN button on the remote control to select the audio input source of the external device you have connected. • Each time you press this button, the input mode changes as follows: A B C D DIMMER SLEEP TUNER MEMORY MO/ST 3D SOUND P.
03 Setup Setting the Setup menu The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version. 1 DISC MENU MENU TITLE MENU TOOLS INFO 3 2 RETURN A EXIT B C 1 MENU BUTTON : Display the home menu. 2 RETURN BUTTON : Return to the previous setup menu. 3 ENTER / DIRECTION BUTTON Move the cursor and select an item. Select the currently selected item. Confirm the setting.
Setup ✎ NOTE When using HDMI, the screen is automatically converted to the 16:9 Wide mode and TV Aspect is deactivated. If a file is in the 4:3 ratio, you cannot view it in the wide screen. Since file are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. BD Wise (Samsung products only) BD Wise is Samsung's latest inter-connectivity feature.
03 Setup Audio Simple Setup It is the Function for selecting the Speaker Layout suitable with the layout type of the connected Speaker. That is two path to select: 1. Settings AudioSimple Setup 2. Settings SystemInitial Setting Simple Speaker Setup • Normal Mode: Use this option when the surround speakers are located behind you. If Normal Mode is selected, you can only use Dolby Pro Logic II . • Simple Mode: Use this option if the surround speakers are located in front of you.
Setup Setting up the Speaker Delay Time Settings Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers.
03 Settings Setup User EQ User EQ You can configure the equalizer settings manually to your preference. dB 6 · · · · · · · · · · · · -6 250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz a Reset > Adjust < Move ' Return Audio Return Ch. mMove " Select ' Return You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable. • Off : Turn the Audio Return Channel function off.
Operation Using the Sound Modes 3D SOUND Press the 3D SOUND button. • Each time you press this button, 3D SOUND ON 3D SOUND OFF will be selected in turn. • You can also select the 3D SOUND mode by pressing the 3D SOUND button on the remote control. ✎ NOTE The 3D sound effect will not be available for FM. The 3D sound effect will not be available for simple mode when simple setup is set. DSP (Digital Signal Processor)/EQ Press the DSP/EQ button.
04 Operation Other Settings P.BASS Press the P.BASS button on the remote control. Each time you press this button, P.BASS ON P.BASS OFF will be selected in turn. ✎ NOTE The P.BASS function provides a bass boost to reinforce the low frequencies. The P.BASS function is only available with 2 channel LPCM sources such as MP3, DivX, CD and WMA. The P.BASS function does not work with Dolby Pro Logic ll modes. If you press P.
Operation JPEG File Playback Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a USB and then played back with this product. 1. Connect the USB storage device to the USB port on the front panel of the product. ROOT JPEG 1 JPEG 2 2. Press the ◄► buttons to select Photos, and then press the ENTER button. 3. Press the ▲▼ buttons to select the folder you want to play, and then press the ENTER button. 4.
04 Operation Listening to the Radio You can listen to the radio by using either automatic or manual tuning. 1. Press the INPUT SELECT button on the remote control to select FM. 2. If you want to switch the tuning mode between Preset and Manual, use the TUNING MODE button in the front panel, or the STOP button on the remote control. • Each time you press this button, PRESET MANUAL 3. Select a frequency (radio broadcast). • Preset tuning : Use the TUNING dial on the front panel or press the TUNING/CH ( .
Operation Convenient Functions Sleep Timer Function You can set the time that this unit will shut itself off. Press the SLEEP button. • SLEEP : OFF SLP 10 SLP 20 SLP 30 SLP 60 SLP 90 SLP 120 SLP 150 will be selected in turn. To check sleep timer A B C D DIMMER SLEEP TUNER MEMORY MO/ST 3D SOUND P.BASS S/W LEVEL AUDIO ASSIGN AH59-02382A Press the SLEEP button. • The remaining time before this unit will shut itself off is shown on the display.
04 Operation Reset Function When the Power is on, No USB In "No USB" mode, press and hold the STOP button to reset the system. • INIT appears on the display. • The unit will turn off after 5 seconds. ✎ NOTE Using the RESET function will erase all stored settings. Do not use this unless necessary. The product will automatically turn off from no USB and Settings Function USB Stop mode for more than 25 minutes.
