HW-H750 HW-H751 User manual Wireless Audio - Soundbar Imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.
FEATURES FEATURES TV SoundConnect TV SoundConnect lets you listen to audio from your TV on your Soundbar via a Bluetooth connection and lets you control the sound. HDMI HDMI transmits video and audio signals simultaneously, and provides a clearer picture. The unit is also equipped with the ARC function which lets you listen to sound from your TV through the Soundbar via an HDMI cable. This function is only available if you connect the unit to an ARC compliant TV.
SAFETY INFORMATION SAFETY INFORMATION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates important instructions accompanying the product.
SAFETY INFORMATION PRECAUTIONS 68.6 mm 99.1mm 99.1mm 99.1mm Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation 7~10 cm. Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
CONTENTS CONTENTS ENG 2 FEATURES 17 FUNCTIONS 2 Licenses 17 Input Mode 17 ARC (HDMI OUT) 3 SAFETY INFORMATION 18 Bluetooth 3 Safety Warnings 20 NFC 4 Precautions 21 TV SoundConnect 22 USB 6 GETTING STARTED 23 Using the Network Standby On function 6 Before reading the User’s Manual 23 Using the AUTO POWER LINK Function 6 What’s Included 24 Using the Multiroom Link 26 Software update 7 DESCRIPTIONS 7 Front/Bottom Panel 8 Rear Panel 9 REMOTE CONTROL 9 Remote Cont
GETTING STARTED GETTING STARTED BEFORE READING THE USER’S MANUAL Note the following terms before reading the user manual. + Icons used in this manual Icon Term Definition Caution Indicates a situation where a function does not operate or settings may be canceled. Note Indicates tips or instructions on the page that help you operate a function. + Safety Instructions and Troubleshooting 1) Be sure to familiarise yourself with the Safety Instructions before using this product.
DESCRIPTIONS DESCRIPTIONS ENG FRONT/BOTTOM PANEL AUX IN (Function) Button Connect to the Analogue output of an external device. Selects the D.IN, AUX, HDMI, BT, TV, USB input. ● While the unit is powered on, pressing the ( ) button for more than 3 seconds sets the button to act as MUTE button. To cancel MUTE button ) button for more than setup, press the ( 3 seconds again. (USB Port) Connect USB devices such as MP3 players here to play files on the devices.
DESCRIPTIONS REAR PANEL WPS/Wi-Fi SETUP Button Press this button to connect your Soundbar to your network using WPS or Wi-Fi setup. DC 24V (Power Supply In) Connect the DC power adaptor to the power supply jack, and then connect the AC power adaptor plug to a wall outlet. SPK ADD Button Press the button to connect Soundbar to the HUB. (not supplied) LAN Lets you connect to a network using a LAN cable. HDMI IN Inputs digital video and audio signals simultaneously using an HDMI cable.
REMOTE CONTROL REMOTE CONTROL SOURCE Press to select a source connected to the Soundbar. MUTE You can turn the volume down to 0 with the push of a button. Press again to restore the sound to the previous volume level. REPEAT Press to set the REPEAT function during music playback from a USB device. REPEAT OFF : Cancels Repeat Playback. REPEAT FILE : Repeatedly play a track. REPEAT ALL : Repeatedly play all tracks. REPEAT RANDOM : Plays tracks in random order.
REMOTE CONTROL POWER Turns the Soundbar on and off. VOLUME Adjusts the volume level of the unit. Skip Back If there is more than one file on the device you are playing, and you press the # button, the previous file is selected. Play/Pause Press the ► button to pause playing the file temporarily. Press the ► button again to play the selected file. SOUND EFFECT Press to select a sound effect mode. Select the STANDARD mode if you want to enjoy the original sound.
CONNECTIONS CONNECTIONS ENG INSTALLING THE WALL MOUNT You can use the wall mount bracket to mount this unit on a wall. + Installation Precautions ● Install on a vertical wall only. ● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set. ● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.
CONNECTIONS DETACHING THE WALL MOUNT 1. Pull the Soundbar upwards as shown in the figure to separate it from the wall mount. Using the Soundbar with Wall Mount [Detaching the Soundbar from the Wall Mount] ● Do not hang onto the installed unit and avoid striking or dropping the unit. ● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.
CONNECTIONS CONNECTING THE WIRELESS SUBWOOFER 1. Plug the power cords of the main unit and subwoofer into an AC wall outlet. 2. Confirm that the main unit is off (in STANDBY Mode). 3. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds. • The LINK indicator (Blue LED) on the subwoofer blinks quickly. 4. While the main unit is powered off (in STANDBY ) on the mode), press and hold the MUTE ( remote control for 5 seconds. 5.
CONNECTIONS ATTACHING THE TOROIDAL FERRITE CORE TO THE SUBWOOFER POWER CORD AND SOUNDBAR POWER CORD You can reduce noise caused by electromagnetic radiation by fitting the ferrite core to the your subwoofer power cord and Soundbar power cord. 1. Unlock and open the ferrite core. 2. Wind the Subwoofer power cable and Soundbar power cable around the ferrite core twice. (Start winding 5 to 10 cm away from the core). 3. Close the ferrite core by pressing it until it it clicks.
