user manual
3Network
You can set up the network for manually.
In Activation screen, select the 3 Network Setting,
and press the Enter[OK]button.
End
1 Easy Install
2 Phone Information
3 Network
4 Server
2PhoneInformation
You can confirm the your IP Phone’s S/W version, Network information and MAC address.
In Activation screen, select the 2 Phone Information,
and press the Enter[OK] button.
End
1 Easy Install
2 Phone Information
3 Network
4 Server
Select desired Information mode, and press the
Enter[OK]button.
You can show the each information screen.
You can show the Network setting screen.
Select desired network mode, and press the
Enter[OK] button.
End Back
1 Static IP
2 Dynamic IP
3 PPPoE
4 VLAN(LAN Port)
In case of 1 Static IP.....
Enter the IP Address Subnet Mask Address
Gateway Address, and press the Enter[OK]
button.
-The System information inquires to administrator.
Del. Back
123.123.123.123
Enter IP Address
Del. Back
255.255.255.0
Enter Subnet Mask
Del. Back
234.234.234.234
Enter Gateway
In case of 2 Dynamic IP.....
Enter the IP Address Subnet Mask Address
Gateway Address, and press the Enter[OK]
button.
End Back
1 Static IP
2 Dynamic IP
3 PPPoE
4 VLAN(LAN Port)
Set DHCP Mode
[Network Setting]
Preparations
End Back
1 Version Info.
2 Network Info.
3 MAC Address
Back
SMT-i5220 V1.40
(09.07.16 13:00)
Copyright @
2009 SAMSUNG
End Back
1 Version Info.
2 Network Info.
3 MAC Address
Back
Mode : Static IP
IP : 123.123.123.123
SUBNETMASK :
[Network Information]
End Back
1 Version Info.
2 Network Info.
3 MAC Address
In case of 3 PPPoE.....
Enter the User ID Password,and press the
Enter[OK] button.
-ThePPPoE item is reserved for additional functions.
-The Network information inquires to administrator.
End Back
1 Static IP
2 Dynamic IP
3 PPPoE
4 VLAN(LAN Port)
Del. Back
Anonymous
Enter User ID