FULL MANUAL HW-N650 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE •• TO PREVENT ELECTRIC SHOCK, MATCH WIDE PERSONNEL. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Front Panel / Right Side Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundb
07 08 09 10 Connecting a Mobile Device 18 Connecting via Bluetooth -------------------------- 18 Using the Samsung Audio Remote App –– Installing the Samsung Audio Remote App –– Launching the Samsung Audio Remote App -------------------------- 21 -------------------------- 21 -------------------------- 21 Using the Remote Control 22 How to Use the Remote Control -------------------------- 22 Adjusting the Soundbar volume with a TV remote control -------------------------- 25 Using the Hidden
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 2 Power Cord (Subwoofer) AC/DC Adapter (Main Unit) Subwoofer Remote Control / Batteries Power Cord (AC/DC Adapter) HDMI Cable 3 •• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) •• The power components are labelled (1, 2, 3). For more information about power connections, see page 5.
02 PRODUCT OVERVIEW Front Panel / Right Side Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Right Side of the Soundbar Display Displays the product’s status and current mode. +/- (Volume) Button Adjusts the volume. •• When adjusted, the volume level appears on the Soundbar’s front display. (Source) Button Selects the source input mode. Input mode Display Optical Digital input D.IN ARC (HDMI OUT) input D.
Bottom Panel of the Soundbar USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) HDMI IN HDMI OUT (TV-ARC) DC 24V HDMI IN USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) HDMI OUT (TV-ARC) DC 24V USB (5V 0.5A) Connect a USB device here to play music files on the USB device through the Soundbar. AUX IN Connect to the Analog output of an external device. DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2, 3) to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1 Connect the power cord to the Subwoofer. 2 Connect the power output cable to the power adapter, and then to the Soundbar. 3 Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear will be Red after blinking Blue several times. •• If you use a device that uses the same frequency (5.
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-8500S user manual.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. NOTES •• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. •• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port. •• We recommend you use a coreless HDMI cable if possible.
2. Press the Left button on the remote control (the blue spot in the illustration to the right) for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default. (To turn off this function, hold the Left button on the remote for 5 seconds.) •• Depending on the connected device, Auto Power Link may not function. •• This function is only available in the “D.IN” mode. Method 2.
If the device fails to connect •• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Nxxx N-Series”) appears in the list, delete it. •• Then repeat steps 1 through 3. NOTE •• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect. Disconnecting the Soundbar from the TV Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable Bottom of the Soundbar HDMI OUT External Device HDMI Cable HDMI IN (ARC) HDMI IN HDMI OUT (TV-ARC) HDMI Cable HDMI Right Side of the Soundbar 1. Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2.
Connecting using an Optical or Analog Audio (AUX) Cable Right Side of the Soundbar BD / DVD player / Set-top box / Game console R - AUDIO - L USB (5V 0.5A) Audio (AUX) Cable (not supplied) AUX IN DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Optical Cable Bottom of the Soundbar (not supplied) 1 Audio (AUX) Cable XX Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port Display HDMI IN USB (5V 0.5A) HDMI OUT (TV-ARC) AUX IN DC 24V DIGITAL AUDIO IN (OPTICAL) USB USB (5V 0.5A) Micro USB to USB adapter Cable (not supplied) 1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 16KHz ~ 48KHz 80kbps~320kbps MPEG 1 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2.5 Layer3 16KHz ~ 48KHz 80kbps~320kbps Wave_Format_MSAudio1 16KHz ~ 48KHz 56kbps~128kbps Wave_Format_MSAudio2 16KHz ~ 48KHz 56kbps~128kbps AAC 16KHz ~ 96KHz 48kbps~320kbps AAC-LC 16KHz ~ 96KHz 128kbps~192kbps 5.1ch 320kbps HE-AAC 24KHz ~ 96KHz 48kbps~64kbps 5.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the right side panel and then select “BT”. Change “BT” to “BT READY”. b.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the right side of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the right side panel or on the remote control, and then change to any mode except “BT”.
