Instructions Getting to know your camera Use this camera in the following order Set up the camera driver Take a picture Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.100) Take a picture. (p.19) Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ● Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ● Leaking, overheating, or burst battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. ● Remove the battery when not planning to use the camera for a long period of time.
Contents 024 Using the camera buttons to set the camera 045 Quality / Frame rate 024 POWER button 046 Metering 024 SHUTTER button 046 Drive mode 024 ZOOM W / T button 047 ISO 026 Face recognition(FR) button 048 White balance 027 Info / Up button 049 Exposure compensation 027 Macro / Down button 049 Long Time shutter 029 Focus lock 050 Movie Clip frame stabiliser 029 Flash / Left button 031 Self-timer / Right button 050 Using the LCD monitor to adjust the camera settings 0
Contents PLAY 055 Beep Sound 063 055 AF sound 063 Movie clip capture function On camera movie trimming 055 Setup menu 064 Playing back a recorded voice 056 Setup menu 1 064 Playing back a voice memo 056 File name 065 LCD monitor Indicator 057 LANGUAGE 065 Using the camera buttons to set the camera 057 Setting up the Date / Time / Date type 065 Thumbnail / Enlargement button 057 World Time 067 Info / Up button 058 Imprinting the recording date 067 Play & Pause / Down button 0
Contents 075 E (Effect) button : FUN 091 Important notes 075 Cartoon 092 Warning indicator 076 Preset focus frames 093 Before contacting a service centre 077 Composite image 095 Specifications 079 Photo Frame 080 Sticker 080 Setting up the play back function using the LCD monitor 098 Software Notes 098 System Requirements 082 Starting the slide show 082 Start the slide show 100 Setting up the application software 082 Selecting Images 102 Starting PC mode 083 Configure slide show ef
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case User manual, Product warranty DPOF compatible printer (see p.85) Camera strap Software CD (see p.99) Computer (see p.103) PictBridge compatible printer (see p.88) SD/SDHC memory card / MMC (see p.
Identification of features Front & Top Shutter button Power button FR (Face Recognition) button Flash AF sensor/Self-timer lamp Speaker Microphone Lens 《8》
Identification of features Back Camera status lamp Zoom T button (Digital zoom) Zoom W button (Thumbnail) M (Mode) button LCD monitor Eyelet for camera strap E (Effect) button 5-function button Fn/Delete button Play mode/Print button 《9》
Identification of features Bottom 5 Function button Battery holder Memory card slot Information / Up button MENU/OK button Self-timer / Right button Flash / Left button Battery chamber Battery chamber cover USB/AV connection terminal Tripod socket ※ To open the battery chamber cover, slide it in the direction shown above.
Identification of features ■ Self-timer lamp Icon Status Blinking Blinking Blinking Blinking Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source You should use the rechargeable battery SLB-0837(B) supplied with the camera. Be sure to charge the battery before using the camera. Battery life / Number of images ■ SLB-0837(B) rechargeable battery Specification Model Type Capacity Voltage SLB-0837(B) Lithium Ion 800mAh 3.7V Charging time (When the camera is turned off) Approx. 150 MIN ■ Number of images and battery life : Using the SLB-0837(B) Battery life / Number of images Still image 《12》 Approx. 100 MIN / Approx.
Connecting to a Power Source You can charge the rechargeable battery SLB-0837(B) by using the SAC-45 KIT which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2). When the SAC-45 and SUC-C2 are combined, they can be used as an AC cable. ● Using an AC cable : Connect the AC adapter to the USB cable. It can be used as a power cable. Important information about USB cable usage. ● Use a USB cable (SUC-C2) with the correct specification.
Connecting to a Power Source ■ How to charge the rechargeable battery (SLB-0837B) ■ Charging LED of the AC Adapter Charging LED Being Charged Charging is complete Green LED is on Charging error Red LED is off or blinking Being discharged Charging LED Red LED is on (Using the AC adapter) Orange coloured LED is on - If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. This is because of the low battery capacity.
