SAFETY INFORMATION • The following also applies to the Wireless WARNING Subwoofer (PS-WR65BB). • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • To prevent injury, this apparatus must be SAFETY WARNINGS securely attached to the floor/wall in TO REDUCE THE RISK OF ELECTRIC SHOCK, DO accordance with the installation instructions. NOT REMOVE THE COVER (OR BACK). • This product contains chemicals known to the NO USER-SERVICEABLE PARTS ARE INSIDE.
FCC Radiation Exposure Statement: FCC Caution : This equipment complies with FCC radiation exposure limits set forth for an uncont rolled • Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) between t he radiator and your body.
10. Protect the power cord from being walked on or pinched particularly at plugs, To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if convenience receptacles, and the point you intend to leave it unused for a long where they exit from the apparatus. period of time. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung's on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung's website. (http://www.samsung.
CONTENTS 01 02 03 04 05 06 Checking the Components 2 Inserting Batteries before using the Remote Control (AA batteries X 2) 2 Product Overview 3 Front Panel/ Top Panel of the Sound bar 3 Bottom Panel of the Sound bar 3 Connecting the Soundbar 4 Connecting Electrical Power 4 Connecting the Soundbar to the Subwoofer - Automatic connection between the Subwoofer and the Sound bar - Manually connecting the Subwoofer if automatic connection fails 5 5 6 Connecting an SWA-8500S (Sold Separatel
07 16 Connecting a Mobile Device 16 Connecting via Bluetooth 08 09 18 Using the Remote Control How to Use the Remote Control 18 Adjusting the Soundbar volume with a TV remote control 21 22 Installing the Wall Mount -- Installation Precautions 22 22 Wallmount Components 10 Placing the Soundbar on a TV stand 24 11 Troubleshooting 25 12 License 26 13 Open Source License Notice 26 14 Important Notes About Service 26 15 Specifications and Guide 27 27 Specifications ENG-vii
01 CHECKING THE COMPONENTS Soundbar Main Unit C )J x2 Power Cord (Subwoofer, Soundbar) (AH81-09826A) I . -: :;::_ . .I Wall Mount Guide (AH81-09822A) Subwoofer Remote Control (AH81-09784A) / Batteries ~ AC/DC Adapter (Soundbar) (AH81-09783A) HDMICable (AH81-11233A) ~x2 Holder-Screw (AH81- 09824A) Bracket-Wall Mount (AH81-09823A) Screw (AH81-09825A) • For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel/ Top Panel of the Sound bar .. Power Position the product so that the SAMSUNG logo is_ J located on the top. Volume TopPanel D _J \I llll--- Display Bottom Panel of the Soundbar D Source Pl i1 USB (SV 0.SA) m Ii m Selects the source input mode. (D.IN / HDMI / BT / USB) • To turn on "BT PAIRING" mode, change the source to "BT" mode, and then press and hold the cgj] (Source) button for more than 5 seconds.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Sound bar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Sound bar. 3. Connect the power cord to a wall socket. See the illustrations below. • For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Sound bar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Sound bar. • When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and subwoofer are connected properly. • Make sure that the Sound bar is turned on. 1. Press and hold ID SET on the rear of t he subwoofer for at least 5 seconds. • The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. Rear of Subwoofer 2.
Connecting an SWA-8500S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8500S, sold separately) to your Sound bar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. - The speaker cables are color coded. 2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. • The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks.
3. Press and hold the Up button on the remote control for at least 5 seconds. • The ID SET message appears on the display of the Sound bar for a moment, and then it disappears. • The Sound bar will automatically power on when ID SET is complete. ( SAMSUNG logo is on the top ] ~ it CAUTION • If your Sound bar was playing music when it connects to the SWA-8500S, you may hear some stuttering from the woofer as the connection finalizes. 4. Check if the LINK LED is solid blue (connection complete).
