This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Prevent damage to subjects’ eyesight Warning—situations that could cause injury to yourself or others Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. Using the flash too close to your subject’s eyes can cause temporary or permanent damage.
Health and safety information Protect batteries, chargers, and memory cards from damage Safety precautions Handle and store your camera carefully and sensibly t Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0º C/32º F or above 40º C/104º F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. t Do not allow your camera to get wet—liquids can cause serious damage.
Health and safety information Protect your camera’s lens Important usage information t Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. Allow only qualified personnel to service your camera t Protect your lens from fingerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth. Do not allow unqualified personnel to service the camera or attempt to service the camera yourself.
Organization of the user manual Basic functions Copyright information 11 Learn about your camera’s layout, icons, and basic functions for shooting. • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. Extended functions • HDMI, the HDMI logo and the term "High Definition Multimedia Interface" are trademarks or registered trademarks of HDMI Licencing LLC.
Indications used in this manual Icons used in this manual Shooting mode Indication Smart Auto S Additional information Auto a p Safety warnings and precautions Program Icon Aperture Priority, Shutter Priority, Manual DUAL IS d Map View Scene s Movie v Shooting mode icons Function [ ] Camera buttons; for example: [Shutter] (represents the shutter button) ( ) Page number of related information ¢ The order of options or menus you must select to perform a step; for example: Select Shoot
Expressions used in this manual Exposure (Brightness) Pressing the shutter The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter.
Common questions You can get answers to common questions. Solve problems easily by setting shooting options. The subject's eyes appear red. This is caused by a reflection from the camera flash. t Set the flash option to Red-eye or Red-eye Fix. (p. 47-48) Red-eye Fix in the edit menu. (p. 77) t If the photo has already been taken, select Photos have dust spots. Dust particles floating in the air may be captured in photos when using the flash. t Turn off the flash or avoid taking photos in a dusty place.
Quick reference Taking photos of people t s mode > Beauty Shot, Portrait, Children f 30 t Red-eye, Red-eye Fix (to prevent or correct red-eye) f 47-48 t Face Detection f 54 Taking photos at night or in the dark t s mode > Night, Dawn, Firework f 30 t Flash options f 47 t ISO speed (to adjust the sensitivity to light) f 49 Taking action photos t h mode f 34 t Continuous, Motion Capture f 62 Taking photos of text, insects, or flowers t s mode > Close Up, Text f 30 Adjusting the exposure (brightnes
Contents Using the Manual mode ........................................................... 35 Using GPS ......................................................................... 36 Taking pictures with geotagging ................................................ 36 Using Map View mode ....................................................... 38 Checking the current location on the map ................................. 38 Checking shooting location on the map ....................................
Contents Applying photo styles ............................................................... 76 Defining your own RGB tone .................................................... 76 Correcting exposure problems.................................................. 77 Applying smart lens effects ....................................................... 78 Creating a print order (DPOF) .................................................... 79 Viewing files on a TV or HDTV .............................................
Basic functions Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking Check your product box for the following items. Camera AC adapter/USB cable Rechargeable battery Strap (AD44-00146A/AD39-00165A) (4302-001226) (Silver: AD63-02596A/ Black: AD63-02604A) User Manual CD-ROM Quick Start Manual (AD46-00316A) (AD68-04753A) The illustrations may differ from your actual items.
Camera layout Before you start, familiarize yourself with your camera's parts and their functions.
Camera layout Microphone Zoom button t Zoom in or out in Shooting mode. t Zoom in on part of a photo, view files as thumbnails, or adjust volume in Playback mode. t Adjust volume in Playback mode.
Icons The icons displayed will change according to the mode you select or the options you set. A Icon B C B. Icons on the right A.
Inserting the battery and memory card Removing the battery and memory card Push gently until the card disengages from the camera and then pull it out of the slot. Memory card Insert a memory card with the gold-colored contacts facing down. Battery lock Push the lock up to release the battery. Battery Insert the battery with the Samsung logo facing down. The internal memory can be used as a temporary storage device when the memory card is not inserted.
Charging the battery and turning your camera on Charging the battery Turning on your camera Before using the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter and then plug the end of cable with the indicator light into your camera. Press [POWER] to turn your camera on or off. t The initial setup screen appears when you turn on the camera for the first time. (p. 18) Turning on your camera in Playback mode Press [P].
Performing the initial setup The initial setup screen appears to allow you to configure the camera's basic settings. 1 2 Press [POWER]. t The initial setup screen appears when you turn on the camera for the first time. Press [t] to select Language and press [t] or [o]. 6 Press [D] or [M] to select Date & Time and press [t] or [o]. 7 Press [F] or [t] to select an item. Language Language Date & Time Time Zone Time Zone 2010 /01/01 10:00 Press [D] or [M] to select a language and press [o].