Using the Samsung Audio Remote App Installing the Samsung Audio Remote App To control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio Remote app from the Google Play store. Market search : Samsung Audio Remote Launching the Samsung Audio Remote App To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device, and then follow the directions on the screen.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. Mute SOUND MODE VOL WOOFER •• BT PAIRING mode To turn on “BT PAIRING” mode, press and hold the (Source) button for more than 5 seconds.
Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display. You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list. PAIR Bluetooth PAIR SOUND MODE Play / Pause VOL WOOFER PAIR SOUND MODE Press the p button to pause a music file temporarily. When you press the button again, the music file plays. •• Auto Power Down Function The unit turns off automatically in the following situations. –– D.
•• Volume restriction function Because it may damage hearing when the power is turned on at high volumes, it adjusts the volume to 20 when the set volume is higher than 20. –– The default value for Volume restriction is off. The set volume is maintained even when the power is turned off. –– To change the setting, press and hold the Down button on the remote control for 5 seconds. With the volume restriction off, “V FREE” appears on the front display and with the function on, “V LOCK” appears.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER TV remote control On/Off (Standby) page 25 BT Pairing page 22 Auto Power Down On/Off (AUX mode) page 23 Initialize (Standby) page 30 BT Ready page 13 Left Auto Power Link ON/OFF page 23 Right Anynet+ ON/OFF page 23 Up ID SET page 23 Down Volume restriction On/Off page 24 7 Band EQ page 24 DRC ON/OFF (Standby) page 22 Bluetooth Power page 22 (Sourc
09 INSTALLING THE WALL MOUNT Wallmount Components Installation Precautions Wall Mount Guide •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce Holder-Screw (2 EA) Screw (2 EA) the wall or choose another installation point. •• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.).
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 SOFTWARE UPDATE Samsung may offer updates for the Soundbar’s system firmware in the future. USB port HDMI IN USB (5V 0.5A) HDMI OUT (TV-ARC) AUX IN DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely Micro USB to USB adapter Cable (not supplied) on the Holder-Screws.
Updating Procedure If UPDATE is not displayed 1. Connect a Micro USB to USB adapter cable 1. Turn off the Soundbar, disconnect and then with a male USB 2.0 Micro USB plug (Type B) reconnect the USB storage device that on one end and a standard female 2.0 USB contains the update files to the Soundbar’s jack (Type A) on the other end to the micro USB port. USB jack on your Soundbar. 2.
11 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ;; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ;; See the Bluetooth connection sections on pages 12 and 18. Sound is not produced.
12 LICENSE 13 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. (oss.request@samsung.com). 14 IMPORTANT NOTES ABOUT SERVICE Manufactured under license from DTS Licensing Limited.
15 SPECIFICATIONS AND GUIDE Specifications Model Name HW-N650 USB 5V/0.5A Weight 3.6 kg Dimensions(W x H x D) 1100.0 x 59.0 x 100.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power 30W x 6 + 10W x 2 LPCM 2ch, Dolby Audio™ Supported play formats (supporting Dolby® Digital), DTS Subwoofer Name PS-WN30 Weight 7.0 kg Dimensions(W x H x D) 215.0 x 384.5 x 304.
INFORMACIÓN DE SEGURIDAD ADVERTENCIAS DE SEGURIDAD PARA REDUCIR EL PELIGRO DE DESCARGA ADVERTENCIA •• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga este aparato a ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE la lluvia ni a lahumedad. TRASERA). PRECAUCIÓN NO CONTIENE ELEMENTOS QUE DEBA REEMPLAZAR EL USUARIO. EN CASO DE AVERÍA, •• PARA EVITAR DESCARGAS ELÉCTRICA S, SOLICITE LA AYUDA DE PERSONAL ESPECIALIZADO. INTRODUZCA TOTALMENTE EL ENCHUFE.
PRECAUCIONES 1. Asegúrese de que la fuente de alimentación de CA de su hogar cumpla con los requisitos mencionados en la etiqueta de identificación ubicada en la parte inferior del producto. Instale el producto horizontalmente, sobre una base adecuada (mueble), con espacio suficiente a su alrededor para ventilación 7~10 cm. Asegúrese de que los orificios de ventilación no queden tapados. No coloque la unidad sobre amplificadores o cualquier otro equipo que pueda generar calor.
