User Manual
Table Of Contents
- 01 Checking the Components
- 02 Product Overview
- 03 The Remote Control
- 04 Connecting the Soundbar
- 05 Connecting to a TV
- 06 Connecting an External Device
- 07 Connecting a USB Storage Device
- 08 System Initialize
- 09 Installing the Wall Mount (Optional)
- 10 Software Update
- 11 Troubleshooting
- 12 License
- 13 Open Source License Notice
- 14 Important Notes About Service
- 15 Specifications and Guide
ENG - 19
Disconnecting the Soundbar from the TV
Press the button on the right side panel or on the remote control and switch to any mode but
“Bluetooth”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in “Bluetooth Ready” mode. TV Connect is turned OFF.
• To turn TV Connect back on, press and hold the button for 5 seconds with the Soundbar in
“Bluetooth Ready” mode.
• TV Connect is set to ON by default.
Mode Remote control Button LED indicator
TV Connect-OFF
5 Sec
B
W W
R
Blinking
TV Connect-ON
5 Sec
B
W W
G
Blinking
Connecting a Soundbar to a mobile device via NFC function
Step 1. Place your mobile device in the NFC detection area on top of the Soundbar
Bluetooth device
NFC
Top of the Soundbar
NOTES
– Make sure that your mobile device has the NFC function turned on and that the screen is active.
– Bluetooth connection is unavailable when NFC of the mobile device is in card emulation mode.