Selecting options You can select options by pressing [m] and pressing the navigation button([D], [M], [F], [t]). You can also access shooting options by pressing [f] but some options are not available. 1 2 In Shooting mode, press [m]. Going back to the previous menu Press [m] again to go back to the previous menu. Press the navigation button to select to an option or menu. Press [Shutter] to return to Shooting mode. t Press [D] or [M] to move up or down; press [F] or [t] to move left or right.
Selecting options E.g. Selecting a white balance option in the P mode 1 4 Rotate the mode dial to p. Press [D] or [M] to select to White Balance and then press [t] or [o]. Photo Size Quality EV ISO White Balance 2 Face Detection Press [m]. Smart FR Edit Exit Back Photo Size Shooting EV Geotagging ISO Sound White Balance Display Exit 3 Quality Movie 5 Press [F] or [t] to select to a white balance option.
Setting the display and sound Learn how to change the basic settings for the display and sound according to your preferences. About a histogram Changing the display type A histogram is a graph that displays how light is distributed in your photo. If the histogram has a high peak on the left, your photos are dark. A peak on the right of the graph means that your photos are bright. The height of the peaks is related to color information. The more of a particular color, the taller the peak.
Taking photos Learn basic actions to take photos easily and quickly in the Smart Auto mode. 1 Rotate the mode dial to S. 2 Align your subject in the frame. 3 4 Half-press [Shutter] to focus. t A green frame means the subject in focus. Press [Shutter] to take a photo. See page 25 for tips to get clearer photos.
Taking photos Digital zoom Zooming You can shoot close-up photos by adjusting the zoom. Your camera has a 15X optical zoom and 5X digital zoom. By using both, you can zoom in up to 75 times. If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom. Optical range Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom] left to zoom out.
Taking photos Reducing camera shake (OIS) t OIS may not function properly when: - you move your camera to follow a moving subject - you use digital zoom - there is too much camera shake - the shutter speed is slow (e.g., when you select Night in the s mode) - the battery is low - you take a close-up shot t If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
Taking photos Tips for getting a clearer photo Reducing camera shake Holding your camera correctly t Set the Optical Image Stabilization option to reduce camera shake optically. (p. 24) t Select the d mode to reduce camera shake both optically and digitally. (p. 29) Make sure nothing is blocking the lens. When Half-pressing the shutter button is displayed Half-press [Shutter] and adjust the focus. Focus and exposure will be adjusted automatically.
TakingPreventing photos your subject from being out of focus t When you take photos in low light It may be difficult to get your subject in focus when: - there is little contrast between the subject and background - (When your subject is wearing a color of clothing that is similar to the background) the light source behind the subject is too bright the subject is shiny the subject includes horizontal patterns, such as blinds the subject is not positioned in the center of the frame Turn on the flash. (p.
Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo. Using the Smart Auto mode ......................... 28 Using the DUAL IS mode .............................. 29 Using the Scene mode.................................. 30 Adjusting face tone and hiding imperfections .....30 Using the frame guide ........................................31 Using the Program mode ..............................
Using the Smart Auto mode In this mode, your camera automatically chooses the appropriate camera settings based on a defected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1 2 Rotate the mode dial to S. Icon Description Align your subject in the frame. Appears when taking close-up photos of text. t The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen.
Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions. Before correction 1 2 3 After correction Rotate the mode dial to d. Align your subject in the frame and half-press [Shutter] to focus. Press [Shutter] to take the photo. t The digital zoom will not work in this mode. t The photo will be corrected optically only when taken with a light source that is brighter than fluorescent light.
Using the Scene mode Take a photo with options preset for a specific scene. 1 2 Rotate the mode dial to s. Adjusting face tone and hiding imperfections Select a scene. Take a photo of a person with options to hide facial imperfections. Frame Guide This mode is appropriate for taking pictures with pre-composed scenes. 1 2 3 Rotate the mode dial to s. 4 Select Shooting ¢ Face Tone ¢ an option. Select Beauty Shot. To make the subject's skin tone appear lighter (face only), press [m].
Using the Scene mode 6 Select Shooting ¢ Face Retouch ¢ an option. Using the frame guide t Select a higher setting to hide a greater number of imperfections. When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene. 1 2 3 Level 3 Back Move 7 Align your subject in the frame and half-press [Shutter] to focus.
Using the Program mode Set various options (except for shutter speed and aperture value) in the Program mode. 1 2 Rotate the mode dial to p. Set options. (For a list of options, refer to “Shooting options.”) Photo Size Back Move 3 Align your subject in the frame and half-press [Shutter] to focus. 4 Press [Shutter] to take the photo.