Operation Software Upgrade Samsung may offer upgrades for AV Receiver's firmware in the future. Please visit Samsung.com or contact the Samsung call center at to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your AV Receiver. 1. Insert a USB drive containing the firmware upgrade into the USB port on the front of the main unit. 2. Select a folder that contains the upgradeable firmware files.
05 Miscellaneous Press the POWER button to turn on the TV. Press the TV button to set the remote to TV mode. Point the remote control toward the TV. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. • If the code matches the TV's code, the TV will be turned off. 5.
Miscellaneous Operating your DVD or BD Player with the Remote Control 1. Press the POWER button to turn on the DVD (BD) player. 2. Press the DVD/BD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). • If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
06 Other Information Other Information Troubleshooting Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced.
Other Information Product Protection Function Heat protection • The protection function will come on if the main unit or power transformer overheats. " will appear in the display . " This function will come on : - If speaker terminal is shorted - If speaker cable is shorted If there is no problem when you turn the unit on again after turning it off, PROTECT mark will disappear on the display and the unit will work properly.
06 Other Information Specifications GENERALZ FM TUNER AMPLIFIER FREQUENCY RESPONSE HDMI VIDEO OUTPUT Weight 5.4 Kg Dimensions (W x H x D) 429.2 x 165.1 x 360 mm Operating temperature range +5°C~+35°C Operating humidity range 10%~75% Frequency response 87.5~108.0MHz Usable sensitivity 12dBf S/N ratio MONO/STEREO 60dB/60dB Distortion MONO/STEREO 0.3/0.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Canada Mexico U.S.A Contact Center Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Code No.
HW-E6500 Sistema do receptor de AV manual do usuário Imagine as possibilidades Obrigado por adquirir este produto Samsung. Para receber um atendimento mais completo, registre seu produto no site www.samsung.
Informações de segurança Avisos de segurança PARA REDUZIR O RISCO DE CHOQUE ELÉTRICO, NÃO RETIRE A TAMPA (NEM A PARTE TRASEIRA). NO INTERIOR DO APARELHO, NÃO EXISTEM PEÇAS QUE POSSAM SER REPARADAS PELO USUÁRIO. CONSULTE A EQUIPE DE ASSISTÊNCIA TÉCNICA QUALIFICADA PARA ESSE TIPO DE SERVIÇO. CUIDADO RISCO DE CHOQUE ELÉTRICO NÃO ABRA Este símbolo indica que há “tensão perigosa” dentro do produto, podendo causar riscos de choque elétrico ou ferimentos pessoais.
Precauções • Certifique-se de que a fonte de alimentação CA em sua casa está em conformidade com o adesivo de identificação localizado atrás do seu produto. • Instale o produto horizontalmente, em uma base apropriada (mobília), com espaço suficiente ao redor para ventilação (7,5 a 10 cm). • Não coloque o produto em amplificadores ou em outros equipamentos que possam se esquentar. Certifique-se de que os slots de ventilação não estão cobertos. • Não empilhe nada em cima do produto.
Índice 2 3 Avisos de segurança Precauções PRIMEIROS PASSOS 6 6 7 7 8 9 10 Principais recursos do seu novo Receptor de AV Acessórios Descrição Painel frontal Visor Painel traseiro Controle remoto CONEXÕES 13 14 15 16 17 18 19 19 20 Posicionamento dos alto-falantes Conectando os alto-falantes Conectando dispositivos externos/sua TV via HDMI Função HDMI Conectando à TV Conectando um leitor de DVD ou BD (Blu-ray) Conectando a antena FM Conectando componentes AUX Conectando o USB CONFIGURAÇÃO 21 21 22 2
Índice OPERAÇÃO 28 OUTROS 35 OUTRAS INFORMAÇÕES 37 28 28 28 28 29 29 29 29 29 30 30 31 31 31 32 32 32 32 33 34 Usando os modos de Som SOM 3D DSP (Processador de sinal digital)/EQ Modo Dolby Pro Logic II Outras configurações P.
Primeiros passos Principais recursos do seu novo Receptor de AV Recursos do produto SOM 3D Você pode apreciar um som mais natural e nítido com tons enriquecidos. Receptor de AV digital Este produto é um receptor de AV digital puro que executa o processamento do sinal digital para minimizar a distorção e a perda do sinal. Dolby Digital Tecnologia de codificação/decodificação de áudio efetiva que fornece um som surround nítido com até 5.1 canais.
