HW-J370 Wireless Subwoofer (PS-WJ470) Wireless Receiver Module (SWA-7000S) User manual Wireless Audio - Soundbar Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HW-J370-ZC_ENG_0319.
GETTING STARTED GETTING STARTED FEATURES Samsung Remote App LICENSES Hold the control of your Soundbar in the palm of your hand with an Android smart device and the Samsung Audio Remote app. This convenient app lets you control all the Soundbar's basic functions such as power, volume, and the media controls, as well as custom functions such as the equalizer setting. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
GETTING STARTED SAFETY INFORMATION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENG SAFETY WARNINGS The lighting flash and arrowhead within the triangle indicates that there is dangerous voltage Inside the product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. The explanation point within the triangle indicates that there are important instructions accompanying the product.
GETTING STARTED PRECAUTIONS 2.7 inch 3.9 inch 3.9 inch 3.9 inch Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot.
GETTING STARTED CONTENTS ENG 2 GETTING STARTED 22 FUNCTIONS 2 Features 22 Input Mode 3 Safety Information 23 Bluetooth 6 What’s Included 26 Software Update 7 DESCRIPTIONS 27 TROUBLESHOOTING 7 Top / Front Panel 27 8 Rear / Bottom Panel 9 Remote Control Troubleshooting 28 APPENDIX 28 Specifications 11 INSTALLATION 11 Installing the Wall Mount 11 Installation Precautions 12 Installing the Bracket without Referring to the Wall-Mount Installation Guide 13 Detaching the Wall M
GETTING STARTED WHAT’S INCLUDED BEFORE READING THE USER’S MANUAL Note the following terms before reading the user manual. + Icons used in this manual Icon Term Caution Note Definition Indicates a situation where a function does not operate or settings may be canceled. Indicates tips or instructions on the page that help you operate a function. Check for the supplied accessories shown below.
DESCRIPTIONS DESCRIPTIONS TOP / FRONT PANEL Controls the volume level. The numeric value of the volume level appears in the front panel display. ENG VOL. - / + (Power) Button Turns the power on and off. (Source) Button Display Selects the D.IN, AUX, BT, TV, or USB input. Displays the current mode. ● While the unit is powered on, (Source) button pressing the for more than 3 seconds sets the (Mute) button to act as the (Mute) button.
DESCRIPTIONS REAR / BOTTOM PANEL AUX IN AUX IN (USB Port) Connect USB devices here to play files on the devices. Connect to the Analog output of an external device. OPTICAL IN LABEL DC 24V (Power Supply In) Connect the DC power adaptor to the power supply jack, and then connect the AC power adaptor plug to a wall outlet. OPTICAL IN (D.IN) Connect to the digital (optical) output of an external device. ● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
DESCRIPTIONS REMOTE CONTROL ENG SOURCE Press to select a source connected to the Soundbar. Mute You can turn the volume down to 0 with the push of a button. Press again to restore the sound to the previous volume level. Repeat Press to set the Repeat function during music playback from a USB device. OFF - REPEAT : Cancels Repeat Playback. TRACK - REPEAT : Repeatedly play a track. ALL - REPEAT : Repeatedly play all tracks. RANDOM - REPEAT : Plays tracks in random order.
DESCRIPTIONS Power Turns the Soundbar on and off. Volume Adjusts the volume level of the unit. Play / Pause Press the & button to pause a file temporarily. Press the & button again to play the selected file. Skip Back If there is more than one file on the device you are playing, and you press the # button, the previous file is selected. SURR. LEVEL Press the SURR. LEVEL button. Then, use the #,$ buttons to adjust the Surround Speaker volume from -6 to +6. SURR. MODE Press the SURR.
INSTALLATION INSTALLATION INSTALLING THE WALL MOUNT ENG You can use the wall mount bracket to mount this unit on a wall. INSTALLATION PRECAUTIONS ● Install on a vertical wall only. ● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set. ● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.