Using the Aperture Priority, Shutter Priority, or Manual mode Adjust aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority, Shutter Priority, and Manual modes. Aperture value Shutter speed The aperture is a hole through which light is admitted. You can adjust the aperture value to control how much light reaches the lens when you capture a photo.
Using the Aperture Priority, Shutter Priority, or Manual mode Using the Aperture Priority mode Using the Shutter Priority mode The Aperture Priority mode allows you to manually set the aperture value while the camera automatically selects an appropriate shutter speed. The Shutter Priority mode allows you to manually set the shutter speed while the camera automatically selects an appropriate aperture value. 1 2 3 4 1 2 3 4 Rotate the mode dial to Select . and press [o]. Press [m].
Using the Aperture Priority, Shutter Priority, or Manual mode Using the Manual mode The Manual mode allows you to manually adjust both the aperture value and the shutter speed. 1 2 3 4 Rotate the mode dial to Select . and press [o]. Press [m]. Select Shooting ¢ Manual EV and then adjust the aperture value and shutter speed. Manual EV Back Move 5 Set options. (For a list of options, refer to “Shooting options.”) 6 Align your subject in the frame and half-press [Shutter] to focus.
Using GPS SapAhnd Photos with geotagging can be taken. 4 Taking pictures with geotagging Press [m] to return to the Shooting mode. When the GPS function is turned on, location information is written on the photos. Your location can be checked since the camera has a built-in GPS receiver. 1 2 3 London Current location display In Shooting mode, select [GPS ON] on the top of the camera. Press [m]. Select Geotagging and a desired setting.
Using GPS The GPS signal reception status can be checked with in the shooting mode. colors t Geotags are recorded when taking pictures by using the Continuous or AEB shooting method. t If the valid time elapses when taking pictures with the Continuous or AEB shooting method, geotags are not recorded for the pictures taken after the valid time elapses. t When taking pictures with the Motion Capture shooting method, geotags are not recorded.
Using Map View mode The location where a picture with location information was taken and its name can be checked on the map. Checking the current location on the map t WGS 84 (World Geodetic System 1984) for GPS is used. t Location information may not be displayed even if the GPS signal is received, depending on the area for use. t The battery’s consumption may occur faster when using the GPS function.
Using Map View mode 4 Checking shooting location on the map The location where a picture with location information was taken and its name can be checked on the map. Select GPS ON on the top of the camera. 1 2 3 Set the mode dial to Select a desired picture by pressing [F/t]. • The location the picture was taken in is displayed. • A desired location can be viewed by pressing [D/M/F/t] to move. Viewing the map by enlarging .
Recording a video Record videos of up to 20 minutes in length in high definition. The recorded video is saved as an H.264 (MPEG-4.AVC) file. t H.264 (MPEG-4 part10/AVC) is a high-compression video format established by international standard organizations ISO/IEC and ITU-T. t Some memory cards may not support high definition recording. In this case, set a lower resolution. (p. 44) t When the Optical Image Stabilization ( ) is activated, your video may be recorded with the OIS operation sound.
Recording a video Using the Smart Scene Detection mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. 1 2 3 4 5 6 Press [Shutter] to start recording. Press [Shutter] again to stop recording. t If the camera does not recognize a proper scene mode, will not change and the default settings will be used.
Recording voice memos apAhnds Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions. You will get the best sound quality when recording 40 cm away from the camera. Recording a voice memo Adding a voice memo to a photo 1 2 3 1 2 3 In Shooting mode, press [m]. Select Shooting ¢ Voice ¢ Record. Press [Shutter] to record. 4 Stop In Shooting mode, press [m]. Select Shooting ¢ Voice ¢ Memo.
Shooting options Learn about the options you can set in shooting mode. Selecting a resolution and quality ................. 44 Adjusting brightness and color ..................... 59 Selecting a resolution .........................................44 Selecting image quality.......................................44 Adjusting the exposure manually (EV) .................59 Compensating for backlighting (ACB).................59 Changing the metering option ............................
Selecting a resolution and quality Learn how to change the image resolution and quality settings. Selecting a resolution SapAhndsv As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. When recording a video: 1 2 In the v mode, press [m]. Select Movie ¢ Movie Size ¢ an option.
Using the timer SapAhndsv Learn how to set the timer to delay shooting. 1 3 In Shooting mode, press [t]. Press [Shutter] to start the timer. t The AF-assist light/timer lamp blinks. The camera will automatically take a photo at the specified time. t Press [t] to cancel the timer. t Depending on the selected face detection option, the timer is not available or some timer options are not available. Off 2 Select an option. Option Description Off: The timer is not active.
