FULL MANUAL HW-T550 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). •• To prevent injury, this apparatus must be NO USER-SERVICEABLE PARTS ARE INSIDE. securely attached to the floor/wall in REFER SERVICING TO QUALIFIED SERVICE accordance with the installation instructions. PERSONNEL.
Radiation Exposure Statement 10. Protect the power cord from being walked This equipment complies with IC RSS-102 on or pinched particularly at plugs, radiation exposure limits set forth for an convenience receptacles, and the point uncontrolled environment. This equipment should be installed and operated with minimum distance where they exit from the apparatus. 11. Only use attachments/accessories specified 20 cm between the radiator & your body. by the manufacturer. 12.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Front Panel / Top Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– M
07 Connecting a Mobile Device Connecting via Bluetooth 08 09 10 17 -------------------------- 17 Using the Remote Control 21 How to Use the Remote Control -------------------------- 21 Adjusting the Soundbar volume with a TV remote control -------------------------- 24 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 25 Output specifications for the different sound effect modes -------------------------- 25 Installing the Wall Mount 26 Installation
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit Subwoofer Remote Control / Batteries AC/DC Adapter (Soundbar) Optical Cable x2 Power Cord (Subwoofer, Soundbar) x2 Wall Mount Guide Holder-Screw x2 Screw x2 Bracket-Wall Mount •• For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes. -/+ (Volume) Button Adjusts the volume.
Bottom Panel of the Soundbar HDMI DIGITAL AUDIO IN (OPTICAL) HDMI IN USB (5V 0.5A) AUX IN HDMI TO TV (ARC) DC 24V HDMI OUT (TV-ARC) DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DC 24V HDMI HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device. USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Soundbar. 3. Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times. •• If you use a device that uses the same frequency (5.
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-8500S user manual.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
Connecting a TV using an HDMI Cable Connect to the HDMI IN (ARC) port of your TV. HDMI Cable (not supplied) Bottom of the Soundbar HDMI TO TV (ARC) HDMI IN (ARC) Connect to the HDMI TO TV (ARC) port of the Soundbar main unit. Top of the Soundbar TV ARC 1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure. 2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Connecting using an Optical Cable BD / DVD player / Set-top box / Bottom of the Soundbar Game console DIGITAL AUDIO IN (OPTICAL) Optical Cable OPTICAL OUT Top of the Soundbar USB (5V 0.5A) D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable. 2.
Connecting using an HDMI Cable Top of the Soundbar External Device HDMI HDMI HDMI OUT HDMI Cable (not supplied) HDMI TO TV (ARC) Bottom of the Soundbar HDMI IN (ARC) HDMI Cable (not supplied) 1. Connect an HDMI cable (not supplied) from the HDMI jack on the back of the product to the HDMI OUT jack on your digital device. 2. Connect an HDMI cable (not supplied) from the HDMI TO TV (ARC) jack on the back of the product to the HDMI IN jack on your TV. 3.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DC 24V HDMI HDMI TO TV (ARC) HDMI IN USB USB (5V 0.5A) 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• The connection is limited to one TV or two Bluetooth devices at the same time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
Bluetooth Multi connection The Soundbar can be connected to 2 Bluetooth devices at the same time. Bluetooth device A Bluetooth device B 1. Connect the Soundbar to up to two Bluetooth devices. (See page 17) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. To play music from the Bluetooth device “B” while playing from the device “A”, pause or stop playback on the device “A” and then start playing on the device “B”.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. SOUND MODE PAIR Mute SOUND MODE You can select the desired sound effect by SOUND MODE SOUND MODE VOL WOOFER –– STANDARD Outputs the original sound. –– SURROUND SOUND PAIR Provides a wider sound field than standard.
•• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) •• Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.
•• Volume Restriction function To protect your hearing, the Volume Restriction function restricts the volume to 20 if you turn on the Soundbar when the volume is set higher than 20. –– The default value for the Volume Restriction function is Off. You must turn it on to activate it. –– When turned on, the Volume Restriction function stays on even when the power is turned off. –– To turn Volume Restriction on or off, press and hold the Down button on the remote control for 5 seconds.
Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your 5 Sec manual.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 24 Left TV Auto connect On/Off (BT Ready) page 13 Up ID SET (Standby) page 22 Down Volume Restriction On/Off (Standby) page 23 7 Band EQ page 23 DRC ON/OFF (Standby) page 22 Bluetooth Power page 22 (Sound Control) SOUND MODE Output specifications for the different sound effect modes Output Effect STANDARD Blueto
09 INSTALLING THE WALL MOUNT Wallmount Components Wall Mount Guide Installation Precautions x2 •• Install on a vertical wall only. •• Do not install in a place with high x2 Holder-Screw temperature or humidity. •• Verify whether the wall is strong enough to Screw x2 support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 SOFTWARE UPDATE Samsung may offer updates for the Soundbar’s system firmware in the future. USB port DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) HDMI HDMI TO TV (ARC) HDMI IN USB (5V 0.5A) 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
Update Procedure If UPDATE is not displayed Important: The updating function erases all user 1. Turn off the Soundbar, disconnect and then settings. We recommend you write down your reconnect the USB storage device that settings so that you can easily reset them after contains the update files to the Soundbar’s the update. Note that updating the firmware USB port. resets the subwoofer connection too. 2. Disconnect the Soundbar’s power cord, 1.
11 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. The remote control does not work. Is the power cord firmly plugged into the wall Are the batteries drained? outlet and power adapter? ;; Replace with new batteries. ;; Unplug and reconnect the power cord to Is the distance between the remote control and the wall outlet and the power adapter to Soundbar main unit too far? make sure the connection is secure.
12 LICENSE 13 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email Manufactured under license from Dolby (oss.request@samsung.com). Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby 14 IMPORTANT NOTES ABOUT SERVICE Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
15 SPECIFICATIONS AND GUIDE Specifications Model Name HW-T550 USB 5V/0.5A Weight 4.6 lbs (2.1 kg) 33.9 x 2.2 x 3.3 inches Dimensions (W x H x D) 860.0 x 55.0 x 85.0 mm Operating Temperature Range +41°F to +95°F (0°C to +45°C) Operating Humidity Range 10 % ~ 75 % AMPLIFIER 160W(40Wx4) Rated Output power Supported play formats (DTS 2.0 and DTS Virtual:X sound is played in LPCM 2ch, Dolby Audio™ (supporting Dolby® Digital), DTS DTS format.) Subwoofer Name PS-WR55D Weight 11.0 lbs (5.0 kg) 7.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
© 2020 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. HEADQUARTERS Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca/support Area Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.
MANUEL COMPLET HW-T550 Imaginez les possibilités Merci d’avoir choisi un appareil Samsung. Pour recevoir une assistance plus complète, veuillez enregistrer votre produit sur www.samsung.
INFORMATIONS RELATIVES À LA SÉCURITÉ AVERTISSEMENTS AVERTISSEMENT •• Afin de diminuer les risques d’incendie ou de POUR ÉVITER LES RISQUES DE CHOC choc électrique, n’exposez pas cet appareil à ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT. la pluie ou à l’humidité. L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR. S’ADRESSER À •• Pour éviter des blessures, cet appareil doit être solidement fixé au plancher/au mur UN SERVICE APRÈS-VENTE QUALIFIÉ. conformément aux directives d’installation.
Declaration d’exposition aux radiations: 10. Placez le cordon d’alimentation de sorte qu’il Cet equipement est conforme aux limites ne puisse être ni piétiné ni pincé, d’exposition aux rayonnements IC RSS-102 particulièrement au niveau de la fiche, de la etablies pour un environnement non controle. prise de courant et du point de sortie de Cet equipement doit etre installe et utilise avec l’appareil. un minimum de 20 cm de distance entre la source 11.
PRÉCAUTIONS 5. Les piles utilisées dans ce produit peuvent contenir des produits chimiques dangereux pour l’environnement. Ne jetez pas les piles 1. Assurez-vous que le bloc d’alimentation CA chez vous est conforme aux exigences de puissance figurant sur la plaque d’identification située à l’arrière de votre produit. Installez votre produit horizontalement, sur un socle approprié (meuble), en laissant un espace suffisant pour la ventilation sur le pourtour 3~4 po.
