Owner's Manual
Table Of Contents
- User Manual
- Safety Information
- Precautions
- About this Manual
- Contents
- Checking the Components
- Product Overview
- Connecting the Soundbar
- Connecting to your TV
- Connecting an External Device
- Connecting a Mobile Device
- Using the Remote Control
- Installing the Wall Mount
- Installing the Soundbar Above a TV Stand
- Software Update
- Troubleshooting
- License
- Open Source License Note
- Important Notes about Service
- Specs & Guide
- Warranty
- Full Manual
- 01 Checking the Components
- 02 Product Overview
- 03 Connecting the Soundbar
- 04 Connecting to your TV
- 05 Connecting an External Device
- 06 Connecting a Mobile Device
- 07 Connecting an Amazon product
- 08 Using the Remote Control
- 09 Installing the Wall Mount
- 10 Installing the Soundbar above a TV Stand
- 11 Software Update
- 12 Troubleshooting
- 13 License
- 14 Open Source License Notice
- 15 Important Notes About Service
- 16 Specifications and Guide
- Template
ENG - 34
7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
8. Slide the Soundbar down as shown below so
that the Bracket-Wall Mounts rest securely
on the Holder-Screws.
• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Mounts, and then slide the Bracket-Wall
Mounts down so that the Bracket-Wall
Mounts rest securely on the
Holder-Screws.
10 INSTALLING THE
SOUNDBAR
ABOVE A TV
STAND
Component
x 4
Rubber-Foot
You can install the Soundbar above TV stands
that are less than 3 inches (7.6 cm) in height. To
install, attach the Rubber-Feet to the bottom of
the Soundbar before placing it in position above
the TV stand. Make sure you attach the Rubber-
Feet so that they are beyond the outside edges of
the TV stand. Refer to the gure below.
Rubber-Foot