Using the timer 6 Using the motion timer 1 2 3 4 5 In Shooting mode, press [t]. Select Pose for your photo while the AF-assist light/timer lamp is blinking. t The AF-assist light/timer lamp will stop blinking just before the camera automatically takes a photo. . Press [Shutter]. Stand within 3 m from the camera within 6 seconds after pressing [Shutter]. Make a motion, such as waving your arms, to activate the timer.
Shooting in the dark Learn how to take photos at night or in low light conditions. Preventing red-eye Using the flash aps If the flash fires when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select Red-eye or Red-eye Fix. SapAhns Use the flash when taking photos in the dark or when you need more light on your photos. 1 In Shooting mode, press [F]. Auto 2 Select an option. Option Description Off: t The flash will not fire.
Shooting in the dark Adjusting the amount of flash Option Description Slow Sync: t The flash fires and the shutter stays open longer. t Select this when you want to capture ambient light to reveal more details in the background. t Use a tripod to prevent your photos from blurring. Fill in: t The flash always fires. t Light intensity is adjusted automatically. pAhn Adjust the amount of flash to avoid overexposure or underexposure. 1 2 3 In Shooting mode, press [m]. Select Shooting ¢ Flash EVC.
Shooting in the dark Adjusting the ISO speed pAhn The ISO speed is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash. 1 2 In Shooting mode, press [m]. Select Shooting ¢ ISO ¢ an option. t Select to use an appropriate ISO speed based on the brightness of the subject and lighting.
Changing the camera’s focus Learn how to adjust the camera's focus according to your subjects. Using macro Setting the focus distance apAhndv Use macro to take close-up photos of subjects, such as flowers or insects. Refer to macro options in “Setting the focus distance.” apAhndv To take sharp photos, select the appropriate focus according to your distance from the subject. 1 In Shooting mode, press [M]. Normal (AF) 2 Select an option.
Changing the camera’s focus Adjusting the focus distance manually 1 2 3 Using tracking auto focus pAhns In Shooting mode, press [M]. Tracking AF allows you to track and auto focus on your subject, even when you are moving. Select Manual Focus. 1 2 3 Rotate the navigation button to adjust the focus distance. t When you adjust the focus distance manually and the subject is out of focus, the photo may become blurry.
Changing the camera’s focus t Tracking a subject may fail when: - the subject is too small or the subject moves excessively - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the camera shakes excessively In these cases, the focus frame will appear as a white single-line frame. t If the camera fails to track the subject, you must reselect the subject to track.
Changing the camera’s focus Adjusting the focus area apAhnds You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene. 1 2 In Shooting mode, press [m]. Select Shooting ¢ Focus Area ¢ an option. Option Description Center AF: Focus on the centre (suitable when subjects are located in the centre). Multi AF: Focus on one or more of 9 possible areas. Tracking AF: Focus on and track the subject. (p. 51) Selection AF: Focus on the area you select.
Using face detection apAhnds If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. t In some scene modes, face detection is unavailable.
Using face detection Taking a self-portrait shot Taking a smile shot Take photos of yourself. The focus distance will be set to close-up and your camera will emit a beep. The camera automatically releases the shutter when it detects a smiling face. 1 2 3 1 2 In Shooting mode, press [m]. Select Shooting ¢ Face Detection ¢ Self-Portrait. In Shooting mode, press [m]. Select Shooting ¢ Face Detection ¢ Smile Shot. t When your subject smiles broadly, your camera can detect the smile more easily.
Using face detection Detecting eye blinking Using smart face recognition If your camera detects closed eyes, it will automatically take 2 photos in succession. The camera automatically registers faces that you frequently photograph (up to 10 people). This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card. 1 2 In Shooting mode, press [m]. Select Shooting ¢ Face Detection ¢ Blink Detection.
Using face detection t The camera may recognize and register faces incorrectly depending on lighting conditions, remarkable changes in the subject’s pose or face, and whether or not the subject is wearing glasses. t The camera can automatically register up to 12 faces. If the camera recognizes a new face when there are 12 registered faces, it will replace the face in the lowest priority with the new one. t The camera can detect up to 10 faces in one scene.
Using face detection t You can register up to 8 favorite faces. t The flash option will be set to Off. t If you register the same face twice, you can delete one of the faces in the face list. Viewing your favorite faces 1 2 In Shooting mode, press [m]. Select Shooting ¢ Smart FR Edit ¢ Face List . t To change the ranking of the favorite faces, press [f] and select Edit Ranking.(p. 68) t To cancel the favorite faces, press [f] and select Delete My Star. (p.
Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) Compensating for backlighting (ACB) pAhndv When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. Depending on the intensity of the ambient light, your photos may be too bright or dark.
