SAMSUNG harman/kardon USER MANUAL HW-QSOR
SAFETY INFORMATION • The following also applies to the Wireless WARNING Subwoofer (PS-WR75B). • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • To prevent injury, this apparatus must be SAFETY WARNINGS securely attached to the floor/wall in TO REDUCE THE RISK OF ELECTRIC SHOCK, DO accordance with the installation instructions. NOT REMOVE THE COVER (OR BACK). • This product contains chemicals known to the NO USER-SERVICEABLE PARTS ARE INSIDE.
FCC Radiation Exposure Statement : FCC Caution : This equipment complies with FCC radiation • Any changes or modifications not expressly compliance could void the user's authority to exposure limits set forth for an uncontrolled environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) approved by the party responsible for between the radiator and your body.
To fully turn off the unit, disconnect the AC 10. Protect the power cord from being walked on or pinched particularly at plugs, plug from the wall outlet. Unplug the unit if convenience receptacles, and the point you intend to leave it unused for a long where they exit from the apparatus. period of time. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table 2.
ABOUT THIS MANUAL The usermanual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL l!Jm• l!J· ~ -.. ,rt.". .: You can access the FULL MANUAL on Samsung's on-line customer support center by scanning the QR code on the left.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 2 - --- Product Overview 3 Front Panel/ Top Panel of the Soundbar 3 Bottom Panel of the Sound bar 3 Connecting the Soundbar 4 Connecting Electrical Power 4 Connecting the Sound bar to the Subwoofer 5 5 6 - Automatic connection between the Subwoofer and the Soundbar - Manually connecting the Subwoofer if automatic connection fails Connecting an SWA-9000S (Sold Separately) to your
06 Connecting a Mobile Device Connecting via Bluetooth , Connecting via Wi-Fi (Wireless Network) 07 08 09 Using the Remote Control 18 78 79 20 How to Use the Remote Control - - - - 20 Adjusting the Sound bar volume with a TV remote control - - - - 23 Installing the Wall Mount 24 Installation Precautions - - - - 24 Wallmount Components - - - - 24 Installing the Soundbar above a TV Stand Component 26 26 10 Software Update 27 11 Troubleshooting 28 12 License 29 13 Open Source Li
01 CHECKING THE COMPONENTS ,__,~ -7- •t,.r,;,,, ",. ,.,. • ,--,:•.,i. ..,,,:.,.-,.,.~n, ..,!f"'_, ,~.,.,..., ~";;(":\'I'. ,c-,i,-..e..v· ~),~~1'-~il-~~~1.;J~;;-19~: Soundbar Main Unit 0 I ' Remote Control (AH59-02767C) / Batteries f) C JJ C )JI Power Cord (Subwoofer) (3903-001117) Power Cord (Main Unit) (3903-001117) - -: :;:::= A . .
02 PRODUCT OVERVIEW Front Panel/ Top Panel of the Sound bar Power Position the product so that the "Samsung Harman Kardon" r logo is located on the top. Top Panel Display ;_-,_--==-~~=-;: :~.; ~-=----=---=--=-=-= ---=-==-=-=-= ~=-= ___,, =7-'I Bottom Panel of the Sound bar .. D fl i] m m m Source Selects the source input mode. (D.IN / HDMI 1 / HDMI 2 / WIFI / BT) POWER Connect the Soundbar's AC power cable. IDSET NETWORK SERVICE D.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (0 , 8 ) to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 0 8 Connect the power cord to the Subwoofer. Connect the power cord to the Sound bar. See the illustrations below. • For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Sound bar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Sound bar When you t urn the power on after connecting the power cables to the Sound bar and subwoofer, the subwoofer is automatically connected to the Sound bar. • When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: • Check whether the power cables for the Sound bar and subwoofer are connected properly. • Make sure that the Sound bar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. • The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. Rear of Subwoofer 2.
Connecting an SWA-9000S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9000S, sold separately) to your Sound bar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. - The speaker cables are color coded. 2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. • The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks.
3. Press and hold the Up button on the remote control for at least 5 seconds. • The ID SET message appears on the display of the Soundbar for a moment, and then 1t disappears. • The Sound bar will automatically power on when ID SET is complete. HSamsung Harman Kardon" logo is on the top IDSET Lt,CAUTION • If your Soundbar was playing music when it connects to the SWA-9000S, you may hear some stuttering from the woofer as the connection finalizes. 4.
