User manual

28
2.
Press the Directional key to highlight
Settings & Tools menu and press .
3. Press Phone Settings.
4. Press System Select.
5. Press the Directional key up or down to choose the
setting you want, and press .
Voice Commands
Voice Commands is advanced speech recognition software that
can be used to activate a wide variety of functions on your phone.
Voice Commands software automatically voice activates all
contacts for voice dialing and searching, no pre-recording or
training needed. Speak phone numbers naturally to dial, and use
voice commands to navigate phone menus.
Voice Commands Settings
You can adjust the settings and preferences by opening Voice
Commands menu. Using this menu, you can change the
following Voice Command features:
1. From the home screen,
press the Voice
Commands key
on the right side of the
phone. The Voice
Commands screen
appears in the display.
2. Press the right soft key
Settings .The
following options appear
in the display:
•TXT Msg Readout : Reads out the text in a TXT message.
• Confirm Choices : Choose from Automatic, Always Confirm, or
Never Confirm.
• Sensitivity : Sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize
names, numbers, or commands, and rejecting too little, which
means it frequently recognizes something even if nothing was said.
Choose from More Sensitive, Automatic, or Less Sensitive.
• Adapt Voice : Use the Adapt Voice menu to adapt digit dialing and
name dialing to your voice.
– Adapt VoiceMode : Lets you adapt your voice, which can improve
speech recognition. Adaptation takes about 60 seconds.
u450.book Page 28 Wednesday, August 19, 2009 6:03 PM