À PROPOS DE CE MANUEL Le manuel utilisateur se compose de deux éléments : la version papier simplifiée du MANUEL D’UTILISATEUR et un MANUEL COMPLET détaillé que vous pouvez télécharger. MANUEL D’UTILISATEUR Consultez ce manuel pour obtenir des instructions relatives à la sécurité, ainsi que des informations sur l’installation du produit, les composants, les connexions et les caractéristiques du produit.
SOMMAIRE 01 Vérification des Composants Insertion des piles avant d’utiliser la télécommande (2 piles AA) 02 03 04 05 06 2 -------------------------- Présentation du Produit 2 3 Panneau avant/Panneau supérieur du Soundbar -------------------------- 3 Partie inférieure du panneau du Soundbar -------------------------- 4 Branchement du Soundbar 5 Branchement de l’alimentation -------------------------- 5 Raccordement du Soundbar au caisson de basses –– Raccordement automatique du caisson
07 Branchement d’un Appareil Mobile Connexion par Bluetooth 08 17 -------------------------- 17 Utlisation de la Télécommande Procédure d’utilisation de la télécommande 21 -------------------------- 21 Réglage du volume du Soundbar à l’aide d’une télécommande de téléviseur -------------------------- 24 09 10 Utilisation des boutons masqués (boutons ayant plusieurs fonctions) -------------------------- 25 Caractéristiques de sortie pour les différents modes d’effets sonores ----------------------
01 VÉRIFICATION DES COMPOSANTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Unité principale du Soundbar Caisson de basses Télécommande/Piles Adaptateur CA/CC (Soundbar) Câble optique x2 Cordon d’alimentation (Caisson de basses, Soundbar) x2 Guide de montage mural Vis de support x2 Vis x2 Support mural •• Pour obtenir de l’information sur la source d’alimentation et la consommation électrique, veuillez vous reporter à l’étiquette apposée sur le produit.
02 PRÉSENTATION DU PRODUIT Panneau avant/Panneau supérieur du Soundbar Placez le produit de sorte que le logo SAMSUNG soit situé sur le dessus. Panneau supérieur Affichage Affiche le statut et le mode actuel du produit. Bouton (Alimentation) Permet d'allumer et d'éteindre l'appareil. •• Fonction Auto Power Down L’unité se met automatiquement hors tension dans les situations suivantes. –– Mode D.IN / HDMI / BT / USB: si, pendant 20 minutes, aucun signal audio n’est émis.
Partie inférieure du panneau du Soundbar HDMI DIGITAL AUDIO IN (OPTICAL) HDMI IN USB (5V 0.5A) AUX IN HDMI TO TV (ARC) USB (5V 0.5A) DC 24V HDMI OUT (TV-ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) HDMI HDMI TO TV (ARC) DIGITAL AUDIO IN (OPTICAL) Se branche à la sortie numérique (optique) d'un périphérique externe. USB (5V 0.5A) Se branche à un périphérique USB pour lire des morceaux de ce périphérique via le Soundbar.
03 BRANCHEMENT DU SOUNDBAR Branchement de l’alimentation Utilisez les composants d’alimentation afin de brancher le caisson de basses et le Soundbar dans une prise électrique dans l’ordre suivant : 1. Raccordez le cordon d’alimentation au caisson de basses. 2. Branchez le câble d’alimentation de sortie dans l’adaptateur d’alimentation puis dans le Soundbar. 3. Raccordez le cordon d'alimentation à une prise murale. Reportez-vous aux illustrations ci-dessous.
Raccordement du Soundbar au caisson de basses Une fois le caisson des basses raccordé, profitez de basses exceptionnelles. Raccordement automatique du caisson des basses et du Soundbar Lorsque vous allumez le produit après avoir branché les câbles d’alimentation sur le Soundbar et le caisson des basses, ce dernier est automatiquement raccordé au Soundbar. •• Une fois l’appariement automatique terminé, les voyants bleus à l’arrière du caisson des basses s’allument.
Connexion manuelle du caisson des basses en cas d’échec de la connexion automatique Avant d’effectuer la procédure de connexion manuelle ci-dessous : •• Vérifiez que les câbles d’alimentation sont correctement branchés sur le Soundbar et le caisson des basses. •• Assurez-vous que le Soundbar est allumé. 1. Appuyez sur le bouton ID SET situé à l’arrière du caisson des basses et maintenez-le appuyé pendant au moins 5 secondes.