Adjusting brightness and color Changing the metering option pAhndv The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. 1 2 In Shooting mode, press [m]. Selecting a light source (White balance) pAhndv The color of your photo depends on the type and quality of the light source.
Adjusting brightness and color 1 2 In Shooting mode, press [m]. Defining your own white balance Select Shooting ¢ White Balance ¢ an option. Icon 1 2 Description Auto WB: Use automatic settings depending on the lighting conditions. Daylight: Select when taking outdoor photos on a sunny day. In Shooting mode, press [m]. Select Shooting ¢ White Balance ¢ Measure: Shutter. 3 Aim the lens at a piece of white paper. 4 Press [Shutter].
Using burst modes pAhns It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes. t You can use the flash, timer, and ACB only when you select Single. t When you select Motion Capture, the ISO speed will be set to Auto. t Depending on the selected face detection option, some burst options are not available. 1 2 In Shooting mode, press [m]. Select Shooting ¢ Drive ¢ an option.
Improving your photos Learn how to improve your photos by applying photo styles or colors, or make some adjustments. Applying photo styles Defining your own RGB tone apAhnv Apply a different photo style to your photos, such as Soft, Vivid, or Forest. 1 2 3 Soft 1 2 Vivid In Shooting mode, press [m]. Select Shooting ¢ Photo Style Selector ¢ Custom RGB. Select a color (R: Red, G: Green, B: Blue). Forest In Shooting mode, press [m]. Select Shooting ¢ Photo Style Selector ¢ an option.
Improving your photos Applying smart lens effects apAhnv Apply various lens effects to your photos to create unique images. 1 2 3 In Shooting mode, press [m]. Select Shooting ¢ Smart Filter. Select an effect. Option Description Normal: No effect Miniature Miniature: Make a photo of a life-size location or object look like a photo of a miniature scale model. Blurring parts of the photo makes the scene seem much smaller than it actually is.
Improving your photos Adjusting your photos pAhn Saturation option Description Adjust the contrast, sharpness, and saturation of your photos. - Decrease the saturation. 1 2 3 + Increase the saturation. 4 In Shooting mode, press [m]. Select Shooting ¢ Image Adjust. t Select 0 if you do not want to apply any effects. (suitable for printing) t When Image Adjust is set, Photo Style Selector function is not available. Select an adjustment option.
Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV. Playing back ............................................................................. 67 Starting Playback mode .................................................................67 Viewing photos ..............................................................................72 Playing a video ...............................
Playing back Learn actions to play back photos, videos, or voice memos, and managing files. Starting Playback mode Icon View photos or play videos and voice memos stored in your camera. 1 2 Description Photo includes a voice memo Video file Press [P]. Print order has been set (DPOF) t The most recent file you have taken or recorded will be displayed. t If the camera is off, it will turn on.
Playing back Ranking your favorite faces Canceling your favorite faces You can change the ranking of your favorite faces or delete them. This feature is available only when you use a memory card. 1 2 3 In Playback mode, press [m]. Select File Options ¢ Face List Edit ¢ Edit Ranking. Select a face from the list and press [o]. Edit Ranking 1 4 2 5 3 6 4 8 Back 4 1 2 3 4 5 In Playback mode, press [m]. Select File Options ¢ Face List Edit ¢ Delete My Star. Select a face and press [o]. Press [f].
Playing back Viewing files by category in Smart Album View and manage files by categories, such as date, file type, week, color, face, or location. 1 2 3 4 Press [F] or [t] to scroll through files. 5 Press [o] to return to the normal view. t Press and hold [F] or [t] to view files quickly. In Playback mode, rotate [Zoom] left. Press [m]. Viewing files as thumbnails Select a category. Scan thumbnails of files.
Playing back Protecting files Deleting files Protect your files from accidental deletion. Delete single files or all files at once. You cannot delete protected files. 1 2 Select File Options ¢ Protect ¢ Select. To delete a single file, t To protect all files, select All ¢ Lock. 3 Select the file you want to protect and press [o]. 1 2 In Playback mode, press [m]. t Press [o] again to cancel your selection. In Playback mode, select a file and press [f]. Select Yes to delete the file.
Playing back Using the recycle bin Copying files to the memory card If you activate the recycle bin, files you delete will be sent to the recycle bin instead of being deleted permanently. This applies to single files or selected files only–if you choose to delete all files, those files will not be sent to the recycle bin. To activate the recycle bin, 1 2 You can copy files from the internal memory to a memory card. 1 2 3 In Playback mode, press [m]. Select File Options ¢ Copy to Card.
