User manual
English - 30
Audio Format: MPEG/Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the
decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker
function.
While viewing a Digital channel, this function can be selected.
You can only select the language among the actual languages being broadcast.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplier.
The +, – and MUTE buttons do not operate when the “TV Speaker” is set to “Off”.
When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) and “Sound Reset” in Sound
menu.
TV's Internal Speakers Audio Out (Optical, L/R Out) to Sound System
RF AV, S-Video
Component, PC, HDMI
RF AV, S-Video
Component, PC, HDMI
TV Speaker On
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
TV Speaker Off
Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal
Mute Mute Mute Mute Mute Mute
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Sound Reset: Reset All/Reset Sound Mode/Cancel
You can restore the Sound settings to the factory defaults.
➣
➣
➣
➣
Selecting the Sound Mode
You can set the sound mode in the “Tools” menu. When you set to “Dual I II”, the current
sound mode is displayed on the screen.
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Dual I II”.
3. Press the ◄ or ► button to select required option.
4. Press the ENTER button.
Audio Type Dual 1/2 Default
A2 Stereo
Mono MONO
Automatic change
Stereo STEREO ↔ MONO
Dual DUAL 1 ↔ DUAL 2 DUAL 1
NICAM
Stereo
Mono MONO
Automatic change
Stereo MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
➣
➣
➣
Tools
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll ◄ Mono ►
Move Adjust
e
Exit
BN68-01412L-01ENG.indb 30 2008-05-02 ¿ÀÈÄ 5:51:03