INSTALLATION 3. Fasten the wall mounts and screws to the marked locations. • The left and right mounts are different shapes. Make sure to position them correctly. Wall Mounting the Sound Bar 4. Secure the two holder screws to the screw holes on the back of the Soundbar's main body, one on the left and one on the right. ● Insert the USB cable into the back of the Soundbar before installing it on the wall. 5. Set the holder screws on the back of the Soundbar into the grooves of the wall mounts.
INSTALLATION 1. Place Wall Mount L on the desired wall surface parallel to the floor as shown on the previous page. Mark the location of the screw holes on the wall. Drill holes for the screws at the places you have marked. 3. Place Wall Mount R on the desired wall surface parallel to the floor and aligned with Wall Mount L as shown on the previous page. Mark the location of the screw holes on the wall. Drill holes for the screws at the places you have marked. ENG 2.
CONNECTIONS CONNECTIONS ● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. ● Before moving or installing this product, be sure to turn off the power and disconnect the power cord. CONNECTING THE SUBWOOFER AND SWA-7000S TO THE MAIN UNIT CONNECTING THE SUBWOOFER AND SWA-7000S AUTOMATICALLY The linking IDs of the SWA-7000S wireless module and the subwoofer are preset at the factory.
CONNECTIONS ENG ● Before moving or installing the product, be sure to turn off the power and disconnect the power cord. ● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds. ● If you use a device that uses the same frequency (2.4GHz/5.0GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.
CONNECTIONS CONNECTING TO A TV CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE Optical Cable OPTICAL OUT OPTICAL IN 1. Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable. (Source) button on the top panel of the Soundbar or the SOURCE button on the remote control to 2. Press the select the D.IN mode.
CONNECTIONS TV SOUNDCONNECT ENG You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV SoundConnect function. Connect 1. Turn on the TV and Soundbar. • Turn on the menu of the TV. • Move to Speaker Settings on "Sound" tab. • Set the "Add New Device" menu to "On". 2. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the TV mode. 3.
CONNECTIONS + Using the Bluetooth POWER On function The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on or off will turn the Soundbar's power on and off as well. 1. Connect the TV to your Soundbar using the TV SoundConnect function. 2. Press the Bluetooth POWER button on the Soundbar remote.
CONNECTIONS ENG CONNECTIONS WITH EXTERNAL DEVICES This unit comes equipped with one optical in digital jack and one audio analog in jack, giving you two ways to connect it to an External Devices. Optical Cable OPTICAL IN OPTICAL OUT BD / DVD player / Set-top box / Game console Audio Cable (not supplied) AUX OUT AUX IN AUX CABLE 1. Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device. 2.
CONNECTIONS USB You can play music files located on USB storage devices through the Soundbar. Display USB port 1. Connect the USB device to the USB port on the back of the product. 2. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the USB mode. 3. USB appears on the display screen. • The Soundbar connection to the USB device is complete.
CONNECTIONS ● File Format Type Compatibility list: Extension Sampling Rate Bitrate MPEG 1 Layer2 16KHz ~ 48KHz 80kbps~320kbps MPEG 1 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2.5 Layer3 16KHz ~ 48KHz 80kbps~320kbps Wave_Format_MSAudio1 16KHz ~ 48KHz 56kbps~128kbps Wave_Format_MSAudio2 16KHz ~ 48KHz 56kbps~128kbps AAC 16KHz ~ 96KHz ENG Codec *.mp3 *.wma 48kbps~320kbps 128kbps~192kbps AAC-LC 16KHz ~ 96KHz *.aac 5.
FUNCTIONS FUNCTIONS INPUT MODE Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the mode you want. Input mode Display Optical Digital input D.IN AUX input AUX BLUETOOTH mode BT TV SoundConnect TV USB mode USB The unit turns off automatically in the following situations. ● D.IN / BT / TV / USB Mode - If there is no audio signal for 25 minutes. ● AUX Mode - If the AUX cable is disconnected for 25 minutes.
FUNCTIONS BLUETOOTH TO CONNECT THE SOUNDBAR TO A BLUETOOTH DEVICE ENG You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires! Check if the Bluetooth device supports the Bluetooth compliant stereo headset function. Connect Bluetooth device 1. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the BT mode. • You will see BT READY on the front display of the Soundbar. 2.
