User guide

6
To install the software on a Mac OS
®
system
1 Download the latest version of DYMO Label software from the DYMO Web
site at lm280.dymo.com.
2 Double-click the Installer icon and follow the on-screen instructions.
Connecting the Label Maker to Your Computer
The label maker connects to your computer using the USB connection located
on the top of the label maker.
Do not connect the label maker to your computer until after the
software installation is complete.
To connect the label maker to your
computer
1 Plug the USB cable into the USB port
on the top of the label maker. See
Figure 6.
2 Plug the other end of the USB cable
into an available USB port on your
computer.
3 If necessary, press to turn on the
label maker.
Figure 6