FULL MANUAL HW-M360 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE •• TO PREVENT ELECTRIC SHOCK, MATCH WIDE PERSONNEL. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
PRECAUTIONS 5. The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in 1. Ensure that the AC power supply in your the general household trash. Do not dispose house complies with the power of batteries in a fire. Do not short circuit, requirements listed on the identification disassemble, or overheat the batteries. sticker located on the back of your product.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 -------------------------- Product Overview 2 3 Front Panel / Right Side Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the subwoofer and the Soundbar ––
07 08 09 10 Connecting a Mobile Device 15 Connecting via Bluetooth -------------------------- 15 Using the Samsung Audio Remote App –– Installing the Samsung Audio Remote App –– Launching the Samsung Audio Remote App -------------------------- 18 -------------------------- 18 -------------------------- 18 Using the Remote Control 19 How to Use the Remote Control -------------------------- 19 Adjusting the Soundbar volume with a TV remote control -------------------------- 22 Using the Hidden
01 CHECKING THE COMPONENTS Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 Subwoofer Remote Control / Batteries AC/DC Adapter (Main Unit) Optical Cable 2 Power Cord (Subwoofer) •• The power connection steps are labelled (1, 2). For more information about power connections, see page 5. •• For Soundbar wall mounting components, see page 24. •• Micro USB to USB adapter Cable is sold separately. To purchase, contact a Samsung Service Center or Samsung Customer Care.
02 PRODUCT OVERVIEW Front Panel / Right Side Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Right Side of the Soundbar Display Displays the product’s status and current mode. +/- (Volume) Button Adjusts the volume. •• When adjusted, the volume level appears on the Soundbar’s front display. (Power) Button Turns the power on and off. (Source) Button Selects the source input mode. Input mode Display Optical Digital input D.
Bottom Panel of the Soundbar DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN DC 19V DC 19V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device. USB (5V 0.5A) Connect a USB device here to play music files on the USB device through the Soundbar. AUX IN Connect to the Analog output of an external device. DC 19V (Power Supply In) Connect the AC/DC power adapter.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2) to connect the units to electrical outlets in the following order: 1.) Subwoofer 2.) Soundbar Main Unit. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the top of the subwoofer turn on.
Manually connecting the subwoofer if automatic connection fails Check before performing the manual connection •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the top of the subwoofer turns off and the blue indicator blinks. ID SET 5 Sec ID SET POWER Rear of the Subwoofer Top of the Subwoofer 2. Turn off the Soundbar.
•• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the top will be Red after blinking Blue several times. •• If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. •• The maximum transmission distance of the wireless signal of the main unit is about 10 meters, but may vary depending on your operating environment.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to a selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– When using optical cable, this feature can be supported by 2017 Samsung Smart TVs that support Bluetooth. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
Auto Power Link Auto Power Link automatically turns on the Soundbar when the TV is turned on. 1. Connect the Soundbar and a TV with a digital optical cable. 2. Press the (Source) button on the right side panel or on the remote control, and then select “D.IN”. 3. Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default. (To turn off this function, turn off Auto Power using the Soundbar.
If the device fails to connect •• If the previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Mxxx M-Series”) appears in the list, delete it. •• In “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side panel of the Soundbar or on the remote control to switch to “BT PAIRING” mode. Then, select “[AV] Samsung Soundbar Mxxx M-Series” from the TV’s search list.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an Optical or Analog Audio (AUX) Cable BD / DVD player / Set-top box / Right Side of the Soundbar Game console DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Optical Cable USB (5V 0.
06 CONNECTING A USB You can play music files located on USB storage devices through the Soundbar. USB port DIGITAL AUDIO IN (OPTICAL) Display DC 19V USB (5V 0.5A) AUX IN USB USB (5V 0.5A) Micro USB to USB adapter Cable (not supplied) 1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar. •• Micro USB to USB adapter Cable is sold separately.
File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 16KHz ~ 48KHz 80kbps~320kbps MPEG 1 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2 Layer3 16KHz ~ 48KHz 80kbps~320kbps MPEG 2.5 Layer3 16KHz ~ 48KHz 80kbps~320kbps Wave_Format_MSAudio1 16KHz ~ 48KHz 56kbps~128kbps Wave_Format_MSAudio2 16KHz ~ 48KHz 56kbps~128kbps AAC 16KHz ~ 96KHz 48kbps~320kbps AAC-LC 16KHz ~ 96KHz 128kbps~192kbps 5.1ch 320kbps HE-AAC 24KHz ~ 96KHz 48kbps~64kbps 5.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. Bluetooth device The initial connection 1. Press the (Source) button on the right side panel or on the remote control, and then select “BT”. 2. Change “BT” to “BT PAIRING”.
