MICRO COMPONENT SYSTEM CD-R/RW PLAYBACK MM-L7 Instruction Manual Downloaded From Disc-Player.
Safety Warnings GB Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. CAUTION RISK OF ELECTRIC SHOCK.
You have just purchased a SAMSUNG micro component system. Contents Please take the time to read these instructions, as they will enable you to set up your player easily and take full advantage of its features. ◆ INSTALLING YOUR MICRO COMPONENT SYSTEM Safety Warnings ........................................................................................................................... 2 Front Panel View ..................................................................................................
Front Panel View GB 9 1 10 2 11 FUNC. 3 12 Volume R 13 CD/TAPE/TUNING 4 5 6 7 8 Tuning Mode Display Repeat A B CD Repeat 14 PTY Band Preset EQ +10 (CD) PROG./Set CD Synchro Start/Stop Record 15 16 1. 2. 3. 4. 5. 6. 7. 8. CD Door Open/Close( ) On / Standby Multi-Function(CD/TAPE/TUNING) CD Repeat Tuning Mode(Stop) Band PROG./Set CD Synchro 4 Downloaded From Disc-Player.com Samsung Manuals 9. Push Eject( ) 10.Phones jack 11.Function 12.Volume control 13.Repeat (A↔B) / Display 14.
Remote Control GB 9 On/Standby Sleep Mute 10 1 2 Power Sound Preset EQ Timer on/off Timer/ Clock Tape Mono/ST. Mode Repeat Program/ Set 12 3 4 11 5 6 14 CD/TAPE/MP3 Band 13 Function 15 7 VOL. 16 8 Tuning Mode VOL. 1. 2. 3. 4. 5. 6. 7. 8. 9. On/Standby Preset EQ Power Sound Mono / ST. Tape Mode Multi-Function (CD / TAPE) Band Volume Control Sleep 17 10. Mute 11. Timer on / off 12. Timer / Clock 13. Program/Set 14. Repeat 15. Function 16. Radio station search 17.
Rear Panel View GB 1 2 3 4 5 1. 2. 3. 4. 5. FM AERIAL CONNECTOR TERMINAL CD DIGITAL OUT JACK AM(MW)/LW AERIAL CONNECTOR TERMINALS AUX INPUT LOUDSPEAKERS CONNECTOR TERMINALS 6 Downloaded From Disc-Player.
Where to Install Your Micro-Component System To take full advantage of your new MICRO component system, follow these installation instructions before connecting the unit. ◆ Install the system on a flat, stable surface. ◆ Never place this unit on carpeting. ◆ Never locate this unit in an outdoor area. ◆ Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes. ◆ Make sure that you have enough room to open the compact disc compartment easily.
Connecting to an External Source GB The auxiliary input can be used to take advantage of the sound quality of your MICRO component compact system when listening to other sources. Example: A television A video disc player A Hi-Fi stereo video cassette recorder To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable. 1 2 Set the system to standby mode and disconnect it and the external source from the main.
Connecting the AM (MW)/LW Aerial The AM aerial (for long and medium waves) can be: ◆ Placed on a stable surface ◆ Fixed to the wall (you must first remove the base) GB The AM aerial connector terminals are located on the rear of the system and are marked AM. To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. Connecting the FM Aerial How to connect a COAXIAL TYPE aerial.
Setting the Clock GB Listening to a Compact Disc Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock: When you purchase the Micro component system After a power failure After unplugging the unit For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 2 Switch the system on by pressing On/Standby. Press Timer/Clock twice. Result: CLOCK is displayed.
Selecting a Track CD Repeat Function You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing. To start playback at the beginning of the... You can repeat: Press... Next track ................................................. I once Current track ............................................ I once Previous track .......................................... I twice Track of your choice .................................
Checking and Changing Programmed Tracks You can check and change your selection of tracks at any time. GB Searching for and Storing the Radio Stations You can store up to: 15 FM stations 8 MW stations 7 LW stations You must have selected at least one track. 1 Press STOP (■) once if you have started listening to the selection. 2 Press Program/Set. Each time you press Program/Set, the next selection is displayed. 3 Press Program/Set one or more times until the track to be changed is displayed.
Searching for and Storing the Radio Stations(continued) 6 Adjust the volume by: Pressing Volume + or - on the front panel or Pressing the VOL. + or - buttons on the remote control 7 Select the stereo or mono mode by pressing Mono/ST. Result: The STEREO indicator is displayed when selected. 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press Program/Set. Result: The program number and PROGRAM are displayed for a few seconds.
About RDS broadcasting GB About RDS DISPLAY function This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc.) to be received from the FM RDS station together with normal radio signal. 1 2 3 Press the On/Standby button. Receive the FM radio. See the radio receiving method on the page 12.
PTY(Program Type) indication and PTY-SEARCH function ◆ The PTY information is composed of an identification symbol, which helps the FM radio to recognize the program type of each FM station. ◆ The below 30 PTY information is shown on the display by pressing the Pty button. About PTY-SEARCH Searches the same PTY as the program type of broadcasting station.
Listening to a Cassette GB 1 2 3 Selecting the Cassette Playback Mode Switch the system on by pressing On/Standby. Select the TAPE function by pressing FUNC. on the front panel. Open the cassette deck by pushing on the corner of the cover marked Push Eject until you hear a click and then releasing it. Insert the pre-recorded cassette with the open edge of the tape facing downwards. Close the deck by pushing on it until it clicks into place. 4 5 6 To listen to...
Repeat (A↔B) Function Recording a Radio Programme You can record a radio programme of your choice and listen to it at a later date. GB When you select CD(TAPE) Repeat (A↔B) playback, the music passages to which you were listening is repeated 3 times. 1 Insert a blank cassette in the cassette deck. 2 Select the TUNER function by pressing FUNC. button. 3 Select the radio station that you wish to record by pressing Tuning õ or ö . 4 To start recording, press the Record Start/Stop button.
Timer Function GB The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. If you no longer want the system to be switched on or off automatically, you must cancel the timer. On/Standby Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
Setting the System to Switch Off Automatically While listening to a compact disc or a cassette, you can set the system to switch off automatically. Example: You wish to go to sleep to music. 1 Press Sleep. Result: The following indications are displayed: 2 Press Sleep one or more times to indicate how long the system should continue playing before it switches off: 90 MIN OFF 3 60 MIN 15 MIN 45 MIN 30 MIN At any time, you can: Check the remaining time by pressing Sleep.
Power Sound function GB This machine is equipped with the function of Power Sound which amplifies bass treble output to twice as much for powerful real sound. Connecting Headphones You can connect a set of headphones to your micro component system so that you can listen to music or radio programs without disturbing other people in the room. The headphones must have a 3.5 mm connector or appropriate adapter. 1 Press the Power Sound button. Result: P, SOUND is displayed for a few seconds.
Safety Precautions Before Contacting the After-Sales Service The following diagrams illustrate the precautions to be taken when using or moving your Micro component system. 10% It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call. 75% 35° Problem H Checks/Explanation H 5° FUNC. Volume FUNC.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW Usable sensitivity FM Signal/noise ratio Usable sensitivity Total harmonic distortion AM (MW) Signal/noise ratio Usable sensitivity Total harmonic distortion 60 dB 60 dB 6 dB 1.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS AH68-00770B Downloaded From Disc-Player.
