User guide

2
Connecting the Power
The label maker is powered by a rechargeable, lithium-ion (Li-ion) battery pack.
Inserting the Battery
The battery pack included with your label maker comes partially charged.
Make sure the charging adapter is disconnected before handling the
Li-ion battery pack.
To insert the battery
1 Slide the battery compartment cover
away from the label maker. See
Figure 1.
2 Insert the battery into the battery
compartment as shown in Figure 1.
3 Replace the battery cover.
Make sure to read the Li-ion Safety
Precautions found on "Safety Precautions
for Lithium-ion Rechargeable Battery Pack" on page 8.
Removing the Battery
Remove the battery pack if the label maker will not be used for a long period
of time.
Make sure the charging adapter is disconnected before handling the
Li-ion battery pack.
To remove the battery
1 Unplug the charging adapter.
2 Slide the battery compartment cover away from the label maker.
See Figure 1.
3 Remove the battery from the battery compartment.
Make sure to read the Li-ion Safety Precautions found on page 8.
Figure 1