Playing back Starting a slide show Viewing photos You can apply effects and audio to your slide show. Zoom in on part of a photo or view photos in a slide show. Enlarging a photo In Playback mode, rotate [Zoom] right to enlarge a photo (rotate [Zoom] left to reduce a photo). 1 2 3 The enlarged area and zoom ratio are indicated on the top of the screen. The maximum zoom ratio may vary depending on the resolution. In Playback mode, press [m]. Select Multi Slide Show. Select a slide show effect option.
Playing back 4 5 2 Set the slide show effect. Use the following buttons to control playback. Select Start ¢ Play. Press To t To loop the slide show, select Repeat. t Press [o] to pause or resume the slide show. [F] Scan backward. [o] Pause or resume playback. [t] Scan forward. [Zoom] left or right Adjust the volume level. To stop the slide show and switch to Playback mode, press [o] and then [F] or [t].
Playing back Capturing an image during playback Playing a voice memo added to a photo 5 Press [o] at the point where you want to save a still image. 6 Press [M]. In Playback mode, select a photo that includes a voice memo and press [o]. t Press [o] to pause or resume playback. A captured image will have the same file size as the original video file and will be saved as a new file. Playing voice memos Playing a voice memo 1 2 In Playback mode, select a voice memo and press [o].
Editing a photo Perform photo editing tasks, such as resizing, rotating, eliminating red-eyes, and adjusting brightness, contrast, or saturation. Edited photos will be saved as new files. Resizing photos Rotating a photo 1 2 1 2 In Playback mode, select a photo and press [m]. Select Edit ¢ Resize ¢ an option. In Playback mode, select a photo and press [m]. Select Edit ¢ Rotate ¢ an option. Right 90° Back Move Back to save the photo as a start image. (p.
Editing a photo Applying photo styles Defining your own RGB tone Apply a different photo style to the photo, such as Soft, Vivid, or Forest. 1 2 3 Soft 1 2 Vivid In Playback mode, select a photo and press [m]. Select Edit ¢ Photo Style Selector ¢ Custom RGB. Select a color (R: Red, G: Green, B: Blue). Forest In Playback mode, select a photo and press [m]. Select Edit ¢ Photo Style Selector ¢ an option. t Select Custom RGB to define your own RGB tone.
Editing a photo Adjusting brightness/contrast/saturation Correcting exposure problems 1 2 3 Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation; remove red-eye; hide facial imperfections; or add noise to the photo. Adjusting ACB (Auto Contrast Balance) 1 2 In Playback mode, select a photo and press [m]. Select Edit ¢ Image Adjust ¢ ACB. 4 In Playback mode, select a photo and press [m]. Select Edit ¢ Image Adjust. Select an adjustment option.
Editing a photo Applying smart lens effects Apply various lens effects to your photos to create unique images. 1 2 3 In Playback mode, select a photo and press [m]. Select Edit ¢ Smart Filter. Select an effect.
Editing a photo Creating a print order (DPOF) Select photos to be printed and set options, such as number of copies or paper size. t The memory card can be taken to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. t Wide photos may print with the left and right edges cut off, so be aware of the dimensions of your photos. t You cannot set the DPOF for the photos stored in the internal memory.
Viewing files on a TV or HDTV Play back photos or videos by connecting your camera to a TV using the provided A/V cable. 1 Select a video signal output according to your country or region. (p. 93) 2 3 Turn off your camera and TV. t On some TVs, digital noise may occur or part of an image may not appear. t Images may not appear centred on the TV screen depending on your TV settings. t You can capture photos or videos while the camera is connected to a TV.
Viewing files on a TV or HDTV 5 Connect your camera to your HDTV using the optional HDMI cable. HDMI cable 6 7 Turn on your camera. t The HDTV will be powered on automatically and the camera screen will be displayed. View files using the buttons on your camera or a remote control of your camera or HDTV.
Transferring files to your computer (for Windows) Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites. Requirements for Intelli-studio t Intelli-studio may not perform correctly on some computers, even when the computer meets the requirements. t If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. t Install DirectX 9.
Transferring files to your computer (for Windows) 5 Transferring files using Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. Turn on the camera. t The computer recognizes the camera automatically. If you set the USB option to Select Mode, select Computer from the pop-up window. The battery will be charged while the camera is connected to a computer with the USB cable. 6 1 2 3 4 In Shooting or Playback mode, press [m].
Transferring files to your computer (for Windows) Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select Menu ¢ Help in the program. t If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Menu ¢ Install Intelli-studio on PC. t You cannot edit files directly on the camera.
Transferring files to your computer (for Windows) 1 Open menus Transferring files by connecting the camera as a removable disk 2 Display files in the selected folder You can connect the camera to your computer as a removable 3 Change to the Photo edit mode disk. 4 Change to the Video edit mode 5 Change to the Sharing mode (You can send files by email or upload files to websites, such as Flickr or YouTube.