04 CONNECTING TO YOUR TV Hear TV sound from your Sound bar through wired or wireless connections. • When the Soundbar is connected to selected Samsung TVs, the Sound bar can be controlled using the TV's remote control. - This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. - This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
• If "TV ARC" does not appear in the display window of the Sound bar main unit, confirm that the HDMI cable is connected to the correct port. • Use the volume buttons on the TV's remote control to change the volume on the Soundbar. Connecting using an Optical Cable Bottom of the Sound bar Optical Cable o--a (not supplied) Top of the Sound bar
NOTES • It can operate according to the Codec supported by TV. Be sure to check the specification of your TV. • The Q-Symphony function is supported by some Samsung TV models released in 2020. (The TV menus may differ depending on the model. Refer to TV's User Manual.) • The function is enabled in "D.IN" mode. Connect the HDMI IN (ARC)/OPTICAL OUT port on your TV. Method 2.
If the device fails to connect • If a previously connected Sound bar listing (e.g. "[AV] Samsung Soundbar Q6T-Series") appears in the list, delete it. • Then repeat steps 1 through 3. Disconnecting the Soundbar from the TV Press the cgJj (Source) button on the top panel or on the remote control and switch to any mode but "BT". • Disconnecting takes time because the TV must receive a response from the Sound bar. (The time required may differ, depending on the TV model.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device's sound through the Soundbar. Connecting using an HDMI Cable Bottom of the Soundbar External Device HDMICable HDMICable Top of the Sound bar m ..r HDMI 1. Connect an HDMI cable from the HDMI jack on the back of the product to the HDMI OUT jack on your digital device. 2.
Connecting using an Optical Cable Bottom of the Sound bar BD / DVD player / Optical Cable Set-top box/ (not supplied) Game console D--- Top of the Soundbar (!) - + .... 0 .1N J 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital Optical Cable (not supplied). 2. Select "D.IN" mode by pressing the cg] (Source) button on the top panel or on the remote control.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USBport :I USB 15V OSA) 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the cgj] (Source) button on the top panel or on the remote control, and then select "USB". 3. "USB"appears in the display screen. 4. Play music files from the USB storage device through the Sound bar.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • The connection is limited to one TV or two Bluetooth devices at the same time. D OR Bluetooth device The initial connection 1. Press the (OR) t PAIR button on the remote control to enter the "BT PAIRING" mode. a. Press the cgj] (Source) button on the top panel and then select "BT".
Bluetooth Multi connection The Sound bar can be connected to 2 Bluetooth devices at the same time. Bluetooth device A Bluetooth device B 1. Connect the Sound bar to up to two Bluetooth devices. (See page 16) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. To play music from the Bluetooth device "B" while playing from the device "A", pause or stop playback on the device "A" and then start playing on the device "B".
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Sound bar on and off. D Power e Press to select a source connected to the Sound bar. Source Bl Press the ~ (Mute) button to mute the sound. Press it again to unmute the sound. Mute -- SOUND MODE You can select the desired sound effect by choosing STANDARD, SURROUND SOUND, GAME PRO, ADAPTIVE SOUND, or DTS VIRTUAL:X. - STANDARD Outputs the original sound. - SURROUND SOUND Provides a wider sound field than standard.
• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) • Bluetooth Power This feature automatically turns the Sound bar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.
e You can select TREBLE, BASS, or AUDIO SYNC • To control the volume of the treble or bass sound, press the Sound Control button to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/ Sound Control Down buttons. • If the video on the TV and audio from the Sound bar are not synchronized, press the Sound Control button to select AUDIO SYNC and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. (Not available in "USB" or "BT" mode.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar's volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until "SAMSUNG-TV REMOTE" appears in the default mode (control by a Samsung TV remote), push up and hold the WOOFER display.