What are the BT READY and BT PAIRING statuses? •• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device. •• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote control.) NOTES •• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the right side panel or on the remote control, and then change to any mode except “BT”.
Using the Samsung Audio Remote App Installing the Samsung Audio Remote App To control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio Remote app from the Google Play store. Market search : Samsung Audio Remote Launching the Samsung Audio Remote App To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device, and then follow the directions on the screen.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Surround Surround You can select from TREBLE, BASS, or AUDIO SYNC. •• To control the volume of the treble or bass Sound Control sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
Bluetooth POWER Surround SOUND MODE SOUND MODE •• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) WOOFERPress to select a source connected to the Soundbar.
Press the indicated areas to select Up/Down/Left/Right. Up/Down/ Bluetooth POWER Surround Left/Right SOUND MODE Press Up/Down/Left/Right on the button to select or set functions. •• Repeat To use the Repeat function in “USB” mode, press the Up button. VOL WOOFER •• Music Skip Press the Right button to select the next music file. Press the Left button to select the previous music file. •• Auto Power Link You can turn Auto Power Link on or off.
FE R Su rro un d D U N VO L D N SO SO SO U VO L BA R BA R W OO W OO W OO D N U U N VO L D BA R BA R SOUND MODE O SO M UN OD D E Bl u PO eto W oth ER Bl u PO eto W oth ER FE R Su rro un d WOOFER SO M UN OD D E Bl u PO eto W oth ER WOOFER FE R Su rro un d Bluetooth POWER Surround OO W OO BA R D N U SO VO L BA R D N SO U VO L Push the button up or down to adjust the volume. •• Mute Press the VOL button to mute the sound. Press it again to unmute the sound.
Using the Hidden Buttons Hidden Button Reference page Remote Control Button Function Surround TV remote control On/Off page 22 BT Paring page 15 Auto Power Down On/Off (AUX mode) page 20 (Source) p (Play / Pause) Initialize (Standby) page 28 VOL ID SET (Standby) page 7 Left Auto Power Link ON/OFF page 10 7 Band EQ page 19 SOUND MODE DRC ON/OFF (Standby) page 20 Bluetooth POWER Volume restriction On/Off page 21 (Sound Control) Output specifications for the different sound effect
09 INSTALLING THE WALL MOUNT Installation Precautions •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point. •• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.
1. Place the Wall Mount Guide against the wall 3. Push a pen tip or sharpened pencil tip surface. through the center of the B-TYPE images on •• The Wall Mount Guide must be level. each end of the Guide to mark the holes for •• If your TV is mounted on the wall, install the supporting screws, and then remove the the Soundbar at least 5 cm below the TV. Wall Mount Guide. 5 cm or more 4. Using an appropriately sized drill bit, drill a hole in the wall at each marking.
6. Use the two Screws (M4 x L12) to attach both •• The left and right mounts are different shapes. Make sure to position them Bracket-Wall Mount L and R to the correctly. Soundbar’s bottom. For a proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets. Wall Mount R Wall Mount L 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall.
10 SOFTWARE UPDATE Detaching the Soundbar from the Wall 1. To separate the Soundbar from the wall mount, push it in the direction of arrow, tilt it up slightly, and then pull it away from the Samsung may offer updates for the Soundbar’s wall as shown. system firmware in the future. USB port DIGITAL AUDIO IN (OPTICAL) DC 19V USB (5V 0.5A) AUX IN USB (5V 0.5A) Micro USB to USB adapter Cable (not supplied) •• Do not hang onto the installed unit and avoid striking or dropping the unit.
Updating Procedure If UPDATE is not displayed 1. Connect a Micro USB to USB adapter cable 1. Turn off the Soundbar, disconnect and then with a male USB 2.0 Micro USB plug (Type B) reconnect the USB storage device that on one end and a standard female 2.0 USB contains the update files to the Soundbar’s jack (Type A) on the other end to the micro USB port. USB jack on your Soundbar. 2.
11 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ;; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ;; See the Bluetooth connection sections on pages 10 and 15. Sound is not produced.