CONNECTIONS CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE HDMI IN HDMI OUT HDMI Cable (not supplied) Digital Devices HDMI IN HDMI OUT (TV) HDMI Cable (not supplied) HDMI IN Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. ARC (HDMI OUT) and, It can be enabled only when the Soundbar is connected to a TV that supports the ARC function. The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
CONNECTIONS CONNECTING AN EXTERNAL DEVICE USING OPTICAL (DIGITAL) CABLE OR AUDIO (ANALOGUE) CABLE This unit comes equipped with one optical in digital jack and one audio Analogue in jack, giving you two ways to connect it to a TV. OPTICAL OUT OPTICAL IN Optical Cable (not supplied) BD/ DVD player/ Set-top box/ Game console AUDIO OUT AUX IN Audio Cable OPTICAL IN or, Connect the OPTICAL IN on the main unit to the OPTICAL OUT jack of the TV or Source Device.
FUNCTIONS FUNCTIONS ENG INPUT MODE Press the ( ) button on the main unit’s front panel or the select the mode you want. Input mode Display Optical Digital input D.IN AUX input AUX HDMI input HDMI BLUETOOTH mode BT TV mode TV USB mode USB (SOURCE) button on the remote control to The unit turns off automatically in the following situations: ● D.IN/HDMI/BT/TV/USB/ARC Mode - If there is no audio signal for 15 minutes.
FUNCTIONS BLUETOOTH You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires! + To connect the Soundbar to a Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function. Connect Bluetooth device ) button on the main unit’s front 1. Press the ( (SOURCE) button on the panel or the remote control to select the BT mode. ● If asked for PIN code when connecting a Bluetooth device, enter <0000>.
FUNCTIONS + To disconnect the Bluetooth device from the Soundbar ● The Soundbar will be disconnected. ● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display. + To disconnect the Soundbar from the Bluetooth device Press the (SOURCE) button on the remote control or the ( switch from BT to another mode or turn off the Soundbar.
FUNCTIONS NFC You can connect your Soundbar to an NFC-enabled smart device through a Bluetooth connection with a simple setup. Once connected, you can enjoy music stored in your smart device through the Soundbar. It is supported in some area’s models only. + Connecting with NFC and smart devices 1. Detach the NFC sticker label from the package and attach it to a desired spot. • Putting the NFC sticker within a 3m radius from the unit is recommanded.
FUNCTIONS TV SOUNDCONNECT + Connecting a TV to the Soundbar Connect 1. Turn on the TV and Soundbar. • Set the "Add New Device" menu of the TV to "On". 2. Press the ( ) button on the main unit’s front (SOURCE) button on the panel or the remote control to select the TV mode. 3. On the TV, a message asking whether to enable the TV SoundConnect function. "[Samsung] Soundbar" is displayed on the TV screen. 4. Select to finish connecting the TV and Soundbar by TV remote control.
FUNCTIONS USB You can play music files located on USB storage devices through the Soundbar. USB port Display 1. Connect the USB device to the USB port of the product. ● Do not remove the USB device while it is transferring files. ) button on the main unit’s front 2. Press the ( (SOURCE) button on the panel or the remote control to select the USB mode. ● DRM-protected music files (MP3, WMA) from commercial web sites cannot be played. 3. USB appears on the display screen.
FUNCTIONS USING THE NETWORK STANDBY ON FUNCTION 1. Connect the Smart device to your Soundbar. 2. Turn the Network Standby On function on by pressing the $ button on the Soundbar remote for more than 5 seconds. You can turn the function off by pressing the $ button again for more than 5 seconds. ● Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device and the Soundbar must have been previously paired at least once.
FUNCTIONS USING THE MULTIROOM LINK Once the Soundbar is connected to a smart device with Multiroom Link App, you can connect multiple Samsung Multiroom devices together wirelessly. + Before you begin Communication Basics Smart Device: Android or iOS (App Control) Intrenet Wireless Router 1. Requirements: Wireless Router, Smart Device 2. The wireless router should be connected to the Internet. 3. The smart device should be connected to the router via a Wi-Fi connection.
FUNCTIONS + Connecting with Soundbar Connecting the Soundbar to Your Network with a LAN Cable Plug In LAN Wireless Router 1. Connect your smart device to your Wi-Fi network. 2. On your Smart device, select the Samsung Multiroom app. Setup starts. 3. In the app, select "I don’t have a Hub", and then press Next. On the next screen, select Soundbar from the device type, and then press Next. 4. Select Wired from the network type, and then press Next. 5.
FUNCTIONS SOFTWARE UPDATE ● Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB storage device. ● Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update. ● After reset, all settings are reset to their factory default settings. We recommend you write down your settings so that you can easily reset them after the update.
TROUBLESHOOTING TROUBLESHOOTING ENG Before requesting service, please check the following. The unit will not turn on. Connect the power plug to the outlet. • Is the power cord plugged into the outlet? A function does not work when the button is pressed. Disconnect the power plug and connect it again. • Is there static electricity in the air? Sound is not produced. • Is the Mute function on? Press the Mute button to cancel the function. • Is the volume set to minimum? Adjust the Volume.
APPENDIX APPENDIX SPECIFICATIONS Model name HW-H750, HW-H751 5V/0.5A USB Weight GENERAL Dimensions (W x H x D) Main Unit 3.3 kg Subwoofer (PS-WH750, PS-WH751) 9.8 kg Main Unit 943 x 123 x 57 mm Subwoofer (PS-WH750, PS-WH751) 305.5 x 388.5 x 305.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Country AUSTRIA Contact Centre 0800 - SAMSUNG (0800 7267864) BELGIUM 02-201-24-18 BOSNIA BULGARIA CROATIA CZECH DENMARK FINLAND FRANCE 051 331 999 07001 33 11 , sharing cost 062 726 786 800 - SAMSUNG (800-726786) 70 70 19 70 030-6227 515 01 48 63 00 00 0180 6 SAMSUNG bzw. 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max.