04 CONNECTING TO YOUR TV Hear TV sound from your Sound bar through wired or wireless connections. • When the Sound bar is connected to selected Samsung TVs, the Sound bar can be controlled using the TV's remote control. - This feature is available on 2017 and later Samsung Smart TVs that support Bluetooth when the Sound bar is connected to the TV using an optical cable. - This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. • Use the volume buttons on the TV's remote control to change the volume on the Sound bar. Connecting using an Optical Cable : I I I • I I I • DIGITAL MJDIO IN 10PTICAL, OPTICAL OUT Top of the Sound bar '£1-+ D.IN 1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Sound bar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied). 2.
Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • Only one TV can be connected at a time. Top of the Soundbar OR The initial connection 1. Press the (OR) t PAIR button on the remote control to enter the "BT PAIRING" mode. a. Press the~ (Source) button on the top panel and then select "BT".
Disconnecting the Soundbarfrom the TV Press the cgj] (Source) button on the top panel or on the remote control and switch to any mode but "BT". • Disconnecting takes time because the TV must receive a response from the Sound bar. (The time required may differ, depending on the TV model.) • To cancel the automatic Bluetooth connection between the Sound bar and TV, press the ►II (Play/Pause) button on the remote control for 5 seconds with the Sound bar in "BT READY" status.
Connecting via Wi-Fi Pre-connection Checklist 1. Confirm that your Samsung Smart TV was released after 2013. This function is compatible only with Samsung Smart TVs released after 2013. 2. Make sure your Wireless router (Wi-Fi) is ready and working. 3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network). Top of the Soundbar 1~------l v G.- ' II] Step 1: Connecting the Soundbarto Wi-Fi 1.
Step 2 : Configuring Settings on the TV • If the TV disconnects from your wireless network after you change the input source to the Sound bar, use the TV menu to connect the TV to the network again.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device's sound through the Sound bar. Connecting using an HDMI Cable (Capable of Dolby Atmos decoding and playback) • When you use Dolby Atmos®: If the input source is Dolby Atmos®, 5.1.2 channels are outputted. When Dolby Atmos® is active, the Sound bar's sound effect modes controlled by the SOUND MODE button are not available.
NOTE • When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display. Configuring Dolby Atmos® on your BD player or other device. • Open the audio output options on the settings menu of your BD player or other device and make sure that "No Encoding" is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu ➔ Sound ➔ Digital Output and then select Bitstream (unprocessed). • If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
Connecting using an Optical Cable Top of the Sound bar BD / DVD player/ Set-top box/ Game console D.IN Optical Cable (not supplied) Bottom of the Soundbar 1. Connect DIGITAL AUDIO IN (OPTICAL} on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable (not supplied). 2. Select "D.IN" mode by pressing the cgj] (Source} button on the top panel or on the remote control.
06 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • You cannot connect more than one Bluetooth device at a time. Top of the Soundbar + l ,
Connecting via Wi-Fi (Wireless Network) • Connect a single Sound bar to Wi-Fi to access a variety of music streaming services and Internet radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or the stereo sound mode. • To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. Top of the Sound bar [! (!)€]-+ I Mobile device The initial connection 1.
07 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. D Power fl G Press to select a source connected to t he Sound bar. Source e Press the ~ (Mute) button to mute the sound. Press it again to unmute the sound. Mute m I You can select the desired sound mode by choosing STANDARD, SURROUND, GAME PRO, or ADAPTIVE SOUND. SOUND MODE @ 8 Bluetooth PAIR ENG-20 Press the * PAIR button. "BT PAIRING" appears in the Soundbar's display.
Press the 111-11 button to pause a music file temporarily. When you press the button again, the music file plays. Play /Pause (BT/Wi-Fi) 0 Press the indicated areas to select Up/Down/Left/Right. Up/Down/ Left/Right Press Up/Down/Left/Right on the button to select or set functions. • MusicSkip Press the Right button to select the next music file. Press the Left button to select the previous music file. • Anynet+ / Auto Power Link You can turn Anynet+ and Auto Power Link on or off.
m - You can select TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP LEVEL, REAR LEVEL, and VIRTUAL ON/OFF. • To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Sound Control Settings, and then adjust the volume between -6-+6 by using the Up/Down buttons. • To control the volume of the each speaker select CENTER LEVEL, SIDE LEVEL or FRONT TOP LEVEL in Sound Settings, and then adJust the volume between -6-+6 by using the Up/Down buttons.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Sound bar to the If you have a Samsung TV, you can adjust the Soundbar's volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote to control the Sound bar's volume. For more information, see the TV's user manual.