01 Primeiros passos Descrição Painel frontal 1 2 3 4 5 6 7 8 9 10 13 1 11 12 14 BOTÃO LIGA/DESLIGA ( ) CONTROLE DE SELEÇÃO DE ENTRADA CONTROLE DE ATRIBUIÇÃO DE ÁUDIO Liga e desliga o receptor. BOTÃO PARAR/REPRODUZIR Reproduza, pause ou pare de reproduzir a música na conexão USB. BOTÃO DE SOM 3D Pressione para aplicar o efeito de Som 3D. VISOR Exibe o status de entrada de alto-falante/áudio, modo de audição, etc 7 8 9 10 11 12 BOTÃO DSP/EQ Selecione o modo de áudio DSP/EQ desejado.
Primeiros passos Visor 1 2 4 1 2 3 INDICADORES DO ALTO-FALANTE INDICADOR DO NÍVEL DO ALTO-FALANTE INDICADORES DE ENTRADA DE ÁUDIO Exibe o nível do alto-falante. Exibe o tipo de sinal de entrada de áudio da fonte de áudio externa atualmente conectada. VISOR DE MENSAGENS Informa o status do receptor. 5 INDICADORES DE FREQUÊNCIA DE RÁDIO Exibe a atual faixa de frequência de rádio. Português 5 Exibe os alto-falantes de produção de som.
01 Primeiros passos Painel traseiro 1 2 3 4 5 6 7 8 9 10 1 TERMINAIS DE SAÍDA DO ALTO-FALANTE Terminais de conexão do alto-falante. 2 CONECTORES APENAS PARA ASSISTÊNCIA Utilizado para serviço de assistência. 3 CONECTORES DE ENTRADA ÓPTICA (ENTRADA DE ÁUDIO DIGITAL) Recebe o sinal de áudio óptico digital. (BD/DVD, TV) 4 CONECTOR DE ENTRADA COAXIAL (ENTRADA DE ÁUDIO DIGITAL) Recebe o sinal de áudio coaxial digital.
Primeiros passos Controle remoto Tour pelo controle remoto 1 INPUT SELECT TV SOURCE POWER 20 21 2 3 4 AVR TV BD DVD 1 2 3 4 5 6 7 8 9 V SURROUND DSP/EQ 5 24 7 25 8 MUTE TUNING / CH VOL REPEAT 10 DISC MENU MENU TITLE MENU TOOLS INFO 10 Português 27 29 30 13 14 15 16 17 18 19 26 28 11 12 23 0 6 9 22 RETURN EXIT 31 32 33 34 A B C D DIMMER SLEEP TUNER MEMORY MO/ST 3D SOUND P.
01 BOTÃO LIGA/DESLIGA Liga e desliga o receptor. 2 BOTÃO TV Para alterar para o modo TV, pressione o botão TV. 3 BOTÃO AVR Para alterar para o modo AVR (Receptor de AV), pressione o botão AVR. 4 BOTÕES DE NÚMERO Usados para selecionar um canal de TV. BOTÃO DOLBY PRO LOGIC II / BOTÃO V-SURROUND Selecione o modo de áudio Dolby Pro Logic II desejado. Prima Virtual Surround (Surround Virtual) para seleccionar On/Off (Ligar/Desligar).
Primeiros passos 27 BOTÃO DE REPETIÇÃO Permite repetir um título, capítulo, trilha ou disco. 28 BOTÃO MENU DO TÍTULO Use para entrar no menu do título. 29 BOTÃO INFO Exiba as informações no dispositivo conectado atualmente sendo usado. 30 BOTÃO ENTER Usado para selecionar um item no menu SETUP (CONFIGURAÇÃO). 31 BOTÃO EXIT Sai do menu SETUP (CONFIGURAÇÃO). 32 BOTÃO DA MEMÓRIA DO SINTONIZADOR Usado para configurar uma frequência de rádio programada.
02 Conexões Posicionamento dos alto-falantes * Os alto-falantes são fornecidos apenas com o modelo HW-E6500. Posição normal das colunas : Posição simples das colunas : 6.6~9.8 feet (2~3m) 6.6~9.8 feet (2~3m) SL SL SR SR Posição do receptor de AV Coloque o receptor de AV em uma base ou rack dedicado. Subwoofer g A posição do subwoofer não é muito importante. Coloque-o onde desejar.