ÍNDICE 01 Verificación de los Componentes Colocación de las pilas antes de utilizar el control remoto (2 pilas AA) 02 03 04 05 06 2 -------------------------- Descripción del Producto 2 3 Panel frontal/panel lateral derecho de la Soundbar -------------------------- 3 Panel inferior de la Soundbar -------------------------- 4 Conexión de la Soundbar 5 Conexión del suministro eléctrico -------------------------- 5 Conexión de la Soundbar al subwoofer –– Conexión automática entre el subwo
07 08 Conexión de un Dispositivo móvil 18 Conexión vía Bluetooth -------------------------- 18 Uso de la aplicación Samsung Audio Remote –– Instalación de la aplicación Samsung Audio Remote –– Inicio de la aplicación Samsung Audio Remote -------------------------- 21 -------------------------- 21 -------------------------- 21 Uso del Control Remoto 22 Cómo utilizar el control remoto -------------------------- 22 Ajuste del volumen de la Soundbar con el control remoto de un televisor ------------
01 VERIFICACIÓN DE LOS COMPONENTES PAIR SOUND MODE VOL WOOFER SOUNDBAR Unidad principal de la Soundbar 1 Cable de alimentación (Subwoofer) 2 Adaptador de CA/CC (Unidad principal) Subwoofer Control remoto/pilas Cable de alimentación (Adaptador de CA/CC) Cable HDMI 3 •• Para la fuente de alimentación y el consumo de energía, consulte la etiqueta pegada en el producto.
02 DESCRIPCIÓN DEL PRODUCTO Panel frontal/panel lateral derecho de la Soundbar Coloque el producto de manera que el logotipo de SAMSUNG quede en la parte superior. Lateral derecho de la Soundbar Pantalla Muestra el estado del producto y el modo actual. Botón +/- (Volumen) Permite ajustar el volumen. •• Una vez que haya ajustado el volumen, el nivel de volumen aparecerá en la pantalla frontal de la Soundbar. Botón (Fuente) Permite seleccionar el modo de entrada.
Panel inferior de la Soundbar USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) HDMI IN HDMI OUT (TV-ARC) DC 24V HDMI IN USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) HDMI OUT (TV-ARC) DC 24V USB (5V 0.5A) Conecte un dispositivo USB aquí para reproducir archivos de música que se encuentran en el dispositivo USB a través de la Soundbar. AUX IN Permite conectar la Soundbar a la salida analógica de un dispositivo externo.
03 CONEXIÓN DE LA SOUNDBAR Conexión del suministro eléctrico Utilice los componentes de alimentación (1, 2, 3) para conectar el subwoofer y la Soundbar a un tomacorriente en el siguiente orden: 1 Conecte el cable de alimentación al subwoofer. 2 Conecte el cable de alimentación al adaptador de energía y, luego, a la Soundbar. 3 Conecte el cable de alimentación a un enchufe. Consulte las siguientes ilustraciones.
Conexión de la Soundbar al subwoofer Cuando el subwoofer está conectado, puede disfrutar de sonidos graves potentes. Conexión automática entre el subwoofer y la Soundbar Cuando lo enciende después de conectar los cables de alimentación a la Soundbar y el subwoofer, el subwoofer se conectará automáticamente a la Soundbar. •• Cuando finaliza el emparejamiento automático, los indicadores azules de la parte posterior del subwoofer se encienden.
Conexión manual del subwoofer en caso de error en la conexión automática Antes de realizar el procedimiento de conexión manual que figura a continuación: •• Verifique si los cables de alimentación de la Soundbar y el subwoofer están conectados correctamente. •• Asegúrese de que la Soundbar esté encendida. 1. Mantenga presionado ID SET en la parte posterior del subwoofer durante al menos 5 segundos. •• El indicador rojo de la parte posterior del subwoofer se apaga y el indicador azul parpadea.
NOTAS •• No conecte el cable de alimentación de este producto ni de su televisor a una toma de pared hasta realizar todas las conexiones entre los componentes. •• Antes de mover o instalar este producto, asegúrese de apagar el equipo y desconectar el cable de alimentación. •• Si la unidad principal está apagada, el subwoofer inalámbrico pasará a modo de espera y el LED de STANDBY de la parte posterior se verá rojo después de parpadear con una luz azul varias veces.