12 LICENSE 14 IMPORTANT NOTES ABOUT SERVICE Manufactured under license from Dolby Figures and illustrations in this User Manual are Laboratories. Dolby, Dolby Audio, Pro Logic, provided for reference only and may differ from and the double-D symbol are trademarks of actual product appearance. Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.
15 SPECIFICATIONS AND GUIDE Specifications USB Weight GENERAL AMPLIFIER Dimensions (W x H x D) 5V/0.5A Soundbar Main Unit 1.5kg Subwoofer (PS-WM20) 4.6kg Soundbar Main Unit 907.5 x 53.5 x 70.5 mm Subwoofer (PS-WM20) 179.0 x 353.0 x 299.5 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % Rated Output power Soundbar Main Unit 35W x 2, 6 ohm Subwoofer (PS-WM20) 130W, 3 ohm Supported play formats (DTS 2.0 sound is played in DTS format.
INFORMACIÓN DE SEGURIDAD ADVERTENCIAS DE SEGURIDAD PARA REDUCIR EL PELIGRO DE DESCARGA ADVERTENCIA •• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga este aparato a ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE la lluvia ni a lahumedad. TRASERA). PRECAUCIÓN NO CONTIENE ELEMENTOS QUE DEBA REEMPLAZAR EL USUARIO. EN CASO DE AVERÍA, •• PARA EVITAR DESCARGAS ELÉCTRICA S, SOLICITE LA AYUDA DE PERSONAL ESPECIALIZADO. INTRODUZCA TOTALMENTE EL ENCHUFE.
PRECAUCIONES 5. Las pilas utilizadas en este producto contienen productos químicos que son peligrosos para el medio ambiente. No tire las pilas con el resto 1. Asegúrese de que la toma de CA de su casa de la basura doméstica. No deseche las pilas en cumpla con los requisitos indicados en la el fuego. No cortocircuite, desmonte ni pegatina de identificación de la parte sobrecaliente las baterías. Si las pilas se posterior del producto.
ÍNDICE 01 Verificación de los Componentes Colocación de las pilas antes de utilizar el control remoto (2 pilas AA) 02 03 04 05 -------------------------- Descripción del Producto 2 3 Panel frontal/panel lateral derecho de la Soundbar -------------------------- 3 Panel inferior de la Soundbar -------------------------- 4 Conexión de la Soundbar 5 Conexión del suministro eléctrico -------------------------- 5 Conexión de la Soundbar al subwoofer –– Conexión automática entre el subwoofer y
07 08 Conexión de un Dispositivo móvil 15 Conexión vía Bluetooth -------------------------- 15 Uso de la aplicación Samsung Audio Remote –– Instalación de la aplicación Samsung Audio Remote –– Inicio de la aplicación Samsung Audio Remote -------------------------- 18 -------------------------- 18 -------------------------- 18 Uso del Control Remoto 19 Cómo utilizar el control remoto -------------------------- 19 Ajuste del volumen de la Soundbar con el control remoto de un televisor ------------
01 VERIFICACIÓN DE LOS COMPONENTES Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Unidad principal de la Soundbar 1 Subwoofer Control remoto/pilas Adaptador de CA/CC (Unidad principal) Cable óptico 2 Cable de alimentación (Subwoofer) •• Los pasos para realizar la conexión eléctrica están enumerados (1, 2). Para obtener más información sobre las conexiones eléctricas, consulte la página 5.
02 DESCRIPCIÓN DEL PRODUCTO Panel frontal/panel lateral derecho de la Soundbar Coloque el producto de manera que el logotipo de SAMSUNG quede en la parte superior. Lateral derecho de la Soundbar Pantalla Muestra el estado del producto y el modo actual. Botón +/- (Volumen) Permite ajustar el volumen. •• Una vez que haya ajustado el volumen, el nivel de volumen aparecerá en la pantalla frontal de la Soundbar. Botón (Encendido) Permite encender y apagar la Soundbar.
Panel inferior de la Soundbar DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN DC 19V DC 19V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) Permite conectar la Soundbar a la salida digital (óptica) de un dispositivo externo. USB (5V 0.5A) Conecte un dispositivo USB aquí para reproducir archivos de música que se encuentran en el dispositivo USB a través de la Soundbar. AUX IN Permite conectar la Soundbar a la salida analógica de un dispositivo externo.
