Instruction manual

GB
12
You can check and change your selection of tracks at any time.
You must have selected at least one track.
1 Press STOP ( ■ ) once if you have started listening to the
selection.
2 Press Program/Set.
Each time you press Program/Set, the next selection
is displayed.
3 Press Program/Set one or more times until the track to be
changed is displayed.
4 Press SKIP I or I to select the new track.
5 Press CD (ˆ¨) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1 Switch the system on by pressing On/Standby.
2 Select the TUNER function by pressing FUNC. button.
3 Select the required frequency band by pressing Band button.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW Long Wave
4 To search for a Press Tuning Mode button
station... on the front panel....
Manually
One or more times until MANUAL is displayed.
Automatically
One or more times until AUTO is displayed .
5 Select the station to be stored by:
Pressing Tuning or on the front panel
or
Pressing Tuning or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Tuning or buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
Checking and Changing Programmed Tracks Searching for and Storing the Radio Stations
On/Standby
Sleep
CD/TAPE/MP3
Mono/ST.
Band Function
Tape
Mode
Program/
Set
Repeat
Timer
on/off
Timer/
Clock
Preset
EQ
Power
Sound
Mute
VOL.
VOL.
Tuning
Mode
23
5
1
4
4
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
CD Repeat
Repeat A B
Preset EQ +10 (CD)
Record
PTY
Display
Start/Stop
Band
PROG./Set
CD Synchro
Band
2
3
1
5
4
5
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Samsung Manuals