FUNCTIONS ● ● ● ● ● ● ● ● ● ● ● ● If asked for a PIN code when connecting a Bluetooth device, enter <0000>. Only one Bluetooth device can be paired at a time. The Bluetooth connection will be terminated when you turn the Soundbar off. The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: - If there is a strong electrical field around the Soundbar. - If several Bluetooth devices are simultaneously paired with the Soundbar.
FUNCTIONS + More About Bluetooth ENG ● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft. ● The Soundbar automatically turns off after 25 minutes in the Ready state. Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection.
FUNCTIONS SOFTWARE UPDATE Samsung may offer updates for the Soundbar's system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the firmware one file at a time. Please visit samsung.
TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING ENG Before requesting service, please check the following. The unit will not turn on. • Is the power cord plugged into the outlet? Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? Disconnect the power plug and connect it again. Sound is not produced. • Is the Mute function on? Press the • Is the volume set to minimum? Adjust the Volume.
APPENDIX APPENDIX SPECIFICATIONS Model name HW-J370 USB Weight GENERAL Dimensions (W x H x D) 5V / 0.5A Main Unit 3.45 lbs Subwoofer (PS-WJ470) 10.12 lbs Surround Speaker 0.68 lbs Rear (Surround) AMP (SWA-7000S) 1.63 lbs Main Unit 37.1 x 2.3 x 2.6 inches Subwoofer (PS-WJ470) 7.1 x 14.2 x 11.8 inches Surround Speaker 3.7 x 4.6 x 2.9 inches Rear (Surround) AMP (SWA-7000S) 2.0 x 7.9 x 5.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specifi ed warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
© 2015 Samsung Electronics Co., Ltd. All rights reserved. HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contact Center Area Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) HW-J370-ZC_ENG_0319.
HW-J370 Caisson des basses sans fil (PS-WJ470) Module récepteur sans fil (SWA-7000S) Manuel d'utilisation Wireless Audio - Soundbar Imaginez les possibilités Merci d’avoir choisi un appareil Samsung. Pour recevoir une assistance plus complète, veuillez enregistrer votre produit sur www.samsung.com/register HW-J370_ZC_FRC_0319.
DÉMARRAGE démarrage CARACTÉRISTIQUES Application Samsung Remote Contrôlez votre Soundbar depuis la paume de votre main à l’aide de l’application Samsung Audio Remote.* Cette application pratique est un poste de contrôle pour les commandes de base comme l’alimentation, le volume et les commandes médias de même que des réglages personnalisés comme ceux de l’égaliseur. LICENCE Fabriqué sous licence concédée par Dolby Laboratories.
DÉMARRAGE INFORMATIONS RELATIVES À LA SÉCURITÉ POUR ÉVITER LES RISQUES DE CHOC ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT. L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR. S’ADRESSER À UN SERVICE APRÈS-VENTE QUALIFIÉ. FRA AVERTISSEMENTS L’éclair et la flèche dans le triangle indiquent la présente d’une tension dangereuse à l’intérieur du produit.
DÉMARRAGE PRÉCAUTIONS 2.7 inch 3.9 inch 3.9 inch 3.9 inch Assurez-vous que l'alimentation c.a. de votre domicile satisfait aux normes inscrites sur l'étiquette d'identification située à l'arrière du produit. Installez votre produit horizontalement, sur un socle approprié (meuble), en laissant un espace suffisant pour la ventilation sur le pourtour 3~4 po. Faites attention à ne pas obstruer les orifices de ventilation.
DÉMARRAGE SOMMAIRE DÉMARRAGE 22 FONCTIONS 2 Caractéristiques 22 Mode entrée 3 Informations relatives à la sécurité 23 Bluetooth 6 Contenu 26 Mise à jour du logiciel 7 DESCRIPTIONS 27 DÉPANNAGE 7 Sur la face Avant/Du Haut 27 8 Face arrière/Inférieure 9 Télécommande FRA 2 Dépannage 28 ANNEXE 28 Spécifications 11 INSTALLATION 11 Installation de la fixation murale 11 Précautions d’installation 12 Installation du support sans référence au guide d’installation monté sur le mur
DÉMARRAGE CONTENU AVANT DE LIRE LE MANUEL D'UTILISATION Lisez attentivement la signification des termes suivants avant de commencer la lecture du manuel d'utilisation. + Icônes utilisées dans le présent manuel Icône Terme Mise en garde Remarque Définition Indique qu'une fonction ne fonctionne pas ou que des paramètres peuvent être annulés. Donne des conseils ou des instructions permettant d'améliorer l'utilisation de chaque fonction. Vérifiez que vous disposez bien des accessoires ci-dessous.