03 CONEXIÓN DE LA SOUNDBAR Conexión del suministro eléctrico Utilice los componentes de alimentación (1, 2) para conectar las unidades a los tomacorrientes en el siguiente orden: 1.) Subwoofer 2.) Unidad principal de la Soundbar. Consulte las siguientes ilustraciones. •• Para obtener más información sobre el suministro eléctrico y el consumo de energía, consulte la etiqueta del producto.
Conexión de la Soundbar al subwoofer Cuando el subwoofer está conectado, puede disfrutar de sonidos graves potentes. Conexión automática entre el subwoofer y la Soundbar Cuando lo enciende después de conectar los cables de alimentación a la Soundbar y el subwoofer, el subwoofer se conectará automáticamente a la Soundbar. •• Cuando finaliza el emparejamiento automático, los indicadores azules de la parte superior del subwoofer se encienden.
Conexión manual del subwoofer en caso de error en la conexión automática Verifique antes de realizar la conexión manual •• Verifique si los cables de alimentación de la Soundbar y el subwoofer están conectados correctamente. •• Asegúrese de que la Soundbar esté encendida. 1. Mantenga presionado ID SET en la parte posterior del subwoofer durante al menos 5 segundos. El indicador rojo de la parte superior del subwoofer se apaga y el indicador azul parpadea.
•• Si la unidad principal está apagada, el subwoofer inalámbrico pasará a modo de espera y el LED de STANDBY de arriba se verá rojo después de parpadear con una luz azul varias veces. •• Si utiliza cerca de la Soundbar un dispositivo que usa la misma frecuencia (5,8 GHz) que esta, la interferencia puede hacer que se interrumpa el sonido. •• La distancia máxima de transmisión de la señal inalámbrica de la unidad principal es de aproximadamente 10 metros, pero puede variar según su entorno operativo.
04 CONEXIÓN A SU TELEVISOR Escuche el sonido de su televisor desde su Soundbar a través de conexiones por cable o inalámbricas. •• Cuando la Soundbar está conectada a un televisor Samsung seleccionado, esta se puede controlar mediante el control remoto del televisor. –– Cuando utiliza cable óptico, esta función es compatible con los Smart TV Samsung 2017 que admiten Bluetooth.
Auto Power Link La función Auto Power Link enciende automáticamente la Soundbar cuando el televisor está encendido. 1. Conecte la Soundbar y el televisor con un cable óptico digital. 2. Presione el botón (Fuente) en el panel lateral derecho o en el control remoto y luego seleccione el modo“D.IN”. 3. Presione el botón Izquierda del control remoto durante 5 segundos para encender o apagar Auto Power Link. •• La función Auto Power Link está configurada en ON de manera predeterminada.
Si el dispositivo no se conecta •• Si la lista de la Soundbar que se conectó anteriormente (p. ej. “[AV] Samsung Soundbar Mxxx M-Series”) aparece en la lista, bórrela. •• En el modo “BT”, mantenga presionado el botón (Fuente) durante más de 5 segundos en el panel de la derecha de la Soundbar o en el control remoto para cambiar al modo “BT PAIRING”. Luego seleccione “[AV] Samsung Soundbar Mxxx M-Series” en la lista de búsqueda que aparece en la pantalla del televisor.
05 CONEXIÓN DE UN DISPOSITIVO EXTERNO Conéctese a un dispositivo externo a través de una red por cable o inalámbrica para reproducir el sonido de ese dispositivo externo a través de la Soundbar. Conexión con un cable de audio óptico o analógico (AUX) Lateral derecho de la Reproductor de Blu-ray/Reproductor de DVD/ Soundbar Decodificador/Consola de juegos DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Cable óptico USB (5V 0.
06 CONEXIÓN DE UN USB Puede reproducir archivos de música que se encuentran en dispositivos de almacenamiento a través de la Soundbar. Puerto USB DIGITAL AUDIO IN (OPTICAL) Pantalla DC 19V USB (5V 0.5A) AUX IN USB USB (5V 0.5A) Cable adaptador micro USB a USB (no suministrado) 1. Conecte un cable adaptador micro USB a USB con un conector macho micro USB (tipo B) USB 2.0 en un extremo y un conector estándar hembra (tipo A) USB 2.0 en el otro extremo al conector micro USB de su Soundbar.
