User Manual
42
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
―
Game Setting 1, Game Setting 2, and Game Setting 3 saved under Save Settings will not be changed.
Information
View the current input source, frequency and resolution.
Game
Picture
OnScreen Display
System
Information
Information
Exit
HDMI1
****x****
** kHz ** Hz
Black Equalizer
Off12 120 On
Response Time Refresh Rate FreeSync Low Input Lag
Picture Mode: Custom
Hz
LS *********
S/N :*************
―
The displayed image may differ depending on the model.