2. Verifique el estado de espera del módulo receptor inalámbrico luego de enchufarlo a un tomacorriente. •• El indicador LED de LINK (LED azul) en el módulo receptor inalámbrico parpadea. Si el LED no parpadea, presione el botón ID SET en la parte posterior del módulo receptor inalámbrico con la punta de una lapicera por 5 o 6 segundos hasta que el indicador LED de LINK parpadee (en Azul). Para obtener más información sobre el LED, consulte el manual del usuario SWA-8500S.
04 CONEXIÓN A SU TELEVISOR Escuche el sonido de su televisor desde su Soundbar a través de conexiones por cable o inalámbricas. •• Cuando la Soundbar está conectada a un televisor Samsung seleccionado, esta se puede controlar mediante el control remoto del televisor. –– Esta función es compatible con Samsung Smart TV, modelos 2017 o posteriores, que admitan Bluetooth cuando conecte la Soundbar al televisor usando un cable óptico.
•• Si el “TV ARC” no aparece en la ventana de visualización de la unidad principal de la Soundbar, verifique que el cable HDMI esté conectado al puerto correspondiente. •• Utilice los botones de volumen en el control remoto del televisor para cambiar el volumen de la Soundbar. NOTAS •• HDMI es una interfaz que permite la transmisión digital de datos de video y audio con un único conector. •• Si el televisor cuenta con un puerto ARC, conecte el cable HDMI al puerto HDMI IN (ARC).
2. Pulse el botón Izquierda del control remoto (el punto azul en la ilustración que se encuentra a la derecha) durante 5 segundos para activar o desactivar Auto Power Link. •• La función Auto Power Link está configurada en ON de manera predeterminada. (Para desactivar esta función, mantenga pulsado el botón Izquierda del control remoto durante 5 segundos). •• Según el dispositivo conectado, es posible que la función Auto Power Link no funcione. •• Esta función solo está disponible en modo “D.IN”. Método 2.
Si el dispositivo no se conecta •• Si la lista de la Soundbar que se conectó anteriormente (p. ej. “[AV] Samsung Soundbar Nxxx N-Series”) aparece en la lista, bórrela. •• Luego, repita del Paso 1 al 3. NOTA •• Cuando ya ha conectado por primera vez la Soundbar a su televisor, utilice el modo “BT READY” para volver a conectarlo. Desconexión de la Soundbar del televisor Presione el botón (Fuente) en el panel lateral derecho o en el control remoto y cambie a un modo que no sea “BT”.
05 CONEXIÓN DE UN DISPOSITIVO EXTERNO Conéctese a un dispositivo externo a través de una red por cable o inalámbrica para reproducir el sonido de ese dispositivo externo a través de la Soundbar. Conexión con un cable HDMI Parte inferior de la Soundbar HDMI OUT Dispositivo externo Cable HDMI HDMI IN (ARC) HDMI IN HDMI OUT (TV-ARC) Cable HDMI HDMI Lateral derecho de la Soundbar 1.
Conexión con un cable de audio óptico o analógico (AUX) Lateral derecho de la Soundbar Reproductor de Blu-ray/Reproductor de DVD/ Decodificador/Consola de juegos R - AUDIO - L USB (5V 0.5A) Cable de audio (AUX) (no suministrado) AUX IN DIGITAL AUDIO IN (OPTICAL) Cable óptico OPTICAL OUT Parte inferior de la Soundbar (no suministrado) 1 Cable de audio (AUX) XX Conecte la AUX IN (Audio) de la unidad principal a la toma AUDIO OUT del dispositivo fuente con un cable de audio.
06 CONECTAR UN DISPOSITIVO DE ALMACENAMIENTO USB Puede reproducir archivos de música que se encuentran en dispositivos de almacenamiento a través de la Soundbar. Puerto USB Pantalla HDMI IN USB (5V 0.5A) HDMI OUT (TV-ARC) AUX IN DC 24V DIGITAL AUDIO IN (OPTICAL) USB USB (5V 0.5A) Cable adaptador micro USB a USB (no suministrado) 1. Conecte un cable adaptador micro USB a USB con un conector macho micro USB (tipo B) USB 2.0 en un extremo y un conector estándar hembra (tipo A) USB 2.