Conexões Conectando os alto-falantes Conectando o fio do alto-falante 1. Solte o botão virando em sentido anti-horário. 2. Insira a parte desencapada do fio no orifício na lateral de cada terminal. 3. Aperte o botão girando em sentido horário para prender o fio. Conectando os alto-falantes 1. Pressione a guia do terminal atrás do alto-falante. 2. Insira o fio preto no terminal preto (–) e o fio vermelho no terminal vermelho o (+), em seguida, solte a guia. 3.
02 HDMI é uma interface digital padrão para conexão a dispositivos como uma TV, projetor, leitor de DVD, leitor Blu-ray, decodificador Set-top box e muito mais. O HDMI remove qualquer perda de sinal a partir da conversão analógica, permitindo apreciar a qualidade do vídeo e do som de áudio porque ela foi criada originalmente na fonte digital. Ao conectar-se através da interface HDMI (High-Definition Multimedia Interface), é possível reproduzir áudio e vídeo digital.
Conexões Função HDMI Usando Anynet+(HDMI-CEC) Anynet+ é uma função que permite controlar outros dispositivos Samsung com o controle remoto de sua TV Samsung. Anynet + pode ser usada conectando este receptor de AV a uma TV SAMSUNG com um cabo HDMI. Disponível somente com TVs SAMSUNG e produtos de AV SAMSUNG que suportam Anynet+. 1. Conecte o produto a uma TV Samsung com um cabo HDMI. (Consulte a página 15). 2. Configure a função Anynet+ em sua TV.
02 Conexões Conectando à TV OU VIDEO IN OPTICAL OUT AUDIO OUT Conexão de vídeo Conecte o cabo de vídeo (fornecido) do conector de SAÍDA DE VÍDEO atrás do receptor de AV no conector de entrada de vídeo em sua TV. Conexão de áudio Conecte a entrada digital ((TV) ÓTICA) no receptor de AV à saída digital da TV. OU Conecte a entrada de áudio (AUDIO IN - TV) no receptor de AV à saída de áudio da TV.
Conexões Conectando um leitor de DVD ou BD (Blu-ray) VIDEO IN ou OPTICAL OUT COAXIAL OUT ou AUDIO OUT VIDEO OUT Leitor de DVD ou BD ou Conexão de vídeo Conecte um cabo de vídeo (fornecido) do conector de entrada de vídeo (VIDEO IN - BD/DVD) atrás do receptor de AV ao conector de saída de vídeo no leitor de DVD/BD. Conexão de áudio Conecte a entrada digital ((BD/DVD) ÓTICO) no receptor de AV à saída digital do leitor de DVD/BD.
02 Conexões Conectando a antena FM 1. Conecte a antena FM fornecida ao terminal FM ANTENNA como uma medida temporária. 2. Gire lentamente o fio da antena até encontrar um local onde a recepção seja boa e, em seguida, fixe-o em uma parede ou outra superfície rígida. Antena FM (fornecida) ✎ NOTA Não coloque o cabo da antena perto do cabo de alimentação. Mantenha-o o mais longe possível. Se você perceber uma recepção de FM ruim, use uma antena externa.
Conexões Conectando o USB Você pode usar a conexão USB para reproduzir arquivos multimídia (MP3, JPEG, DivX, etc) baixados do dispositivo de armazenamento USB. 1. No modo Parar, conecte o dispositivo de armazenamento USB à porta USB no painel frontal do produto. 2. Use o botão PLAY ►, ou STOP do USB frontal no painel frontal para reproduzir, pausar ou parar de reproduzir a música.
03 Configuração Antes de usar o receptor de AV Ligando e desligando Conecte o plugue de alimentação à tomada. Esta unidade será configurada para o modo em espera. Pressione o botão de POWER na unidade principal. • Esta unidade sera ligada. • Você também pode ligar ou desligar a unidade, pressionando o botão POWER no controle remoto. Funções do controle remoto Você pode operar o seu AMP (este receptor de AV) / TV e BD (Samsung apenas) / leitor de DVD com este controle remoto.