Transferring files to your computer (for Windows) 5 Turn on the camera. Disconnecting the camera (for Windows XP) t The computer recognizes the camera automatically. If you set the USB option to Select Mode, select Computer from the pop-up window. 6 On your computer, select My computer ¢ Removable Disk ¢ DCIM ¢ 100PHOTO. 7 Select the files you want and drag or save them to your computer. The way to disconnect the USB cable for Windows Vista/7 is similar.
Transferring files to your computer (for Mac) When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 1 Connect your camera to a Macintosh computer with the USB cable. 2 Turn on the camera. t The computer recognizes the camera automatically and a removable disk icon will be displayed.
Printing photos with a photo printer (PictBridge) Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. 1 2 3 In Shooting or Playback mode, press [m]. Configuring print settings Select Setting ¢ USB ¢ Printer. With the printer on, connect your camera to the printer with the USB cable.
Appendixes Refer to settings, error messages, specifications, and maintenance tips. Camera settings menu .................................. 90 Accessing the settings menu .............................90 Sound ................................................................91 Display ...............................................................91 Settings ..............................................................92 Error messages.............................................. 95 Camera maintenance ....
Camera settings menu Learn about various options to configure your camera's settings. 3 Accessing the settings menu 1 2 Select an option and save your settings. In Shooting or Playback mode, press [m]. Volume Off Start Sound Low Select a menu. Shutter Sound Beep Sound Shooting AF Sound Volume Shutter Sound Geotagging Beep Sound Sound AF Sound Back 4 Display Menu High Start Sound Movie Exit Medium Change Description Sound: Set various camera sounds and volume. (p.
Camera settings menu Sound Item * Default Item Description Volume Adjust the volume of any sound. (Off, Low, Medium*, High) Start Sound Select a sound to be emitted when turning on your camera. (Off*, 1, 2, 3) Shutter Sound Select a sound to be emitted when pressing the shutter button. (Off, 1*, 2, 3) Beep Sound Select a sound to be emitted when pressing the buttons or switching modes. (Off, 1*, 2, 3) AF Sound Set a sound to be emitted when half-pressing the shutter button.
Camera settings menu Settings * Default * Default Item Description Item Format the internal memory and the memory card (all files-including the protected files-will be deleted). (Yes, No) Format Description Specify how to name files. t Reset: Set the file number to start from 0001 when inserting a new memory card, formatting a memory card, or deleting all files.
Camera settings menu * Default * Default Item Description Item Description Video Out Set the video signal output according to your region. t NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico. t PAL* (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, Finland, Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. AF Lamp Set an assistant light to help you focus in dark places.
Camera settings menu * Default Item HDMI Size Description Select the resolution of photos when playing back files on an HDTV with the HDMI cable. (NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p) If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. USB Set the function to use via a USB connection with a computer or printer. t Computer*: Connect your camera to a computer for transferring files.
Error messages When the following error messages appear, try these remedies. Error message Suggested remedies Card Error t Turn off your camera and then turn it on again. t Remove your memory card and insert it again. t Format your memory card. (p. 92) Unlock the memory card. Card Locked DCF Full Error File names do not match the DCF standard. Transfer the files on the memory card to your computer and format the card. (p. 92) File Error Delete the damaged file or contact a service centre.
Camera maintenance Camera body Cleaning your camera Wipe gently with a soft, dry cloth. Camera lens and display Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently. t Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. t Do not press on the lens cover or use a blower brush on the lens cover.
Camera maintenance Memory card capacity About memory cards The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB SD card: Memory cards you can use You can use SD (Secure Digital) or SDHC (Secure Digital High Capacity) memory cards. Size Terminal Write-protect switch Label (front) You can prevent files from being deleted by using a write-protect switch on the SD or SDHC card. Slide the switch down to lock or slide it up to unlock.
Camera maintenance About the battery Battery life Use only Samsung-approved batteries. Shooting time / Number of photos Shooting conditions (when the battery is fully charged) Battery specifications Mode SLB-11A Type Lithium-ion battery Cell capacity 1,130 mAh Voltage 3.8 V Charging time (when the camera is switched off) Approx. 190 min This is measured under the following conditions: in the a mode, 12M resolution, Fine quality, OIS on. 1.
Camera maintenance Notes about charging the battery Notes about charging with a computer connected t If the indicator light is off, make sure that the battery is inserted correctly. t Turn off your camera when charging. t Turn on your camera after charging the battery for more than 10 minutes. t Using the flash or recording videos depletes the battery quickly. Charge the battery until the indicator light turns green.