Connecting to a Power Source Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not force it. This may cause damage to the battery - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card ● Be sure to format the memory card (see p.61) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). Card pins When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. ① No. ⑳ Description Icons Page 7 Contrast p.51 8 Sharpness/Mic. Off p.51/53 p.19/51 ⑲ 9 Auto Focus Frame ② ⑱ 10 Camera shake Warning ③ ⑰ 11 Date / Time ④ ⑯ 12 Exposure compensation / LongTime Shutter ⑤ ⑮ 13 White Balance p.48 ⑥ ⑭ 14 ISO p.47 ⑦ ⑬ 15 Drive mode / Stabiliser p.46/50 ⑧ ⑫ 16 Metering p.46 17 Image Quality / Frame Rate p.45 18 Image Size p.
Changing the recording mode Starting the recording mode You can select the desired working mode by the M (mode) button located on the back of the camera. Auto, Program, movie clip, ASR, scene (night, portrait, children, landscape, close-up, text, sunset, dawn, backlight, fireworks, beach & snow, Self-shot, Food, Cafe) camera modes are available. How to use the Auto mode ■ Selecting the camera mode 1. Insert the battery (p.15). 2. Insert the memory card (p.15).
Starting the recording mode How to use the Program mode How to use the ASR mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions. 1. Select the Program mode by pressing the M (Mode) button (p.33). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Starting the recording mode How to use the Movie clip mode Pausing while recording a movie clip (Successive Recording) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. 1. Select the Movie clip mode by pressing the M (Mode) button.(p.
Starting the recording mode How to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the M (Mode) button (p.33). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button to capture an image. ■ The scene modes are listed below.
Things to Watch Out for When Taking Pictures ● Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] ● Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny. - If the subject is moving at high speed.
Using the camera buttons to set the camera ZOOM W / T button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. POWER button Used for turning the camera’s power on / off.
ZOOM W / T button ■ WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Face recognition(FR) button This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. ※ Selectable modes : Auto, Program, ASR, Scene modes (Portrait, Children, Beach & Snow, Self-shot, Cafe) 1. Press the FR (Face Recognition) button ( ) in the selectable modes. The FR icon will be displayed on the screen left side. 2. The size and position of the auto focus frame is set at the face of the subject automatically.
Info ( Macro ( ) / Up button While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the image information. Info ( ) / Down button While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below.
Macro ( ) / Down button ■ Types of focus mode and focus range (W : Wide, T : Tele) Mode Focus Type Focus range Mode Focus Type Auto ( Super macro ( ) Super macro ( ) ■ Available focusing method, by recording mode (● : Selectable, ∞ : Infinity focus range) ) Auto macro ( ) W : 5 ~ Infinity T : 40 ~ Infinity W:1~5 (Wide only) (Unit : cm) Normal Mode ● W : 80 ~ Infinity T : 80 ~ Infinity Program ( ) Macro ( ) Normal Mode Focus Type Focus range W:1~5 (Wide only) Super macro ( W:1~5 (Wide on
Focus lock Flash ( To focus on a subject not positioned in the centre of the picture, use the focus lock function. When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH button. ■ Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway.
Flash ( ) / Left button ● If you press the shutter button after selecting the Auto, Fill-in, Slow synchro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. ● Using the flash frequently will reduce the life of the battery. ● Under normal operating conditions the re-charging time for the flash is usually within 4 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button Self-timer ( ■ Available flash mode, by recording mode ● ● ● ● ● (●: Selectable) ● ● ● ● ● ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image.
Self-timer ( ) / Right button ■ Selecting the self-timer 1. Select a RECORDING mode with the exception of VOICE RECORDING mode. (p.33) 2. Press the SELF-TIMER ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor. •10SEC self-timer ( ): Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
MENU / OK button M (Mode) button ■ MENU button You can select the desired recording mode. - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected.
E (Effect) button It is possible to add special effects to your images by using this button. ■ Still image mode : You can select the colour, special colour, image editing and Fun menu. In the Auto mode, you can select the [COLOR] menu only. ■ Movie clip mode : You can select the colour menu.
E (Effect) button : Colour By using the camera’s digital processor, it is possible to add special effects to your images ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image. Custom Color ■ Press the E button in an available recording mode. (p.
E (Effect) button : Colour Mask With this menu, you can select a part you want to highlight. The rest of the image will be black and white. ■ Press the E button in an available recording mode. (p.34) Color Mask Press the OK button and the Mask mark will be displayed on the LCD monitor. Press the Fn button. You can change the size and location of the mask.
