User manual

English - 9
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
You can also display the guide menu simply by pressing the GUIDE button. (To congure the Default Guide, refer to the
descriptions.)
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which
may be scrolled forwards or backwards in time.
Mini Guide
The information of each programme is displayed by each line on the current channel Mini Guide screen from the current
programme onwards according to the programme starting time order.
Default Guide→Mini Guide / Full Guide
You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control is
pressed.
GuideType→Guide/Auto
You can decide whether to display either the built-in Guide or the downloaded Guide when the GUIDE button on the remote control
is pressed.
Guide
Set the built-in guide to be displayed when the GUIDE button on the remote control is pressed.
Auto
Set the TV to select the proper Guide automatically when the GUIDE button on the remote control is pressed.
Channel List
For the detailed procedures on using the Channel List, refer to the page 10.
You can select these options by simply pressing the CH LIST button on the remote control.
Channel Mode
When press the P > / < button, Channels will be switched within the selected channel mode.
Added Ch.
Channels will be switched within the memorized channel list.
Favourite Ch.
Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
To reset the ne-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER E button.
Only Analogue TV channels can be ne tuned.
LNA(LowNoiseAmplier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplier boosts the
incoming signal).
While viewing an Analogue channel, this function can work.
❑
O


❑
❑


❑
O
❑


❑
N
N
N
❑
N
N
BN68-01564M-X0Eng.indd 9 2009-04-11 �� 1:45:59