Lista de compatibilidad Extensión Códec Velocidad de muestreo Velocidad en bits *.mp3 MPEG 1 Layer2 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 1 Layer3 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 2 Layer3 16KHz ~ 48KHz 80 ~ 320 kbps MPEG 2.
07 CONEXIÓN DE UN DISPOSITIVO MÓVIL Conexión vía Bluetooth Cuando un dispositivo móvil está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• No puede conectar más de un dispositivo Bluetooth a la vez. Dispositivo Bluetooth La conexión inicial 1. Presione el botón (Fuente) en el panel lateral derecho o en el control remoto y luego seleccione “BT”. 2. Cambie de “BT” a “BT PAIRING”.
¿Qué son los estados BT READY y BT PAIRING? •• BT READY : En este modo, puede buscar los televisores que se conectaron anteriormente o conectarlo a la Soundbar desde un dispositivo móvil que conectó anteriormente. •• BT PAIRING : En este modo, puede conectarse a un dispositivo nuevo. (Cuando esté en modo “BT”, mantenga presionado el botón (Fuente) que se encuentra en el panel superior de la Soundbar o en el control remoto durante más de 5 segundos).
Desconexión del dispositivo Bluetooth de la Soundbar Puede desconectar el dispositivo Bluetooth de Soundbar. Para obtener instrucciones, consulte el manual del usuario del dispositivo Bluetooth. •• Soundbar se desconectará. •• Cuando se desconecta la Soundbar del dispositivo Bluetooth, aparecerá “BT DISCONNECTED” en la pantalla frontal de la Soundbar.
Uso de la aplicación Samsung Audio Remote Instalación de la aplicación Samsung Audio Remote Para controlar la Soundbar con su dispositivo inteligente y la aplicación Samsung Audio Remote, descargue la aplicación Samsung Audio Remote desde Play Store de Google.
08 USO DEL CONTROL REMOTO Cómo utilizar el control remoto Enciende y apaga la Soundbar. Encender Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Surround Surround Puede seleccionar TREBLE, BASS, o AUDIO SYNC. •• Para controlar el volumen de los sonidos Control de agudos o graves, seleccione TREBLE o sonido BASS en Ajustes de sonido y luego ajuste el volumen entre -6 y +6 con los botones Arriba/Abajo.
Bluetooth POWER Surround SOUND MODE SOUND MODE VOL •• DRC (Dynamic Range Control) Le permite aplicar el control de rango dinámico a las pistas Dolby Digital. Si mantiene presionado el botón SOUND MODE mientras está en modo De espera, se activa o desactiva el DRC (Dynamic Range Control). Cuando el DRC está activado, disminuye el sonido fuerte. (El sonido puede distorsionarse.) WOOFER Presione el botón Fuente para seleccionar una fuente que esté conectada a la Soundbar.
Presione las áreas indicadas para seleccionar Arriba/abajo/ izquierda/derecha. Arriba/abajo/ Bluetooth POWER Surround izquierda/ SOUND MODE derecha Presione Arriba/abajo/izquierda/derecha para seleccionar o configurar las funciones. •• Repetir Para utilizar la función Repetir en el modo “USB”, presione el botón Arriba. VOL WOOFER •• Saltear canciones Presione el botón Derecha para seleccionar el próximo archivo de música. Presione el botón Izquierda para seleccionar el archivo de música anterior.
W OO FE R SO M UN OD D E BA R U N D VO L N D SO SO U VO L U N D SO SO VO L U N D BA R BA R SOUND MODE Su rro un d Bl u PO eto W oth ER Bl u PO eto W oth ER W OO FE R Su rro un d SO M UN OD D E Bl u PO eto W oth ER W OO FE R Su rro un d WOOFER WOOFER BA R Bl u PO eto W oth ER SO M UN OD D E Mueva el botón hacia arriba o hacia abajo para ajustar el volumen. •• Silencio Presione el botón VOL para silenciar el sonido. Vuelva a presionarlo para reanudar el sonido.