Lista de compatibilidad Extensión Códec Velocidad de muestreo Velocidad en bits *.mp3 MPEG 1 Layer2 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 1 Layer3 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 2 Layer3 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 2.
07 CONEXIÓN DE UN DISPOSITIVO MÓVIL Conexión vía Bluetooth Cuando un dispositivo móvil está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• No puede conectar más de un dispositivo Bluetooth a la vez. PAIR O Dispositivo Bluetooth ND SOUODE M La conexión inicial 1. Presione el botón (O) PAIR en el control remoto para ingresar al modo “BT PAIRING”. a. Presione el botón (Fuente) en el panel a la derecha y luego seleccione “BT”. Cambie “BT” a “BT READY”. b.
¿Cuál es la diferencia entre BT READY y BT PAIRING? •• BT READY : En este modo, puede buscar los televisores que se conectaron anteriormente o conectar un dispositivo móvil que conectó anteriormente a la Soundbar. •• BT PAIRING : En este modo, puede conectar un dispositivo nuevo a la Soundbar. (Pulse el botón PAIR del control remoto o mantenga pulsado el botón (Fuente) del lado derecho de la Soundbar durante más de 5 segundos, mientras la Soundbar esté en modo “BT”.
Desconexión del dispositivo Bluetooth de la Soundbar Puede desconectar el dispositivo Bluetooth de Soundbar. Para obtener instrucciones, consulte el manual del usuario del dispositivo Bluetooth. •• Soundbar se desconectará. •• Cuando se desconecta la Soundbar del dispositivo Bluetooth, aparecerá “BT DISCONNECTED” en la pantalla frontal de la Soundbar.
Uso de la aplicación Samsung Audio Remote Instalación de la aplicación Samsung Audio Remote Para controlar la Soundbar con su dispositivo inteligente y la aplicación Samsung Audio Remote, descargue la aplicación Samsung Audio Remote desde Play Store de Google.
08 USO DEL CONTROL REMOTO Cómo utilizar el control remoto Enciende y apaga la Soundbar. Encender PAIR Fuente Silencio SOUND MODE VOL WOOFER SOUNDBAR VOL SOUND MODE Presione el botón Fuente para seleccionar una fuente que esté conectada a la Soundbar. •• Modo BT PAIRING Para encender el modo”BT PAIRING” en el modo “BT”, mantenga presionado el botón (Fuente) durante más de 5 segundos. Presione el botón (Silencio) para silenciar el sonido.
Presione el botón PAIR. En la pantalla de la Soundbar aparece “BT PAIRING”. Puede conectar la Soundbar a un nuevo dispositivo con Bluetooth en este modo seleccionando la Soundbar desde la lista de búsqueda del dispositivo con Bluetooth. PAIR Bluetooth PAIR SOUND MODE Reproducir/ Pausar VOL BASS PAIR SOUND MODE Presione el botón p para pausar un archivo de música temporalmente. Si vuelve a presionar el botón, se reproduce el archivo de música.
•• Función de restricción del volumen Dado que cuando se activa a un nivel de volumen muy alto puede dañar la audición, se puede ajustar el volumen en 20 cuando este está más alto que 20. –– El valor predeterminado para la restricción del volumen esta desactivado. El volumen establecido se mantiene aun cuando está apagado. –– Para cambiar la configuración, mantenga presionado el botón Abajo en el control remoto durante 5 segundos.
4. Si quiere que la Soundbar vuelva al modo predeterminado (control a partir del control remoto de un televisor Samsung), mantenga levantado el botón del WOOFER durante 5 segundos repetidamente hasta que Si tiene un televisor Samsung, puede ajustar el volumen de la Soundbar usando el control remoto con puerto infrarrojo que viene con su televisor Samsung. remoto televisor Samsung) en la pantalla. 5 Sec 1. Apague la Soundbar.