E (Effect) button : Saturation You can change the saturation of the image. ■ Press the E button in an available recording mode. (p.34) IMAGE ADJUST Move Saturation E Exit Select Saturation menu ( ) and a bar for changing the saturation will be displayed. Change the saturation by pressing the Left/Right button.
E (Effect) button : FUN Cartoon You can add a text box on the image to make the image cartoon like. ■ Press the E button in an available mode. (p.34) FUN Press the Fn button and select a desired text box position by pressing the Left/Right button Cartoon Select Cartoon ( Move ) Select a desired frame by pressing the Left/Right button and press the OK button. EE Exit Frame OK E Set Select the text box position of the third image with the same procedure and take the third image.
E (Effect) button : FUN ■ Before saving the cartoon image, you can take images again. 1. Select an image to delete by using the Left/Right button. 2. Press the Fn button and the image deletes. Pressing the Fn button SH Capture Move OK Save Fn Delete 3. To take a new image, press the Shutter button.
E (Effect) button : FUN Pre-set focus frame You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. ■ Moving and changing the focus frame You can change the focus frame after selecting a Range menu. ■ Press the E button in an available recording mode. (p.34) Pressing the Fn button FUN High light SH Capture Fn E Edit SH Capture [Point the camera towards the subject and compose the image by using the LCD monitor.
E (Effect) button : FUN Composite shooting ※ Selecting 2 composite shots You can combine 2 - 4 different shots in a still image. Pressing the shutter button ■ Press the E button in an available recording mode. (p.34) SH Capture SH Capture [Ready for taking] Composite FUN Fn Delete [First shot] Pressing the shutter button Move E Set Composite OK EE Exit Pressing the OK button 1. Select a desired menu by pressing Left/Right button and press the OK button.
E (Effect) button : FUN ■ Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will be displayed. To delete a previously taken image, press the Fn button again. ■ Changing a part of composite shot after taking the last shot 1. After taking the last shot, a cursor to select a frame will appear.
E (Effect) button : FUN Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. ■ Press the E button in an available recording mode. (p.34) FUN Photo Frame Move Frame EE Exit OK E Set Pressing the OK button 2. The selected photo frame will be displayed. Press the shutter button to take a picture.
Fn button How to use the Fn menu You can use the Fn button to set the following menus. (●: Selectable) Page Size ● ● ● ● ● p.45 Quality/ Frame Rate ● ● ● ● ● p.45 ● p.46 ● *1● Metering ● Drive ● ISO ● White Balance ● EV ● LT Stabilisation p.46 p.47 ● p.48 ● p.49 *2● p.49 ● 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up / Down button. And then a sub menu will display on the left bottom side of the LCD monitor.
Size Quality / Frame rate You can select the image size appropriate for your application. You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Metering Drive mode If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can select continuous shot, and AEB (Auto Exposure Bracketing). [Multi] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image METERING area. This is suitable for general use.
Drive mode ● It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur. ● In the Wise shot mode, the shutter speed value shown on the LCD monitor may be different to the actual shutter speed. ● If 7MP or 6MW image size is selected, the Wise Shot menu can't be selected. ■ How to use the wise shot 1. Select the ASR mode bu pressing the mode button. 2. Select the wise shot menu in the [DRIVE] menu. 3.
White balance The white balance control allows you to adjust the colours to appear more natural. [Auto WB] : The camera automatically selects the appropriate white balance settings, depending on the prevailing WHITE BALANCE lighting conditions. [Daylight] : For taking images outside. Auto WB [Cloudy] : For taking images under a cloudy and overcast sky. [Fluorescent_H] : For shooting under daylight fluorescent types of threeway fluorescent lighting.
Exposure compensation Long Time shutter This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. ■ Compensating Exposure ■ Changing the Shutter speed and Aperture value 1.
Movie Clip frame stabiliser Using the LCD monitor to adjust the camera settings This function helps stabilize images captured during movie recording. You can select this menu only in the MOVIE CLIP mode. If the memory card is not inserted, this function will not operate. You can use the menu on the LCD monitor to set up recording functions. ■The items indicated by Menu [Off] : Movie clip frame stabilizer function is disabled. [On] : Prevents camera shake during movie recording.