Camera maintenance t Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. t Use only authentic, manufacturer-recommended, Lithiumion replacement batteries. t Do not disassemble or puncture the battery with any sharp object. t Avoid exposing the battery to high pressure or crushing forces. t Avoid exposing the battery to major impacts, such as dropping it from high places.
Before contacting a service centre If you are having trouble with your camera, try these troubleshooting procedures before contacting a service centre. If you have attempted the troubleshooting solution and are still having problems with your device, contact your local dealer or service centre. Situation Suggested remedies Cannot turn on the camera t Make sure that the battery is inserted. t Make sure that the battery is inserted correctly. t Charge the battery.
Before contacting a service centre Situation Suggested remedies The date and time are incorrect Set the date and time in the display settings menu. Situation Suggested remedies The photo is too bright Your photo is overexposed. t Adjust the exposure value. (p. 59) t Adjust the aperture value or the shutter speed. (p. 33) t Turn off the flash. (p. 47) t Adjust the ISO speed. (p. 49) The display or buttons do not work Remove the battery and insert it again.
Before contacting a service centre Situation Suggested remedies Your computer does not recognize your camera t Make sure that the USB cable is connected correctly. t Make sure that your camera is switched on. t Make sure that you are using a supported operating system. Your computer disconnects the camera while transferring files The file transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again.
Camera specifications Image sensor Shutter speed Type 1/2.3" (Approx. 1.10 cm) CCD Effective pixels Approx. 12.0 mega-pixels Total pixels Approx. 14.2 mega-pixels t Auto: 1- 1/2,000 sec. t Manual: 16 - 1/2,000 sec. t Night: 8 - 1/2,000 sec. t Firework: 2 sec. Lens Exposure Focal length Schneider-KREUZNACH lens f = 3.9 ~ 58.5mm (35 mm film equivalent: 24 ~ 360mm), 15X optical zoom F-stop range F3.2(W) ~ F5.8(T) Metering Multi, Spot, Center-weighted Digital zoom t Still image mode: 1.
Camera specifications t Format: H.
Camera specifications Voice recording For 1GB SD t Voice Recording (Max 10 hours) t Voice Memo in a photo (Max. 10 sec.) t Stereo recording Super fine Fine Normal 4000 x 3000 147 284 403 3984 x 2656 167 313 441 Storage 3840 x 2160 202 367 528 3264 x 2448 211 374 537 2560 x 1920 339 566 792 2048 x 1536 532 802 1065 Media t Internal memory: Approx.
Camera specifications Power source Rechargeable battery Lithium-ion battery (SLB-11A, 1,130 mAh) The power source may differ depending on your region. Dimensions (W x H x D) 106.6 x 60.5 x 28 mm Weight 214.6 g (without battery and memory card) Operating temperature 0 - 40˚ C Operating humidity 5 - 85 % Software Intelli-studio Specifications are subject to change without prior notice.
FCC notice ■ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Index A ACB 59, 77 Adjusting Brightness 77 Contrast in Playback mode 77 in Shooting mode 65 Saturation In Playback mode 77 in Shooting mode 65 Sharpness 65 Charging 99 Life 98 Specifications 98 Deleting files 70 Digital Image Stabilisation 29 Beauty Shot mode 30 Digital zoom 23 Facial brightness 30 Blink detection 56 Display brightness 91 Facial imperfections 30 Burst Display type 21 Flash Auto Exposure Bracket (AEB) 62 Continuous 62 Motion capture 62 DPOF 79 Dual IS mode 29 AF Lamp 93 AF Soun
Index Frame guide 31 L O Recycle bin 71 Frame rate 40 Light source (White balance) 60 Optical Image Stabilisation (OIS) 24, 29 Red-eye 47 M P Macro 50 Photo quality 44 Maintenance 96 Photo styles 63 Manual mode 35 Playback button 14 Map View 38 Playback mode 67 Memory card 97 Printing photos 88 H MENU button 14 Print order 79 Half-pressing 6 Metering Program mode 32 S Protecting files 70 Scene mode 30 Function button 14 Function description 91 G Geotagging 36 GPS 36 Grid lines
Index Shooting mode Aperture Priority 34 Dual IS 29 Manual 35 Movie 40 Program 32 Scene 30 Shutter Priority 34 Smart Auto 28 Shutter Priority mode 34 Shutter speed 33 Slide show 72 Smart Album 69 Smart Auto mode 22, 28 Smart Filter Fish-eye 64 Miniature 64 Vignetting 64 Smart Scene Detection 41 Smile shot 55 Start image 91 T Z Timer 45 Zoom button 14 Zooming 23 V Video Playing 73 Recording 40 Video Out 93 Viewing files as thumbnails 69 by category 69 on TV 80 Slide show 72 Voice memo Playing 74 Rec
Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.
