Upgrade guide

Step2. How to upgrade the Firmware by USB
(For HW-S60T/S61T/S67T)
1. Turn on the Soundbar and insert the USB drive into the SERVICE
port located on the bottom of the Main Unit. The software will begin to
update automatically in less than one minute.
2. The update sequence as below table.(It would take around 3 minutes)
3. After update, product will power off automatically.
※ When there are more than one function blocks to be updated(B/E,Micom,etc),
the updates for each function blocks will be executed sequentially after reboot
so it may reboot multiple times.
※ Important
. Please DO NOT turn off the power or remove the USB while the update.