DESCRIPTIONS descriptions SUR LA FACE AVANT/DU HAUT FRA VOL. - / + Permet de régler le volume. La valeur numérique du volume sonore s’affiche sur le panneau avant. Touche (Alimentation) Permet d'allumer/d'éteindre l'ensemble Soundbar. Touches (Source) Écran d’affichage Sélection des entrées D.IN, AUX, BT, TV, USB. Affichent le mode actuel.
DESCRIPTIONS FACE ARRIÈRE/INFÉRIEURE AUX IN AUX IN (Port USB) Branchez les périphériques USB ici pour lire les fichiers des périphériques. Connexion jusqu'à la sortie analogique d'un périphérique externe. OPTICAL IN ÉTIQUETTE DC 24V (Entrée d’alimentation) Branchez la prise d’adaptateur d’alimentation c.c. à la source d’alimentation, puis branchez la fiche de l’adaptateur d’alimentation c.c. dans la prise murale. OPTICAL IN (D.
DESCRIPTIONS TÉLÉCOMMANDE FRA SOURCE Appuyez pour sélectionner une source branchée au Soundbar. Mise en sourdine Vous pouvez couper le volume en une seule étape sur pression d’un bouton. Appuyez de nouveau sur cette touche pour restaurer le volume initial. Répéter Vous pouvez régler la fonction Répéter lorsque vous écoutez des fichiers musicaux sur un périphérique USB. OFF - REPEAT : Annule la lecture à répétition. TRACK - REPEAT : Lit une piste de manière répétée.
DESCRIPTIONS Alimentation Permet d'allumer/d'éteindre l'ensemble Soundbar. Volume Pour régler le volume de l’unité. Lecture/Pause Appuyez de nouveau sur la touche & pour interrompre temporairement la lecture du fichier temporaire. Appuyez sur la touche & pour lire le fichier sélectionné. Saut vers l’arrière Lorsqu’un lecteur utilisé contient plus d’un fichier et que vous appuyez sur la touche #, le fichier précédent est sélectionné. SURR. LEVEL Appuyez sur la touche SURR. LEVEL.
INSTALLATION Installation FRA INSTALLATION DE LA FIXATION MURALE Vous pouvez utiliser le support de fixation mural pour fixer l’unité au mur. PRÉCAUTIONS D’INSTALLATION ● Ne procédez pas à l'installation sur un autre emplacement qu’un mur vertical. ● Pour l’installation, évitez les températures extrêmes et l’humidité ou encore un mur pas assez solide pour supporter le poids de l’appareil. ● Vérifiez la solidité du mur.
INSTALLATION 3. Serrez les supports à fixation murale et les vis aux emplacements sélectionnés. • Les supports gauche et droit ont des formes différentes. Assurez-vous de les placer correctement. Montage du Soundbar sur le mur 4. Fixez les deux vis du support dans les orifices de passage des vis à l’arrière du boîtier principal du Soundbar, une à gauche et une à droite. ● Insérez le câble USB à l’arrière du Soundbar avant de l’installer sur le mur. 5.
INSTALLATION 1. Placez le Support à fixation murale en L sur la surface murale désirée sur une ligne parallèle comme cela est illustré ci-haut. Marquez l’emplacement des orifices de passage des vis sur le mur. Percez des trous pour les vis aux endroits marqués. FRA 2. Faites correspondre les orifices de passage des vis sur le support à fixation murale en L avec les orifices de passage des vis sur le mur, puis vissez une vis dans l’orifice tout à fait à droite.