Sharpness You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Auto Focus type RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record ◀ Back Soft+ Soft Normal Vivid Vivid+ OK Set You can select your preferred Auto Focus type according to the shooting conditions.
Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) Voice Recording RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record ◀ Back Off On OK Set Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released.
Voice Recording Recording the movie clip without voice ■ Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. You can record the movie without voice. 1. Press the Pause button ( ) to pause REC SH Stop recording. [Pausing the voice recording] 2. Press the Pause button ( ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again.
Sound menu Sound ( In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. Volume ■The items indicated by Mode Menu are default settings. Sub Menu Available Mode Page Off Volume Low Medium ) You can set select a volume of start up sound, shutter sound, beep sound and AF sound. - [Volume] sub menu : [Off], [Low], [Medium], [High] p.
Sound ( ) Setup menu Beep Sound If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. - [Beep Sound] sub menu : [Off], [Sound 1, 2, 3] SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound ◀ Back In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode.
Setup menu Menu tab Imprint LCD AF Lamp Start Image (Setup menu 2) Sub menu Main menu World Time (Setup menu 1) Setup menu 1 ( Okhotsk Wellington, Auckland Samoa, Midway Honolulu, Hawaii Alaska LA, San Francisco Denver, Phoenix Chicago, Dallas New York, Miami Caracas, La Paz Newfoundland Buenos Aires Mid-Atlantic Cape Verde - Off Date Date&Time - Dark Normal Bright - Off On Off Logo User Image - File name This function allows the user to select the file naming format.
Setup menu 1 ( ) LANGUAGE World Time There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. The date and time selected in the [Date&Time] serve as the date and time of your present location. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.
) Imprinting the recording date Auto Focus lamp There is an option to include DATE / TIME on still images. You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file.
Setup menu 2 ( ) Quick view Auto power off If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off] - Sub menus [Off] : The quick view function can’t be activated. [0.
Setup menu 2 ( ) Selecting Video out type - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
Setup menu 2 ( ) Formatting a memory Initialisation This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. - Sub menus [No] : The memory will not be formatted.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). 2.
Starting play mode Movie clip capture function On camera movie trimming You can capture still images from the movie clip. You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. ■ How to capture the movie clip 1. Press the Play / Pause button while playing the movie clip. Then press the E button. 2. The paused movie clip is saved in a new file name.
Starting play mode Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the Left/Right button. 2. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again. Play - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing, press the Left button. To fast forward the voice file, press the Right button.
LCD monitor Indicator Using the camera buttons to set the camera The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ④ ③ ② ① Thumbnail ( ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ⑤ ⑥ ■ Thumbnail display ⑦ ⑬ ⑫ ⑪ ⑩ ⑨ ⑧ No.
Thumbnail ( ) / Enlargement ( ■Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor.
Info( ) / Up button Play & Pause ( When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info ( Info ( ) button ) button Info ( ) / Down button In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left / Right / Menu / OK button Delete ( LEFT / RIGHT / MENU / OK buttons activate the following. This deletes images stored on the memory card. - LEFT button : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, the RIGHT button operates as a direction button. While the menu is not showing, press the RIGHT button to select the next image.
E (Effect) button : Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the E button. 2. Press the Left / Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. - The resized image will have a new file name. The [Start Image] image is stored not on the memory card but on the internal memory.
E (Effect) button : Rotating an image E (Effect) button : Colour You can rotate the stored images by various degrees. It is possible to add colour effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button. 1. Press the play mode button and press the E button. 2. Select menu tab by pressing the Left / Right button.
E (Effect) button : Colour E (Effect) button : Special Colour 1. Press the play mode button and press the E button. 2. Select ( ) menu tab by pressing the Left/Right button. ■ Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image.
E (Effect) button : Special Colour Colour mask With this menu, you can select a part you want to highlight. The rest of the image will be in black and white. SPECIAL COLOR Color Mask Select and a mark for selecting part will display. Move E Press the OK button and you can set the size and location of the part. Exit OK Set E Move Back OK Set TW Size W / T button : Changing size of part Move Press the OK button twice and the colour mask image will be saved as a new file name.