Wallmount Components 08 INSTALLING THE WALL MOUNT --: ,.,,. _ I • .,"'" • '._ I Wall Mount Guide (AH63-04369C) Installation Precautions • Install on a vertical wall only. • Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs. • Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.
2. Align the Wall Mount Guide's Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Sound bar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. ((,) -~ • If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Sound bar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 09 INSTALLING THE SOUNDBAR ABOVEATV STAND Component 8. Slide the Soundbar down as shown below so ~x4 that the Bracket-Wall Mounts rest securely on the Holder-Screws.
10 SOFTWARE UPDATE When the Sound bar is connected to the Internet, software updates automatically occur even when the Sound bar is turned off. • To use the Auto Update function, the Sound bar must be connected to the Internet. The Wi-Fi connection to the Sound bar will be terminated if the Sound bar's power cord is disconnected or the power is cut off. If the power is cut off, when the power comes back on or you reconnect the power cord, turn on theSoundba~andthenreconnectlttothe Internet.
11 TROUBLESHOOTING Refer to the instructions below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The red LED on the subwoofer blinks and the subwoofer is not producing sound. The unit will not turn on. Is the power cord plugged into the outlet? .... Connect the power plug to the outlet.
-+ 12 LICENSE Connected via Wi-Fi 1. Check if the TV is a compatible model. ' • Only Samsung Smart TVs released [I] after 2013 are supported. DOLBY 2. Check if the TV is connected to Wi-Fi. ATMOS • If the TV is not connected to Wi-Fi, use the network menu on the TV to establish a connection. (See the TV user manual.) Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, Dolby Digital Plus, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. 3.
13 OPEN SOURCE LICENSE NOTICE For further information on Open Sources used in this product, please visit the website: http://opensource.samsung.com 14 IMPORTANT NOTES ABOUT SERVICE • Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. • Ar1 administration fee may be charged if either: a. An engineer is called out to your home at your request and there is no defect in the product. b.
15 SPECIFICATIONS AND GUIDE Specifications HW-Q80R Model Name -- 19.4 lbs (8.8 kg) Weight 48.3 x 3.3 x 5.4 inches Dimensions (W x H x D) (1226.0 x 83.0 x 136.0 mm) +41°F to +95°F (+5°C to +35°C) Operating Temperature Range 10%-75% Operating Humidity Range AMPLIFIER 18W x 10 + 10W x 3, 4ohm Rated Output power LPCM 8ch, Dolby Digital, Supported play formats Dolby Atmos (True HD/ Digital Plus), DTS:X Subwoofer Name PS-WR75B 21.6 lbs (9.8 kg) Weight 8.1 x 15.9 x 15.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
SAMSUNG harman/kardon ENERGY STAR Certification model only The party responsible for product compliance: Samsung Electronics America, Inc. QA Lab America 19 Chapin Rd. Building D Pine Brook NJ 07058 Tel: 1-973-808-6375 QUESTIONS OR COMMENTS? IN THE us L 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 © 2019 Samsung Electronics Co., Ltd. All rights reserved.
FULL MANUAL HW-Q80R Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). •• To prevent injury, this apparatus must be NO USER-SERVICEABLE PARTS ARE INSIDE. securely attached to the floor/wall in REFER SERVICING TO QUALIFIED SERVICE accordance with the installation instructions. PERSONNEL.
Radiation Exposure Statement 10. Protect the power cord from being walked This equipment complies with IC RSS-102 on or pinched particularly at plugs, radiation exposure limits set forth for an convenience receptacles, and the point uncontrolled environment. This equipment should be installed and operated with minimum distance where they exit from the apparatus. 11. Only use attachments/accessories specified 20 cm between the radiator & your body. by the manufacturer. 12.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Front Panel / Top Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– M
07 08 09 10 Connecting an Amazon product 24 Connect and use with an Amazon product (Amazon Echo) -------------------------- 24 Use voice commands to control the Soundbar -------------------------- 26 Using the Remote Control 27 How to Use the Remote Control -------------------------- 27 Adjusting the Soundbar volume with a TV remote control -------------------------- 30 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 31 Output specifications for th
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 Remote Control / Batteries Subwoofer 2 x2 Power Cord (Subwoofer) Power Cord (Main Unit) HDMI Cable x2 x2 Bracket-Wall Mount x4 (M4 x L10) Wall Mount Guide Holder-Screw Screw Rubber-Foot •• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) •• The power components are labelled (1, 2).