REMARQUES •• Ne branchez pas le cordon d’alimentation de ce produit ou de votre téléviseur à une prise murale tant que tous les composants ne sont pas connectés. •• Avant de déplacer ou d’installer ce produit, veillez à couper l’alimentation et à débrancher le cordon d’alimentation. •• Si l’unité principale est mise hors tension, le caisson des basses sans fil passe en mode veille, et la DEL de STANDBY à l’arrière devient rouge après avoir clignoté en bleu plusieurs fois.
2. Vérifiez le statut de veille du module récepteur sans fil après l’avoir branché dans une prise électrique. •• Le voyant LED LINK (voyant bleu) du module récepteur sans fil clignote. Si le voyant ne clignote pas, appuyez sur le bouton ID SET à l’arrière du module de réception sans fil à l’aide de la pointe d’un stylo pendant 5 à 6 secondes, jusqu’à ce que le voyant LED LINK clignote (en bleu). Pour plus d’information sur le voyant LED, veuillez consulter le manuel utilisateur SWA-8500S.
04 BRANCHEMENT À VOTRE TÉLÉVISEUR Diffusez le son de votre téléviseur par le Soundbar à l’aide de connexion filaires ou sans fil. •• Lorsque le Soundbar est connecté à un téléviseur Samsung sélectionné, il peut être contrôlé à l’aide de la télécommande du téléviseur. –– Cette fonction est prise en charge par les téléviseurs Samsung Smart sortis en 2017 ou après et qui prennent en charge le Bluetooth lors de la connexion du Soundbar au téléviseur à l’aide d’un câble optique.
Branchement d’un téléviseur à l’aide d’un câble HDMI Vérification du port HDMI IN (ARC) de votre téléviseur. Câble HDMI Partie inférieure du panneau (non fourni) du Soundbar HDMI TO TV (ARC) HDMI IN (ARC) Vérifiez le port HDMI TO TV (ARC) sur l'unité principale du Soundbar. Dessus du Soundbar TV ARC 1. Allumez le Soundbar et le téléviseur, puis branchez le câble HDMI (non fourni) comme indiqué sur l’image. 2.
Méthode 2. Connexion sans fil Connexion d’un téléviseur par Bluetooth Lorsqu’un téléviseur est connecté par Bluetooth, vous pouvez profiter du son stéréo sans vous encombrer avec des câbles. •• Un seul téléviseur peut être connecté à la fois. PAIR OU ND SOUODE M Connexion initiale 1. Appuyez sur le bouton PAIR de la télécommande pour accéder au mode «BT PAIRING». (OU) a. Appuyez sur le bouton (Source) du panneau supérieur, puis sélectionnez «BT».
Déconnexion du Soundbar du téléviseur Appuyez sur le bouton (Source) du panneau supérieur ou de la télécommande, puis sélectionnez n’importe quel mode sauf «BT». •• La déconnexion prend du temps car le téléviseur doit recevoir une réponse du Soundbar. (Le temps requis peut différer en fonction du modèle du téléviseur.) •• Pour annuler la connexion Bluetooth automatique entre le Soundbar et le téléviseur, appuyez sur la touche Gauche de la télécommande pendant 5 secondes en mode «BT READY».
05 BRANCHEMENT D’UN PÉRIPHÉRIQUE EXTERNE Connectez un périphérique externe via une connexion filaire ou Bluetooth pour lire le son du périphérique externe via le Soundbar. Branchement à l’aide d’un câble optique Partie inférieure du panneau du Lecteur BD/DVD / Décodeur / Soundbar Console de jeu DIGITAL AUDIO IN (OPTICAL) Câble optique OPTICAL OUT Dessus du Soundbar USB (5V 0.5A) D.IN 1.
Branchement à l’aide d’un câble HDMI Dessus du Soundbar HDMI Périphérique externe HDMI OUT Câble HDMI (non fourni) HDMI HDMI TO TV (ARC) Partie inférieure du panneau HDMI IN (ARC) du Soundbar Câble HDMI (non fourni) 1. Branchez un câble HDMI (non fourni) entre le connecteur HDMI situé à l’arrière du produit et le connecteur HDMI OUT de votre périphérique numérique. 2.