Configuração Selecionando Digital/HDMI/Analógico Você pode escutar o som da entrada analógica, HDMI, ótica usando esta unidade. 1. Pressione o botão de INPUT SELECT no controle remoto para selecionar uma função desejada (DVD, AUX, TV). Consulte a página 10. 2. Pressione o botão de AUDIO ASSIGN no controle remoto para selecionar a fonte de entrada de áudio do dispositivo externo que você conectou.
03 Dependendo do menu selecionado, a etapa de acesso pode ser diferente. A GUI (Interface gráfica do usuário) neste manual pode diferir, dependendo da versão do firmware. 1 DISC MENU MENU TITLE MENU TOOLS RETURN A BOTÃO MENU: Exibe o menu inicial. 2 BOTÃO RETURN: Retorna ao menu de configuração anterioar. 3 BOTÃO ENTER / DIRECTION: Move cursor e seleciona um item. Seleciona o item em destaque. Confirma a configuração. 4 BOTÃO EXIT: sai do menu de configuração.
Configuração ✎ NOTA Ao usar HDMI, a tela é automaticamente convertida no modo 16:9 panorâm. e o aspecto da TV é desativado. Se um arquivo estiver na proporção 4:3, você não conseguirá visualizá-lo em widescreen. Uma vez que os arquivos são gravados em vários formatos de imagem, eles aparecerão diferentes dependendo do software, do tipo de TV e da proporção de aspecto da TV. BD Wise (Produtos Samsung apenas) BD Wise é o mais recente recurso de interconectividade da Samsung.
03 Configuração Áudio Config. Simples Corresponde à função utilizada para seleccionar a disposição das colunas adequadas ao tipo de disposição da coluna ligada. Existem dois caminhos para efectuar a selecção: 1. Definições ÁudioConfiguração simples 2. Definições SistemaDefinição inicial Simples Configuração do alto-falante • Modo normal: Utilize esta opção quando as colunas surround estiverem localizadas atrás de si.
Configuração Configurando o tempo de atraso do alto-falante Settings Quando o som Surround de 5.1CH for reproduzido, você poderá apreciar o melhor som se a distância entre você e cada alto-falante for a mesma. Uma vez que o som chega na posição de audição em diferentes tempos, dependendo do posicionamento dos alto-falantes, você pode ajustar essa diferença adicionando um efeito de atraso ao som dos alto-falantes central e traseiro.
03 Configuração Utilizador EQ Settings User EQ Pode definir as configurações do equalizador manualmente, de acordo com as suas preferências. dB 6 · · · · · · · · · · · · -6 250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz a Reset > Adjust < Move ' Return mMove Canal de Retorno de Áudio " Select ' Return Pode usufruir do som do televisor pelas colunas do Sistema de cinema em casa, utilizando apenas um cabo HDMI. • Desl. : Desactiva a função de canal de retorno de áudio.
Operação Usando os modos de Som SOM 3D Pressione o botão de 3D SOUND. • Sempre que você pressionar o botão, 3D SOUND ON 3D SOUND OFF será selecionado também. • Também é possível selecionar o modo 3D SOUND pressionando o botão de 3D SOUND no controle remoto. ✎ NOTA O efeito sonoro 3D não ficará disponível para FM. O efeito sonoro de 3D não estará disponível no modo simples quando está definida a configuração simples. DSP (Processador de sinal digital)/EQ Pressione o botão de DSP/EQ.
04 Operação Outras configurações P.BASS Pressione o botão P.BASS no controle remoto. • Sempre que pressionar este botão, P.BASS ON P.BASS OFF será selecionado também. ✎ NOTA A função P.BASS fornece uma intensidade grave para reforçar as baixas frequências. A função P.BASS está disponível apenas com fontes LPCM de 2 canais como MP3, DivX, CD e WMA. A função P.BASS não pode ser usada com os modos Dolby Pro Logic ll. Se você pressionar P.
Operação Reprodução de arquivo JPEG As imagens capturadas com uma câmera digital ou filmadora, ou os arquivos JPEG em um PC podem ser armazenados em um USB e depois reproduzidos com este produto. 1. Conecte o dispositivo de armazenamento USB à porta ROOT USB no painel frontal do produto. JPEG 1 JPEG 2 2. Pressione os botões ◄► para selecionar Foto e, em JPEG 3 seguida, pressione o botão ENTER. 3.
