Owner's Manual

Disconnecting the Soundbarfrom the TV
Press the cgj] (Source) button on the top panel or on the remote control and switch to any mode but "B T".
• Disconnecting takes time because the TV must receive a response from the Sound bar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Sound bar and TV, press the
► II (Play/Pause) button on the remote control for 5 seconds with the Sound bar in " BT READY " status.
(Toggle On ➔ Off)
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Sound bar.
• BT PAIRING : In this mode, you can connect a new device to the Sound bar. (Press the* PAIR button
on the remote control or press and hold the cgj] (Source) button on the top of the Sound bar for
more than 5 seconds while the Sound bar is in " BT " mode.)
NOTES
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft (10 m).
• T.he Sound bar automatically turns off after 18 minutes in the Ready state.
• The Sound bar may not perform Bluetooth search or connection correctly under the following
circumstances:
- If there is a strong electrical field around the Soundbar.
- If several Bluetooth devices are simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound bar main unit - e.g., microwaves, wireless LAN devices, etc.
ENG -12