user manual

1EasyInstallation
You can set up the network, IP address and system server information settings for activation easily.
After connecting power to the product, the Activation
screen is displayed.
Select the 1 Easy Install, and press the Enter[OK]
button.
End
1 Easy Install
2 Phone Information
3 Network
4 Server
Initial Environment Settings for Activation
Once you connect the phone to its power source, a start-up process begins. After several minutes, the
phone’s LCD screen displays the Initial Environment Settings screen for Activation.
Or press and hold [
] button while in booting the phone to enter the Initial Environment Settings for
Activation screen.
NOTE
You can show the Network setting screen.
Select desired network mode, and press the
Enter[OK] button.
End Back
1 Static IP
2 Dynamic IP
3 PPPoE
If the 1 Static IP.....
Enter the IP Address Subnet Mask Gateway
address, and press the Enter[OK] button.
-The Network information inquires to administrator.
Del. Back
123.123.123.123
Enter IP Address
Del. Back
255.255.255.0
Enter Subnet Mask
Del. Back
234.234.234.234
Enter Gateway
Preparations