User Manual
Table Of Contents
- 01 Checking the Components
- 02 Product Overview
- 03 Using the Remote Control
- 04 Connecting the Soundbar
- 05 Using a wired connection to the TV
- 06 Using a wireless connection to the TV
- 07 Connecting an External Device
- 08 Connecting a USB drive
- 09 Connecting a Mobile Device
- 10 Installing the Wall Mount
- 11 Installing the Soundbar in front of TV
- 12 Software Update
- 13 Troubleshooting
- 14 License
- 15 Open Source License Notice
- 16 Important Notes About Service
- 17 Specifications and Guide
ENG - 28
08 CONNECTING A USB DRIVE
USB port
HDMI
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
DC 24V
USB (5V 0.5A)
USB
1. Connect the USB drive to the USB port on the bottom of the product.
2. Press the (Source) button on the top panel or on the remote control, and then select “USB”.
3. “USB” appears in the display screen.
4.
The Soundbar automatically turns off (Auto Power Down) if there is no audio signal from USB
drive or no USB drive connection for more than 18 minutes.
File Format Type Compatibility list
Extension Codec Sampling Rate Bitrate
*.mp3 MPEG1 Layer2
MPEG1 Layer3
MPEG2 Layer3
MPEG2.5 Layer3 8kHz ~ 12kHz
*.wma WMA7/8/9 (Audio Only)
*.ogg Vorbis
*.aac
*.m4a
*.mp4
A AC- LC
*.wav LPCM 32kHz ~ 192kHz
*.ac FLAC 32kHz ~ 192kHz
*.aiff AIFF 32kHz ~ 192kHz