Instruction manual

GB
7
To take full advantage of your new MICRO component system,
follow these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never locate this unit in an outdoor area.
Maintain an open space of approximately 6 inches
(15 cm) on the sides and rear of the system, for
ventilation purposes.
Make sure that you have enough room to open the
compact disc compartment easily.
Place the loudspeakers at a reasonable distance on either
side of the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers
are placed at an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the Micro component system
Find that the remote control is no longer operating
correctly
When replacing the batteries, use a new set of batteries
and never mix alkaline and manganese batteries.
1 Place your thumb on the position marked on the battery
compartment cover (rear of the remote control) and push the
cover in the direction of the arrow.
2 Insert two AAA, LR03 or equivalent batteries, taking care to
respect the polarities:
+ on the battery against + on the remote control
on the battery against on the remote control
3 Replace the cover by sliding it back until it clicks into position.
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must
check the voltage.
1 Plug the main lead (marked AC CORD on the rear of the
system) into an appropriate socket.
2 Press the On/Standby button to switch your Micro component
system on.
Where to Install Your Micro-Component System
Inserting Remote Control Batteries
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
Repeat
Repeat A B
Preset EQ +10 (CD)
Record
PTY
Display
Star/Stop
Band
PRO./Set
CD Synchro
Connecting Your System to the Power Supply
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Samsung Manuals