User manual
English - 7
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the POWER button on the remote control. The message Select the OSD
Language.is displayed. Press the ENTER
E
button. Select the appropriate language by
pressing the ▲ or ▼ button. Press the ENTER
E
button to conrm your choice.
2.
Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to Home Use mode for the best picture in
your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return
to Home Use (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for 5
seconds.
3.
Press the ▲ or ▼ button to select Air,Cable or Auto, then press the ENTER
E
button.
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
4.
Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
Press the ENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the message Set the Clock Mode. is displayed.
5.
Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If you select Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock.
6.
The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTER
E
button.
7.
The message Enjoy your TV. is displayed. Press the ENTER
E
button.
Even if the ENTER
E
button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1.
Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER
E
button.
2.
Press the ENTER
E
button again to select Plug & Play.
3.
Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, use the Change PIN function. (refer to page 20)
The Plug & Play feature is only available in the TV mode.
¦
N
N
N
●
●
●
●
●
●
N
N
N
N
N
N
N
N
Plug & Play
Language :
中文
English
Enter
Move
Select the OSD Language.
BN68-01564M-X0Eng.indd 7 2009-04-11 �� 1:45:59