E (Effect) button : Image editing Brightness control 1. Press the play back button and press the E button. 2. Select menu tab by pressing the Left/Right button. You can change the brightness of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name. Red eye Removal Red eye effect can be removed from the captured image.
E (Effect) button : Image editing Saturation control You can change the saturation of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the saturation will be displayed. 2. Change the saturation by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name. Saturation Move OK Set Noise Effect You can add noise to an image to add a more classic feel to your photo. 1.
E (Effect) button : FUN Cartoon You can add a text box on the image to make the image cartoon like. ※ The cartoon image is saved as 1M image size. Select a desired position by pressing the Up/Down/Left/Right button and press the OK button. Cartoon FUN Select Cartoon ( Move ) Frame EE Exit OK E Set EE Back Move OK E Set Change the location of the text box by pressing the Left/Right button. Press the OK button and the image is saved. Press the OK button again to open a new image to save.
E (Effect) button: FUN ■ Before saving the cartoon image, you can change the selected image. Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1. Pressing the Fn button deletes the images in order. 2. Press the OK button and you can select images. High Light FUN Pressing the Fn button OK Save Fn E Delete Move OK Search 3.
E (Effect) button: FUN Composite image ■Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left/Right button and press the OK button. 2. Move the location of the frame by pressing the Up/Down/Left/Right button. 3. Press the OK button and the file is saved as a new file name. High Light Range Pressing the OK button OK E Set You can combine 2 - 4 different shots in a still image.
E (Effect) button: FUN ※ Selecting 2 composite shots ■ Before selecting the last composite image, you can change a part of composite image. 1. During the composite image editing, press the Fn button. 2. A previous image will be deleted. Press the OK button and you can select a new image. After selecting an image, press the Fn button again and the image will be deleted again.
E (Effect) button: FUN Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. FUN Photo Frame Move EE Exit Frame OK E Set Select a desired sub menu by pressing the Up/Down/Left/Right button. - Press the E button and the frame will be canceled. Press the OK button and the image is saved.
E (Effect) button : FUN Setting up the play back function using the LCD monitor Sticker PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. You can add various stickers to the image.
Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu Type Menu tab Main menu Images Size Layout Sub menu Secondary menu One Pic - All Pics - Auto - PostCard - Page p.
Starting the slide show ( ) Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [SLIDE SHOW] menu tab. Start the slide show The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] SLIDE SHOW menu and press the Right button. Show Play Image Repeat Play 2.
Starting the slide show ( ) Configure slide show effects Setting play interval Unique screen effects can be used for the slide show. Set the slide show play interval. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. 3. Press the OK button to confirm the setting. SLIDE SHOW Show Image Effect Interval Music ◀ Back Off Basic Classic Memories Rhythmic Deilght OK Set 1.
Playback ( ) Voice memo Deleting images You can add your voice to a stored still image. This deletes images stored on the memory card. PLAYBACK Veice Memo Delete Protect DPOF Copy to Card ◀ Back Off 끄기 On OK 정지00:00:00 Set [Voice memo menu] SH REC [Ready for recording] 정지00:00:05 SH Stop [Voice is recording] - Press the shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds.
Playback ( ) Protecting images DPOF This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ■DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. 1. Press the Up / Down button and select the [Protect] menu tab. And then press the Right button. 2.
Playback ( ) ■ Standard ■ Index This function allows you to embed printing quantity information on a stored image. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will display. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up / Down / Left / Right : Select an image to print.
Playback ( ) ■ Print size Copy To Card You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button agian and select the [Size] sub menu will dispaly. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button.
Playback ( ) ● When this menu is selected without inserting a memory card, the [No Card] message will be displayed. ● If there is not enough space available in the memory card to copy saved images in the internal memory (19 MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.
PictBridge PictBridge : Picture Selection ※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do the step 1 and 2 again. You can select images you want to print ■ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily.
PictBridge : Print Setting PictBridge : Reset You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Initialises user-changed configurations. 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the desired menu, and then press the Right button. 3. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.