04 Operação Ouvindo o rádio Você pode ouvir o rádio usando a sintonia automática ou manual. 1. Pressione o botão de INPUT SELECT do controle remoto para selecionar FM. 2. Se desejar alternar o modo de ajuste entre Pré-aj e Manual, use o botão TUNING MODE no painel frontal ou o botão STOP no controle remoto. • Sempre que pressionar este botão, PRESET MANUAL 3. Selecione uma frequência (transmissão de rádio).
Operação Funções convenientes Função de temporizador para dormir Você pode configurar o tempo em que esta unidade será desligada sozinha. Pressione o botão SLEEP. • SLEEP : OFF SLP 10 SLP 20 SLP 30 SLP 60 SLP 90 SLP 120 SLP 150 será selecionado também. Para verificar o temporizador para dormir A B C D DIMMER SLEEP TUNER MEMORY MO/ST 3D SOUND P.BASS S/W LEVEL AUDIO ASSIGN AH59-02382A Pressione o botão SLEEP.
04 Operação Função Redefinir Quando o aparelho estiver ligado, No USB No mo "No USB", mantenha pressionado o botão STOP para redefinir o sistema. • INIT é exibido no visor. • A unidade será desligada após 5 segundos. ✎ NOTA Usar a função REDEFINIR apagará todas as Settings Function USB configurações armazenadas. Não faça isso, a não ser que seja necessário. O produto desliga-se automaticamente, se os modos USB e Parar estiverem activados durante mais de 25 minutos.
Operação Atualização do software A Samsung pode oferecer atualizações para o firmware do receptor de AV no futuro. Visite Samsung.com ou entre em contato com a central de atendimento da Samsung para receber informações sobre como baixar atualizações e usar uma unidade USB. As atualizações serão possíveis ao conectar uma unidade USB à porta USB localizada no receptor de AV. 1. Insira uma unidade USB contendo a atualização do firmware na porta USB na parte frontal da unidade principal. 2.
05 Outros Outros Operando a TV com o controle remoto Pressione o botão POWER para ligar a TV. Pressione o botão TV para configurar o controle remoto para o modo TV. Aponte o controle remoto em direção à TV. Enquanto mantém pressionado o botão POWER, insira o código correspondente à marca da TV. • Se houver mais de um código listado para a sua TV na tabela, insira um por vez para determinar o código que funciona. • Se o código corresponder ao código da TV, ela será desligada. 5.
Outros Operando o leitor de DVD ou BD com o controle remoto 1. Pressione o botão POWER para ligar o leitor de DVD (BD). 2. Pressione o botão DVD/BD no controle remoto para configurar o modo DVD (BD). 3. Aponte o controle remoto em direção ao DVD (BD). 4. Enquanto mantém pressionado o botão POWER, insira o código correspondente à marca do DVD (BD). • Se houver mais de um código listado para o seu DVD (BD) na tabela, insira um por vez para determinar o código que funciona.
06 Outras informações Outras informações Solução de problemas Antes de solicitar manutenção, verifique o seguinte. Sintoma Verificar Solução A unidade não liga. • O cabo de alimentação está conectado à tomada? • Conecte o plugue de alimentação à tomada. Uma função não é aplicada quando o botão é pressionado. • Há eletricidade estática no ar? • Desconecte o plugue de alimentação e volte a conectá-lo. O som não é reproduzido.
Outras informações Função de proteção do produto Proteção contra aquecimento • A função de proteção aparecerá se houver superaquecimento na unidade principal ou no transformador de energia. " " aparecerá no visor. Esta função aparecerá: - Se o terminal do alto-falante entrar em curto-circuito - Se o cabo do alto-falante entrar em curto-circuito Se não houver problema ao ligar a unidade novamente após desligá-la, a marca PROTECT desaparecerá do visor e a unidade funcionará corretamente.
06 Outras informações Especificações GERAL Peso 5.4 Kg Dimensões (W x H x D) 429.2 x 165.1 x 360 mm Faixa de temperatura de operação +5°C~+35°C Faixa de umidade de operação 10% a 75% Resposta de frequência 87.5~108.
Contacte SAMSUNG GLOBAL Se tem algumas dúvidas ou comentários sobre os produtos Samsung, contacte por favor a nossa linha de apoio a clientes Samsung. Area ` North America Canada Mexico U.S.A Contact Center Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Code No.