BRANCHEMENTS branchements ● On ne doit pas brancher le cordon d'alimentation de ce produit ou de votre téléviseur dans une prise murale à moins que toutes les connexions ne soient réalisées. ● Avant de déplacer ou installer ce produit, assurez-vous de couper l'alimentation et de débrancher le cordon d’alimentation.
BRANCHEMENTS FRA ● Avant de déplacer ou installer le produit, assurez-vous de couper l'alimentation et de débrancher le cordon d’alimentation. ● Si l’unité principale est éteinte, le caisson des basses sans fil sera en mode de veille et le VOYANT DEL BLEU STANDBY (VEILLE) sur la partie supérieure s'allumera après que le clignotement pendant 30 secondes du voyant DEL bleu Link (Lien).
BRANCHEMENTS CONNEXION À UN TÉLÉVISEUR BRANCHEMENT À UN TÉLÉVISEUR À L’AIDE D’UN CÂBLE OPTIQUE NUMÉRIQUE Câble Optique OPTICAL OUT OPTICAL IN 1. Connectez l’entrée OPTICAL IN (Audio) du Soundbar à la prise OPTICAL OUT du téléviseur à l’aide d’un câble optique numérique. (Source) sur la face supérieure de l’unité principale ou la touche SOURCE de la 2. Appuyez sur le bouton télécommande pour sélectionner le mode D.IN.
BRANCHEMENTS TV SOUNDCONNECT FRA Vous pouvez restituer le son du téléviseur par votre Soundbar branché à un téléviseur Samsung qui prend en charge la fonction de connexion TV Sound. Connexion 1. Allumez le téléviseur et le Soundbar. • Activez le menu du téléviseur. • Placez les réglages de l’enceinte sur l’onglet "Son". • Réglez le menu "Ajouter un nouveau périphérique" à "Activé". 2.
BRANCHEMENTS + Utilisation de la fonction Bluetooth POWER La fonction Bluetooth POWER On est accessible une fois que le Soundbar est correctement relié à un téléviseur compatible avec la technologie Bluetooth utilisant TV SoundConnect. Lorsque la fonction Bluetooth POWER On est ACTIVÉE, le fait de mettre le téléviseur branché en fonction et hors fonction allumera et éteindra aussi le Soundbar. 1. Branchez le téléviseur à votre Soundbar au moyen de la fonction TV SoundConnect. 2.
BRANCHEMENTS FRA CONNEXION AVEC UN PÉRIPHÉRIQUE EXTERNE Cette unité est équipée d’une prise d’entrée optique numérique et d’une prise d’entrée audio analogique. Cela vous permet d’effectuer le branchement à des périphériques externes. Câble Optique OPTICAL IN OPTICAL OUT Lecteur BD/ DVD/ Boîtier décodeur/ Console de jeu Câble Audio (non fourni) AUX OUT AUX IN CÂBLE AUX 1. Branchez l’entrée AUX IN (Audio) dans l’unité principale à la prise AUDIO OUT de l’appareil source. 2.
BRANCHEMENTS USB Vous pouvez lire des fichiers musicaux présents sur des périphériques de stockage USB par l’entremise du Soundbar. Écran d’affichage Port USB 1. Connectez le périphérique USB au port USB situé sur le produit. 2. Appuyez sur le bouton (Source) sur la face supérieure de l’unité principale ou la touche SOURCE de la télécommande pour sélectionner le mode USB. 3. USB apparaît à l’écran. • La connexion Soundbar à un périphérique USB est établie.
BRANCHEMENTS ● Liste de compatibilité: Codec Taux d’échantillonnage Débit binaire MPEG 1 Layer2 16 KHz à 48 KHz 80 à 320 kbps MPEG 1 Layer3 16 KHz à 48 KHz 80 à 320 kbps MPEG 2 Layer3 16 KHz à 48 KHz 80 à 320 kbps MPEG 2.5 Layer3 16 KHz à 48 KHz 80 à 320 kbps Wave_Format_MSAudio1 16 KHz à 48 KHz 56 à 128 kbps Wave_Format_MSAudio2 16 KHz à 48 KHz 56 à 128 kbps AAC 16 KHz à 96 KHz 48 à 320 kbps AAC-LC 16 KHz à 96 KHz FRA Rallonge *.mp3 *.wma 128 à 192 kbps *.