Uso de los botones ocultos (botones con más de una función) Botón oculto Página de referencia Botón del mando a distancia Función WOOFER Encendido/Apagado control remoto del TV (espera) Página 25 Vinculación BT Página 22 Encendido/Apagado Auto Power Down (modo AUX) Página 23 Iniciar (espera) Página 30 (Fuente) p (Reproducir/Pausar) BT listo Página 13 Izquierda Auto Power Link ON/OFF Página 23 Derecha Anynet+ ON/OFF Página 23 Arriba ID SET Página 23 Abajo Encendido/Apagado Restricc
09 INSTALACIÓN DEL SOPORTE DE MONTAJE EN LA PARED Componentes de soporte Guía para montaje en la pared Precauciones para la instalación •• Instálelo en una pared vertical únicamente. •• No lo instale en un lugar donde la Tornillo de sujeción Tornillo (2 unidades) (2 unidades) temperatura sea alta o haya humedad. •• Verifique si la pared es lo suficientemente resistente como para soportar el peso del producto.
2. Haga coincidir la Línea central de la guía 5. Pase un tornillo (no suministrado) por cada para montaje en la pared con el centro de su Tornillo de sujeción y luego ajuste cada televisor (si va a montar la Soundbar debajo tornillo con firmeza en un orificio de soporte de su televisor) y luego fije la Guía para del tornillo. montaje en la pared a la pared con cinta adhesiva. •• Si no la va a montar debajo del televisor, coloque la Línea central en el centro del área de instalación. 6.
7. Para instalar la Soundbar con el Soporte de montaje en la pared ya colocado, cuelgue el soporte de montaje en la pared de los Tornillos de sujeción que están en la pared. 10 ACTUALIZACIÓN DEL SOFTWARE Es posible que Samsung ofrezca actualizaciones para el firmware del sistema de la Soundbar en el futuro. Puerto USB HDMI IN USB (5V 0.5A) HDMI OUT (TV-ARC) AUX IN DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) 8.
Procedimiento de actualización 1. Conecte un cable adaptador micro USB a Si no aparece la opción UPDATE 1. Apague la Soundbar, desconecte y vuelva a USB con un conector macho micro USB (tipo conectar el dispositivo de almacenamiento B) USB 2.0 en un extremo y un conector que contiene los archivos actualizados al estándar hembra (tipo A) USB 2.0 en el otro extremo al conector micro USB de su puerto USB de la Soundbar. 2. Desconecte el cable de alimentación de la Soundbar.
11 SOLUCIÓN DE PROBLEMAS Antes de buscar ayuda, controle lo siguiente. La unidad no enciende. ¿Está el cable de alimentación enchufado en el tomacorriente? ;; Conecte el enchufe al toma corriente. No puede utilizar una función cuando presiona el botón. ¿Hay electricidad estática en el aire? ;; Desconecte el enchufe y vuelva a conectarlo. No se escucha el sonido en el modo BT. ;; Consulte las secciones de conexión vía Bluetooth en las páginas 12 y 18. No se escucha el sonido.
12 LICENCIA 13 AVISO SOBRE LICENCIA DE CÓDIGO ABIERTO Manufactured under license from Dolby Para enviar consultas sobre fuentes abiertas, Laboratories. Dolby, Dolby Audio, Pro Logic, póngase en contacto con Samsung a través del and the double-D symbol are trademarks of correo electrónico (oss.request@samsung.com). Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
15 ESPECIFICACIONES Y GUÍA Especificaciones Nombre del modelo HW-N650 USB 5V/0,5A Peso 3,6 kg Dimensiones (An x Al x Pr) 1100,0 x 59,0 x 100,0 mm Rango de temperatura de servicio +5 °C a +35 °C Rango de humedad de servicio 10 % a 75 % AMPLIFICADOR Potencia nominal de salida 30W x 6 + 10W x 2 LPCM 2ch, Dolby Audio™ Formatos de reproducción compatibles (admite Dolby® Digital), DTS Nombre del subwoofer PS-WN30 Peso 7,0 kg Dimensiones (An x Al x Pr) 215,0 x 384,5 x 304,0 mm AMPLIFICADOR Po
© 2018 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. Country Contact Center Web Site ` Latin America MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com/mx/support BRAZIL 0800-124-421 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros) www.samsung.