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the Top Panel "Samsung Harman Kardon" logo is located on the top. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / HDMI 1 / HDMI 2 / WIFI / BT mode if there is no audio signal for 18 minutes. (Source) Button Selects the source input mode. Input mode Display Optical Digital input D.
DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) POWER POWER SERVICE POWER SERVICE ID SET (WOOFER/REAR) ID SET (WOOFER/REAR) NETWORK NETWORK NETWORK Bottom Panel of the Soundbar DIGITAL AUDIO IN (OPTICAL) SERVICE ID SET (WOOFER/REAR) HDMI IN 1 HDMI IN 1 HDMI IN 1 HDMI IN 2 HDMI IN 2 HDMI IN 2 HDMI OUT (TV-ARC) HDMI OUT (TV-ARC) HDMI OUT (TV-ARC) POWER POWER POWER ID SET ID SET ID SET (WOOFER/REAR) (WOOFER/REAR) (WOOFER/REAR) SERVICE SERVICE SERVICE HDMI HDMI INHDMI I
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2) to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1 Connect the power cord to the Subwoofer. 2 Connect the power cord to the Soundbar. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times. •• If you use a device that uses the same frequency (5.
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-9000S user manual.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is available on 2017 and later Samsung Smart TVs that support Bluetooth when the Soundbar is connected to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. NOTES •• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. •• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port. •• We recommend you use a coreless HDMI cable if possible.
Auto Power Link Auto Power Link automatically turns on the Soundbar when the TV is turned on. 1. Connect the Soundbar and a TV with a digital optical cable (not supplied). 2. Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default. (To turn off this function, press the Left button on the remote for 5 seconds.) •• Depending on the connected device, Auto Power Link may not function. •• This function is only available in the “D.
If the device fails to connect •• If a previously connected Soundbar (e.g. “[AV] Samsung Soundbar Q80R”) appears in the list, delete it. •• Then repeat steps 1 through 3. NOTE •• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect. Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar.
Connecting via Wi-Fi Pre-connection Checklist 1. Confirm that your Samsung Smart TV was released after 2013. This function is compatible only with Samsung Smart TVs released after 2013. 2. Make sure your Wireless router (Wi-Fi) is ready and working. 3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network). Top of the Soundbar Mobile device Step 1 : Connecting the Soundbar to Wi-Fi 1.
Step 2 : Configuring Settings on the TV •• If the TV disconnects from your wireless network after you change the input source to the Soundbar, use the TV menu to connect the TV to the network again.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable (Capable of Dolby Atmos decoding and playback) •• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 5.1.2 channels are outputted. When Dolby Atmos® is active, the Soundbar’s sound effect modes controlled by the SOUND MODE button are not available.
NOTE •• When Dolby Atmos® is activated, “DOLBY ATMOS” appears in the front display. Configuring Dolby Atmos® on your BD player or other device. •• Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed). •• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
Connecting using an Optical Cable Top of the Soundbar BD / DVD player / Set-top box / Game console D.IN OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) Optical Cable (not supplied) Bottom of the Soundbar 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable (not supplied). 2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.
06 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. Top of the Soundbar PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
Connecting via Wi-Fi (Wireless Network) •• Connect a single Soundbar to Wi-Fi to access a variety of music streaming services and Internet radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or the stereo sound mode. •• To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. Top of the Soundbar Mobile device The initial connection 1. Press the (Source) button on the top of the Soundbar or on the remote control to select “WIFI” mode.
3. Launch the app, and then follow the instructions on the screen to register (add) your Soundbar in the app. •• The automatic pop-up (the third illustration below) may not be available on some mobile devices. If this is the case, select and complete “Add device” from the app menu. Your Soundbar is now added to the app.
07 CONNECTING AN AMAZON PRODUCT •• This feature may not be available in some countries. •• This service is provided by Amazon and can be terminated at any time. Samsung does not assume responsibility for service availability. •• Amazon Alexa app screen is subject to change without prior notice. Connect and use with an Amazon product (Amazon Echo) Use an Amazon Echo product to control your Soundbar and enjoy music services provided by Amazon Echo. NOTE •• Confirm that the Soundbar is connected to Wi-Fi.