06 CONNEXION À UN PÉRIPHÉRIQUE DE STOCKAGE USB Vous pouvez diffuser des morceaux se trouvant sur des périphériques de stockage à l’aide du Soundbar. Port USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DC 24V HDMI HDMI TO TV (ARC) HDMI IN USB USB (5V 0.5A) 1. Connectez le périphérique USB au port USB situé en bas du produit. 2. Appuyez sur le bouton (Source) du panneau supérieur ou de la télécommande, puis sélectionnez «USB». 3. «USB» apparaît sur l’écran d’affichage. 4.
07 BRANCHEMENT D’UN APPAREIL MOBILE Connexion par Bluetooth Lorsqu’un appareil mobile est connecté par Bluetooth, vous pouvez profiter du son stéréo sans vous encombrer avec des câbles. •• La connexion est limitée à un téléviseur ou à deux appareils Bluetooth simultanément. PAIR OU Périphérique Bluetooth ND SOUODE M Connexion initiale 1. Appuyez sur le bouton PAIR de la télécommande pour accéder au mode «BT PAIRING». (OU) a.
Quelle est la différence entre BT READY et BT PAIRING ? •• BT READY : Dans ce mode, vous pouvez rechercher les téléviseurs connectés précédemment ou brancher un appareil mobile précédemment connecté dans le Soundbar. •• BT PAIRING : Dans ce mode, vous pouvez connecter un nouvel appareil au Soundbar. (Appuyez sur la touche PAIR de la télécommande ou appuyez sur le bouton (Source) situé sur le dessus du Soundbar et maintenez-le enfoncé pendant plus de 5 secondes pendant que le Soundbar est en mode «BT».
Déconnexion d’un périphérique Bluetooth d’un Soundbar Vous pouvez déconnecter le périphérique Bluetooth à partir du système Soundbar. Pour des directives, consultez le manuel d’utilisation du périphérique Bluetooth. •• Le système Soundbar sera déconnecté. •• Lorsque le système Soundbar est déconnecté du périphérique Bluetooth, Soundbar affiche le message «BT DISCONNECTED» sur le panneau avant.
Connexion Bluetooth multiple Le Soundbar peut être connecté à 2 appareils Bluetooth simultanément. Appareil Bluetooth A Appareil Bluetooth B 1. Connectez le Soundbar à deux appareils Bluetooth au maximum (voir page 17). 2. Écoutez de la musique à partir de l’un des appareils Bluetooth connectés pendant que deux appareils sont connectés. 3.
08 UTLISATION DE LA TÉLÉCOMMANDE Procédure d’utilisation de la télécommande Permet d'allumer et d'éteindre le Soundbar. Alimentation PAIR Appuyez sur ce bouton pour sélectionner une source connectée au Soundbar. Source Mise en sourdine SOUND MODE WOOFER PAIR SOUND MODE SOUND MODE SOUND MODE VOL Appuyez sur la touche (Mise en sourdine) pour désactiver le son. Appuyez de nouveau sur PAIR la touche pour activer le son.
•• DRC (Dynamic Range Control) Vous permet d’appliquer la commande de portée dynamique aux pistes Dolby Digital. Maintenez la touche SOUND MODE enfoncée pendant que le Soundbar est hors tension pour activer ou désactiver la DRC (Dynamic Range Control). Lorsque la fonction DRC est activée, le son fort est réduit. (Le son peut être déformé.
•• Fonction de limitation du volume Pour protéger votre audition, la fonction de limitation du volume limite le volume à 20 si vous allumez le Soundbar alors le volume est réglé sur une valeur supérieure à 20. –– Par défaut, la fonction de limitation du volume est désactivée. Vous devez l’activer pour l’utiliser. –– Une fois activée, la fonction de limitation du volume reste active même lorsque l’appareil est mis hors tension.
Réglage du volume du Soundbar à l’aide d’une télécommande de téléviseur 4. Si vous souhaitez retourner au mode par défaut du Soundbar (contrôlé par une télécommande de téléviseur Samsung), Si vous avez un téléviseur Samsung, vous pouvez régler son volume à l’aide de la télécommande infrarouge fournie avec ce même téléviseur. poussez le bouton WOOFER vers le haut et maintenez-le pendant 5 secondes jusqu’à ce que «SAMSUNG-TV REMOTE» apparaisse sur l’écran. 5 Sec 1. Éteignez le Soundbar. OFF 2.