Wallmount Components 09 INSTALLING THE WALL MOUNT --: I . ·-- 8 AT'l'N ,,.._ .. Wall Mount Guide (AH81-09822A) Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to Holder-Screw Screw (AH81-09824A) (AH81-09825A) support the product's weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide's Center Line 5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw with the center of your TV (if you are mounting the Sound bar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. • If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Sound bar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 PLACING THE SOUNDBAR ON A TV STAND Place the Soundbar on a TV stand. 8. Slide the Sound bar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
11 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the inst ructions below do not help, t urn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. The remote control does not work.
12 LICENSE 13 OPEN SOURCE LICENSE NOTICE [I] DOLBY To send inquiries and requests regarding open AUD IO sources, contact Samsung via Email Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. ~ db Digital Surround For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
15 SPECIFICATIONS AND GUIDE Specifications Model Name HW-Q60T USB SV/0.SA Weight 7.5 lbs (3.4 kg) 38.6 x 2.3 x 4.2 inches Dimensions (W x H x D) (980.0 x 58.0 x 105.0 mm) Operating Temperature Range +41°F to +95°F (+5°C to +35°C) Operating Humidity Range 10%-75 % AMPLIFIER Rated Output power Supported play formats 30W x 6 + l0W x 2 LPCM 2ch, Dolby Audio™ (supporting Dolby® Digital), DTS, DTS Virtual:X Subwoofer Name PS-WR65BB 13.7 lbs (6.2 kg) Weight 8.1 x 13.9 x 11.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
FULL MANUAL HW-Q60T Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). •• To prevent injury, this apparatus must be NO USER-SERVICEABLE PARTS ARE INSIDE. securely attached to the floor/wall in REFER SERVICING TO QUALIFIED SERVICE accordance with the installation instructions. PERSONNEL.
Radiation Exposure Statement 10. Protect the power cord from being walked This equipment complies with IC RSS-102 on or pinched particularly at plugs, radiation exposure limits set forth for an convenience receptacles, and the point uncontrolled environment. This equipment should be installed and operated with minimum distance where they exit from the apparatus. 11. Only use attachments/accessories specified 20 cm between the radiator & your body. by the manufacturer. 12.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Front Panel / Top Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– M
07 Connecting a Mobile Device Connecting via Bluetooth 08 09 18 -------------------------- 18 Using the Remote Control 22 How to Use the Remote Control -------------------------- 22 Adjusting the Soundbar volume with a TV remote control -------------------------- 25 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 26 Output specifications for the different sound effect modes -------------------------- 26 Installing the Wall Mount 27 Installation Prec
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit Subwoofer Remote Control / Batteries AC/DC Adapter (Soundbar) HDMI Cable x2 Power Cord (Subwoofer, Soundbar) x2 Wall Mount Guide Holder-Screw x2 Bracket-Wall Mount x2 Screw •• For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes. -/+ (Volume) Button Adjusts the volume.
Bottom Panel of the Soundbar HDMI HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DC 24V HDMI USB (5V 0.5A) HDMI TO TV (ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar. DC 24V (Power Supply In) Connect the AC/DC power adapter. HDMI Inputs digital video and audio signals simultaneously using an HDMI cable. Connect to the HDMI output of an external device.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Soundbar. 3. Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times. •• If you use a device that uses the same frequency (5.
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-8500S user manual.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
•• If TV sound is inaudible, press the (Source) button on the remote control or on the top of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played. •• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, “TV+Soundbar” appears under the Sound Output menu of the TV. Select the corresponding menu. TV Menu D.IN HDMI Cable OR Optical Cable (not supplied) •• TV menu example: TV series name + [AV] Soundbar series name (HDMI) NOTES •• It can operate according to the Codec supported by TV.
Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable Bottom of the Soundbar HDMI OUT External Device HDMI HDMI Cable HDMI IN (ARC) HDMI Cable HDMI TO TV (ARC) Top of the Soundbar HDMI 1. Connect an HDMI cable from the HDMI jack on the back of the product to the HDMI OUT jack on your digital device. 2.