2. In the Alexa app, search “Samsung Wireless Audio” in Skills, and then select “ENABLE”. •• Skip this step if you have Skills set up already.
Use voice commands to control the Soundbar •• The Amazon Echo service you can use with your Soundbar is limited to music. Other services provided by Amazon Echo, such as news and weather, can only be accessed through your Amazon Echo product. Trigger + Command + Speaker name Use the Speaker name you changed in the SmartThings app.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Mute VOL WOOFER SOUND MODE PAIR SOUND MODE You can select the desired sound mode by choosing STANDARD, SURROUND, GAME PRO, or ADAPTIVE SOUND. SOUND MODE Select the STANDARD mode if you want to enjoy the original sound.
Press the p button to pause a music file temporarily. When you press the button again, the music file plays. Play / Pause (BT/Wi-Fi) PAIR Press the indicated areas to select Up/Down/Left/Right. SOUND MODE Up/Down/ PAIR Left/Right SOUND MODE VOL VOL WOOFER WOOFER Press Up/Down/Left/Right on the button to select or set functions. •• Music Skip Press the Right button to select the next music file. Press the Left button to select the previous music file.
You can select TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP LEVEL, REAR LEVEL, and VIRTUAL ON/OFF. –– To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Sound Control Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. –– Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER TV remote control On/Off (Standby) page 30 Left Auto Power Link ON/OFF page 28 Right Anynet+ ON/OFF page 28 Up ID SET page 28 7 Band EQ page 29 Initialize (Standby) page 29 (Sound Control) Output specifications for the different sound effect modes Output Effect STANDARD SURROUND GAME PRO ADAPTIVE SOUND Input With Subwoofer Only With Subwoofer & Wireles
09 INSTALLING THE WALL MOUNT Wallmount Components Installation Precautions Wall Mount Guide •• Install on a vertical wall only. x2 x2 •• Do not install in a place with high (M4 x L10) temperature or humidity. •• Verify whether the wall is strong enough to Holder-Screw support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 INSTALLING THE SOUNDBAR ABOVE A TV STAND Component 8. Slide the Soundbar down as shown below so x4 that the Bracket-Wall Mounts rest securely on the Holder-Screws. Rubber-Foot •• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
11 SOFTWARE UPDATE When the Soundbar is connected to the Internet, software updates automatically occur even when the Soundbar is turned off. •• To use the Auto Update function, the Soundbar must be connected to the Internet. The Wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is disconnected or the power is cut off. If the power is cut off, when the power comes back on or you reconnect the power cord, turn on the Soundbar, and then reconnect it to the Internet.
12 TROUBLESHOOTING Before seeking assistance, check the following. The red LED on the subwoofer blinks and the subwoofer is not producing sound. The unit will not turn on. Is the power cord plugged into the outlet? This issue can occur if the subwoofer is not ;; Connect the power plug to the outlet. connected to the Soundbar main unit. A function does not work when the button is pressed. ;; Try to connect your subwoofer again.
13 LICENSE ;; Connected via Wi-Fi 1. Check if the TV is a compatible model. •• Only Samsung Smart TVs released after 2013 are supported. 2. Check if the TV is connected to Wi-Fi. •• If the TV is not connected to Wi-Fi, use the network menu on the TV to Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, establish a connection. (See the TV Dolby Digital Plus, Pro Logic, and the double-D user manual.) symbol are trademarks of Dolby Laboratories. 3.
14 OPEN SOURCE LICENSE NOTICE For further information on Open Sources used in this product, please visit the website: http://opensource.samsung.com 15 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-Q80R Weight 19.4 lbs (8.8 kg) 48.3 x 3.3 x 5.4 inches Dimensions (W x H x D) (1226.0 x 83.0 x 136.0 mm) Operating Temperature Range +41°F to +95°F (+5°C to +35°C) Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power 18W x 10 + 10W x 3, 4ohm LPCM 8ch, Dolby Digital, Supported play formats Dolby Atmos (True HD / Digital Plus), DTS:X Subwoofer Name PS-WR75B Weight 21.6 lbs (9.8 kg) 8.1 x 15.9 x 15.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
© 2019 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Country Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.