Uso de los botones ocultos Botón oculto Página de referencia Botón del mando a distancia Función Surround Encendido/Apagado control remoto del TV Página 22 Vinculación BT Página 15 p (Reproducir/Pausar) Encendido/Apagado Auto Power Down (modo AUX) Página 20 Iniciar (espera) Página 28 VOL ID SET (espera) Página 7 Izquierda Auto Power Link ON/OFF Página 10 EQ 7 bandas Página 19 SOUND MODE DRC ON/OFF (espera) Página 20 Bluetooth POWER Encendido/Apagado Restricción del volumen Página
09 INSTALACIÓN DEL SOPORTE DE MONTAJE EN LA PARED Precauciones para la instalación •• Instálelo en una pared vertical únicamente. •• No lo instale en un lugar donde la temperatura sea alta o haya humedad. •• Verifique si la pared es lo suficientemente resistente como para soportar el peso del producto. Si no lo es, refuerce la pared o elija otro lugar para realizar la instalación.
1. Coloque la Guía para montaje en la pared 3. Pase la punta de una lapicera o la punta de sobre la superficie de la pared. un lápiz fino por el centro de las imágenes •• La Guía para montaje en la pared debe B-TYPE en cada extremo de la Guía para estar nivelada. marcar los orificios en donde irán los •• Si el televisor está colocado en la pared, tornillos de sujeción. Luego, quite la Guía instale la Soundbar a al menos 5 cm para montaje en la pared. debajo del televisor. 5 cm o más 4.
6. Utilice los dos Tornillos (M4 x L12) para •• Los montajes izquierdo y derecho tienen formas diferentes. Asegúrese de sujetar el Soporte de montaje en la pared colocarlos correctamente. izquierdo y el Soporte de montaje en la pared derecho a la parte inferior de la Soundbar. Para un encastre adecuado, asegúrese de alinear las partes Montaje en la pared sobresalientes de la Soundbar con los derecho orificios de los soportes. Montaje en la pared izquierdo 7.
10 ACTUALIZACIÓN DEL SOFTWARE Desmontaje de la Soundbar de la pared 1. Para extraer la Soundbar del soporte de montaje en la pared, desplácela en la dirección que indica la flecha, inclínela un Es posible que Samsung ofrezca actualizaciones poco hacia arriba y luego sepárela de la para el firmware del sistema de la Soundbar en pared, tal como se muestra en la imagen. el futuro. Puerto USB DIGITAL AUDIO IN (OPTICAL) DC 19V USB (5V 0.5A) AUX IN USB (5V 0.
Procedimiento de actualización 1. Conecte un cable adaptador micro USB a Si no aparece la opción UPDATE 1. Apague la Soundbar, desconecte y vuelva a USB con un conector macho micro USB (tipo conectar el dispositivo de almacenamiento B) USB 2.0 en un extremo y un conector que contiene los archivos actualizados al estándar hembra (tipo A) USB 2.0 en el otro extremo al conector micro USB de su puerto USB de la Soundbar. 2. Desconecte el cable de alimentación de la Soundbar.
11 SOLUCIÓN DE PROBLEMAS Antes de buscar ayuda, controle lo siguiente. La unidad no enciende. ¿Está el cable de alimentación enchufado en el tomacorriente? ;; Conecte el enchufe al toma corriente. No puede utilizar una función cuando presiona el botón. ¿Hay electricidad estática en el aire? ;; Desconecte el enchufe y vuelva a conectarlo. No se escucha el sonido en el modo BT. ;; Consulte las secciones de conexión vía Bluetooth en las páginas 10 y 15. No se escucha el sonido.
12 LICENCIA 14 NOTA IMPORTANTE SOBRE EL SERVICIO Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Las figuras e ilustraciones de este Manual del Dolby Laboratories. usuario se facilitan sólo como referencia y pueden diferir del aspecto real del producto. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.
15 ESPECIFICACIONES Y GUÍA Especificaciones USB Peso GENERALES AMPLIFICADOR Dimensiones (An x Al x Pr) 5V/0,5A Unidad principal de la Soundbar 1,5 kg Subwoofer (PS-WM20) 4,6 kg Unidad principal de la Soundbar 907,5 x 53,5 x 70,5 mm Subwoofer (PS-WM20) 179,0 x 353,0 x 299,5 mm Rango de temperatura de servicio +5 °C a +35 °C Rango de humedad de servicio 10 % a 75 % Potencia nominal de salida Unidad principal de la Soundbar 35W x 2, 6 ohm Subwoofer (PS-WM20) 130W, 3 ohm Formatos de reprodu
©2017 Samsung Electronics Co.,Ltd. All rights reserved Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Contact Center Web Site ` Latin America MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com/mx/support BRAZIL 0800-124-421 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros) www.samsung.