Connecting using an Optical Cable Bottom of the Soundbar BD / DVD player / HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) Optical Cable Set-top box / (not supplied) Game console OPTICAL OUT Top of the Soundbar D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital Optical Cable (not supplied). 2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port HDMI USB (5V 0.5A) HDMI TO TV (ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) USB 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• The connection is limited to one TV or two Bluetooth devices at the same time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
Bluetooth Multi connection The Soundbar can be connected to 2 Bluetooth devices at the same time. Bluetooth device A Bluetooth device B 1. Connect the Soundbar to up to two Bluetooth devices. (See page 18) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. To play music from the Bluetooth device “B” while playing from the device “A”, pause or stop playback on the device “A” and then start playing on the device “B”.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. SOUND MODE PAIR Mute SOUND MODE You can select the desired sound effect by SOUND MODE SOUND MODE VOL WOOFER –– STANDARD Outputs the original sound. –– SURROUND SOUND PAIR Provides a wider sound field than standard.
•• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) •• Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.
•• Volume Restriction function To protect your hearing, the Volume Restriction function restricts the volume to 20 if you turn on the Soundbar when the volume is set higher than 20. –– The default value for the Volume Restriction function is Off. You must turn it on to activate it. –– When turned on, the Volume Restriction function stays on even when the power is turned off. –– To turn Volume Restriction on or off, press and hold the Down button on the remote control for 5 seconds.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 25 p (Play / Pause) Initialize (Standby) page 30 Left TV Auto connect On/Off (BT Ready) page 14 Up ID SET (Standby) page 23 Down Volume Restriction On/Off (Standby) page 24 7 Band EQ page 24 DRC ON/OFF (Standby) page 23 Bluetooth Power page 23 (Sound Control) SOUND MODE Output specifications for the different
09 INSTALLING THE WALL MOUNT Wallmount Components Wall Mount Guide Installation Precautions x2 •• Install on a vertical wall only. •• Do not install in a place with high x2 Holder-Screw temperature or humidity. •• Verify whether the wall is strong enough to Screw x2 support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 PLACING THE SOUNDBAR ON A TV STAND Place the Soundbar on a TV stand. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. •• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the 1.
11 SOFTWARE UPDATE Update Procedure Important: The updating function erases all user settings. We recommend you write down your settings so that you can easily reset them after Samsung may offer updates for the Soundbar’s the update. Note that updating the firmware system firmware in the future. resets the subwoofer connection too. 1. Connect a USB thumb drive to the USB port USB port on your computer. Important: Make sure there are no music HDMI USB (5V 0.
If UPDATE is not displayed 1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port. 2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar. NOTES •• The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. •• Do not disconnect the power or remove the USB device while updates are being applied.
12 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. The remote control does not work. Is the power cord firmly plugged into the wall Are the batteries drained? outlet and power adapter? ;; Replace with new batteries. ;; Unplug and reconnect the power cord to Is the distance between the remote control and the wall outlet and the power adapter to Soundbar main unit too far? make sure the connection is secure.
13 LICENSE 14 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, Digital Surround, and the Digital Surround logo are registered trademarks or trademarks of DTS, Inc.
16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-Q60T USB 5V/0.5A Weight 7.5 lbs (3.4 kg) 38.6 x 2.3 x 4.2 inches Dimensions (W x H x D) (980.0 x 58.0 x 105.0 mm) Operating Temperature Range +41°F to +95°F (+5°C to +35°C) Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power Supported play formats 30W x 6 + 10W x 2 LPCM 2ch, Dolby Audio™ (supporting Dolby® Digital), DTS, DTS Virtual:X Subwoofer Name PS-WR65BB Weight 13.7 Ibs (6.2 kg) 8.1 x 13.9 x 11.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
© 2020 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Area Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.
CENTER LINE A TYPE: 616mm B TYPE-: 360mm A0 AH63-04369C-00