FONCTIONS fonctions MODE ENTRÉE Appuyez sur la touche (Source) sur la face supérieure de l’unité principale ou la touche SOURCE de la télécommande pour sélectionner le mode que vous voulez. Mode d'entrée Écran d’affichage Entrée Optique D.IN Entrée AUX AUX Mode BLUETOOTH BT TV SoundConnect TV Mode USB USB L'appareil s'éteint automatiquement dans les conditions suivantes: ● Mode D.IN/BT/TV/USB - Si aucun signal audio n’est reçu pendant 25 minutes.
FONCTIONS BLUETOOTH FRA Vous pouvez utiliser un dispositif BlueBooth connecté au Soundbar pour écouter de la musique en son stéréo de haute qualité, tout cela sans fil! CONNEXION DU SYSTÈME SOUNDBAR AU PÉRIPHÉRIQUE BLUETOOTH Vérifiez si le périphérique Bluetooth prend en charge la fonction de casque d'écoute stéréo compatible Bluetooth. Connexion Périphérique Bluetooth 1.
FONCTIONS ● ● ● ● ● ● ● ● ● ● ● ● Si l’on vous demande le code NIP lors de la connexion à un dispositif Bluetooth, entrez <0000>. On ne peut apparier qu'un seul périphérique Bluetooth à la fois. La connexion Bluetooth sera coupée lors de la mise hors fonction de Soundbar. Le Soundbar pourrait ne pas être compatible avec les fonctions de recherche ou de connexion Bluetooth dans les cas suivants : - Si un puissant champ électrique est émis autour du système Soundbar.
FONCTIONS FRA ● En mode de connexion Bluetooth, la connexion Bluetooth sera perdue si la distance entre Soundbar et l'appareil dépasse 32,8 pi. ● Le périphérique s'éteint automatiquement au bout de 25 minutes dans l'état Prêt. + Davantage d’information sur la technologie Bluetooth Bluetooth est une technologie facilitant l'interconnexion d'appareils compatibles Bluetooth via une connexion sans fil à faible distance.
FONCTIONS MISE À JOUR DU LOGICIEL Samsung pourrait offrir des mises à jour pour le micrologiciel du système Soundbar dans le futur. Si une mise à jour est offerte, vous pouvez l’intégrer au micrologiciel en connectant un périphérique USB contenant la mise à jour du micrologiciel dans le port USB du Soundbar. Notez qu’il y a plusieurs mises à jour de fichiers.
DÉPANNAGE Dépannage DÉPANNAGE FRA Avant de contacter l'assistance, veuillez lire ce qui suit. L'ensemble ne s'allume pas. Branchez la fiche d'alimentation électrique dans la prise murale. • Le cordon d'alimentation est-il branché dans la prise? La fonction ne s'active pas lorsque vous appuyez sur le bouton correspondant. Débranchez la fiche d'alimentation électrique et rebranchez-la. • L'air est-il chargé en électricité statique? Aucun son n'est émis.
ANNEXE annexe SPÉCIFICATIONS Nom du modèle HW-J370 USB Poids GÉNÉRAL Dimensions (L x H x P) 5V / 0,5A Unité Principale 3,45 lbs Caisson de basses (PS-WJ470) 10,12 lbs Enceinte ambiophonique 0,68 lbs Arrière (Ambiophonique) AMP (SWA-7000S) 1,63 lbs Unité Principale 37,1 x 2,3 x 2,6 po Caisson de basses (PS-WJ470) 7,1 x 14,2 x 11,8 po Enceinte ambiophonique 3,7 x 4,6 x 2,9 po Arrière (Ambiophonique) AMP (SWA-7000S) 2,0 x 7,9 x 5,2 po Plage de températures en fonctionnement +41°F à +95°F
GARANTIE LIMITÉE À L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication. SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA.
© 2015 Samsung Electronics Co., Ltd. Tous droits réservés. SIÈGE SOCIAL Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca_fr/support Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Center Area Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.