User manual

English - 15
BlueOnlyMode→Off/On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
Blue Only Mode is available when the picture mode is set to Movie or Standard.
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
Viewing Picture-in-Picture
You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching the main picture.
Press the TOOLS button to display the Tools menu. You can also congure PIP related
settings by selecting Tools→PIP.
You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
PIP
Main picture Sub picture
Component 1, 2
HDMI 1, HDMI2, HDMI3/DVI, HDMI 4
PC
TV
PIP→Off/On
You can activate or deactivate the PIP function.
Size→ Õ / à / À / Œ
You can select a size of the sub-picture.
Position→ – / à / œ / —
You can select a position of the sub-picture.
In Double ( Œ , À ) mode, Position cannot be selected.
Air/ Cable
Selects either Air or Cable as the input source for the sub-screen.
Channel
You can select the channel for the sub-screen.
SoundSelect→Main/Sub
You can listen to the sound of the sub (PIP) picture.
Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools→PIP→
Sound Select.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens
on your PC will probably be different, depending upon your particular version of Windows
and your particular video card. However, even if your actual screens look different, the
same basic set-up information will apply in almost all cases. (If not, contact your computer
manufacturer or Samsung Dealer.)
1.
First, click on ‘Control Panel’ on the Windows start menu.
2.
When the control panel window appears, click on ‘Appearance and Themes’ and a
display dialog-box will appear.
3.
When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
4.
Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution): Optimum-1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click
‘OK’ and exit the dialog box.
■
N
❑
N
¦
T
N
❑



N



●
●
¦
●
●
Melody : Medium
Energy Saving : Off
PIP     ►
Setup
PIP
PIP : On ►
Size : Õ
Position : Ã
Air/Cable : Air
Channel : Air 6
U Move E Enter R Return
BN68-01564M-X0Eng.indd 15 2009-04-11 �� 1:46:00