Important notes Be sure to observe the following precautions! ● This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes Warning indicator ● Camera Maintenance There are several warnings that may appear on the LCD display. - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator Before contacting a service centre [ File Error! ] Please check the following ㆍFile error → Delete the file ㆍMemory card error → Contact a camera service centre [ Low Battery! ] ㆍThere is low battery capacity → Insert fresh batteries. [ Low Light! ] ㆍWhen taking pictures in dark places → Take pictures in Flash Photography mode. The camera doesn’t switch on ㆍThere is low battery capacity → Insert fresh batteries. (p.15) ㆍBattery is inserted incorrectly with the polarities reversed.
Before contacting a service centre Camera does not take images when pressing the Shutter button The flash does not fire ㆍThere is insufficient memory capacity → Delete unnecessary image files ㆍThe memory card has not been formatted → Format the memory card (p.61) ㆍThe memory card is exhausted → Insert a new memory card ㆍThe memory card is locked → Refer to [Card Locked!] error message ㆍThe camera's power is off → Turn the camera power on ㆍThe battery is exhausted → Insert fresh batteries (p.
Before contacting a service centre Specifications Images are too bright Image Sensor ㆍExposure is excessive → Reset exposure compensation No image on external monitor - Type : 1/2.5" CCD - Effective Pixel : Approx. 8.2 Mega-pixel - Total Pixel : Approx. 8.3 Mega-pixel Lens - Focal Length : NV Lens f = 6.3 ~ 18.
Specifications Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, - Movie Clip ·With Audio or without Audio Slow sync, Flash off, Red-eye Fix - Range : Wide : 0.2m ~ 3.0m, Tele : 0.5m ~ 2.5m (recording time : memory capacity dependent) - Recharging Time : Approx. 4 sec ·Size : 800x592, 720x480, 640x480, 320x240 Sharpness - Soft+, Soft, Normal, Vivid, Vivid+ ·Frame rate : 30 fps, 20 fps, 15 fps Color Effect - Normal, B&W, Sepia, Red, Blue, Green, Negative, ·Optical Zoom up to 3.
Specifications - Capacity (256 MB Size) Weight - 110g (without batteries and card) Operating Temperature Super Fine 57 68 84 93 172 558 Fine 103 115 134 158 265 663 Normal 180 206 233 271 425 742 ※ These figures are measured under Samsung standard conditions and may - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader vary depending on shooting conditions and camera settings.
Software Notes System Requirements Please ensure that you read the instruction manual carefully before use. - The attached software is a camera driver and image editing software tool for Windows. - Under no circumstances should all or part of either the software or the user manual be reproduced. - Copyrights for software are licensed only for use with a camera. - In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ● Be sure to check the system requirements before installing the driver. ● You should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not appear, run the [Windows Explorer] and select [Installer.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will display. Click the [Install] menu in the Auto run frame. 2.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Setting up the application software ● If you have installed the camera driver, the [Found New Hardware Wizard] may not open. ● On a Windows 98SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. ● PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer.
Starting PC mode ■ Connecting the camera to a PC ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. 5. Click a folder where you want to paste the file. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. 《104》 - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.
Removing the removable disk ■ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ME/XP/Vista 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.0 ~ 10.4. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start → Programs → Samsung → Samsung Master → Samsung Master]. ■ Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button.
Samsung Master ■ Image viewer : You can view the stored images. ■ Image edit : You can edit the still image. ① ⑥ ⑤ ① ④ ⑦ ② ③ ④ ② ③ - Image viewer functions are listed below. ① Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window : You can select the desired images in this window. ③ Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Samsung Master ■ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ※ Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. ※ Refer to the [Help] menu in Samsung Master for further information. ① ② - Movie clip edit functions are listed below. ① Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ When the movie clip doesn’t play back on the PC ※ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ■ When codec for play back the movie clip isn’t installed → Install the codec as listed below. [Installing codec for Windows] 1. Installing the XviD codec 1) Insert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.2-01112006.exe file.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS GmbH OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8222, 8488, 8490 FAX : (82) 31-740-8398 www.samsungcamera.com ZENTRALE, KEINE REPARATUR AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS, GERMANY TEL : 49 (0) 6196 66 5303 FAX : 49 (0) 6196 66 5366 TECHNISCHE SERVICE HOTLINE : 00800 4526 3727 (nur kostenfrei fur Anrufe aus Deutschland) SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