Utilisation des boutons masqués (boutons ayant plusieurs fonctions) Bouton masqué Page de référence Bouton de la télécommande Fonction WOOFER (Haut) Activer/Désactiver la fonction Télécommande de votre téléviseur (mode veille) Activation/Désactivation de la connexion automatique Gauche du téléviseur (BT Prêt) page 24 page 13 Haut ID SET (mode veille) page 22 Bas Activer/Désactiver limitation du volume (mode veille) page 23 EQ 7 bandes page 23 DRC ON/OFF (mode veille) page 22 Bluetooth Pow
09 INSTALLATION DU SUPPORT MURAL Composantes murales Guide de montage mural x2 Précautions d’installation x2 Vis de support •• Effectuez l’installation sur un mur vertical uniquement. Vis x2 •• N’installez pas le produit dans un endroit où la température ou l’humidité sont élevées. •• Vérifiez si le mur est suffisamment solide Support mural pour supporter le poids du produit. Sinon, renforcez le mur ou choisissez un autre endroit pour l’installation. 1.
2. Alignez la Ligne Centrale du Guide de 5. Poussez une vis (non fournie) dans chaque montage mural sur le centre de votre Vis de support, puis vissez fermement téléviseur (si vous montez le Soundbar sous chaque vis dans un trou de vis de support. ce dernier), puis fixez le Guide de montage mural au mur avec du ruban adhésif. •• Si vous ne l’installez pas sous un téléviseur, placez la Ligne Centrale au centre de la zone d’installation. 6.
7. Installez le Soundbar à l’aide des Support de fixation murale en accrochant ces derniers sur les Vis de support fixées au mur. 10 MISE À JOUR LOGICIELLE Il se peut que Samsung propose ultérieurement des mises à jour pour le micrologiciel du système du Soundbar. Port USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) 8. Faites glisser la Soundbar vers le bas, comme DC 24V HDMI HDMI TO TV (ARC) HDMI IN USB (5V 0.
Procédure de mise à jour Si UPDATE ne s’affiche pas Important : la fonction de mise à jour efface tous les paramètres utilisateur. Nous vous recommandons de noter vos paramètres afin de pouvoir les redéfinir facilement après la mise à jour. Notez que la mise à jour du logiciel réinitialise également la connexion au caisson de basses. 1. Éteignez le Soundbar, débranchez le périphérique de stockage qui contient les fichiers de mise à jour du port USB du Soundbar, puis rebranchez-le. 2.
11 DÉPANNAGE Avant de contacter l’assistance, effectuez les vérifications suivantes. L’unité ne s’allume pas. La télécommande ne fonctionne pas. Le cordon d’alimentation est-il correctement Les piles sont-elles déchargées? branché sur la prise murale et l’adaptateur ;; Remplacez-les par de nouvelles piles.
12 LICENCE 13 AVIS DE LICENCES LIBRES Pour transmettre des demandes et des questions portant sur les sources ouvertes, communiquez Manufactured under license from Dolby avec Samsung par courriel Laboratories. Dolby, Dolby Audio, and the (oss.request@samsung.com). double-D symbol are trademarks of Dolby Laboratories. 14 REMARQUE IMPORTANTE CONCERNANT LE SERVICE For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
15 CARACTÉRISTIQUES ET GUIDE Spécifications Nom de modèle HW-T550 USB 5V/0,5A Poids 4,6 lbs (2,1 kg) 33,9 x 2,2 x 3,3 po Dimensions (L x H x P) (860,0 x 55,0 x 85,0 mm) Plage de températures en fonctionnement +41°F à +95°F (0°C à +45°C) Plage d’humidité en fonctionnement 10 % à 75 % AMPLIFICATEUR 160W(40Wx4) Puissance de sortie nominale Formats de lecture pris en charge (Le son DTS 2.0 et DTS Virtual:X est lu au LPCM 2ch, Dolby Audio™ (supporting Dolby® Digital), DTS format DTS.
GARANTIE LIMITÉE À L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication. SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA.
© 2020 Samsung Electronics Co., Ltd. Tous droits réservés. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. SIÈGE SOCIAL Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada TEL: 1-800-SAMSUNG (1-800-726-7864) www.samsung.com/ca_fr/support Area Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) www.samsung.