USER MANUAL Gaming Monitor F24G3*T* F27G3*T* The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited.
Table of contents Before Using the Product Safety Precautions Electricity and Safety Installation Operation 4 4 5 6 Cleaning 8 Correct posture to use the product 8 Connecting and Using a Source Device Installing the Software Read below before connecting the product.
Table of contents Specifications General 31 Standard Signal Mode Table 32 Appendix Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others 34 34 34 34 FreeSync (for AMD graphics card) 35 3
Chapter 01 Before Using the Product Safety Precautions Electricity and Safety Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Installation Warning Caution •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• Do not drop the product while moving. •• Do not install the product in poorly ventilated spaces such as a bookcase or closet. •• Install the product at least 10cm away from the wall to allow ventilation. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Centre for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Centre. •• Do not let children hang from the product or climb on top of it.
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. • Do not hold the product upside-down or move it by holding the stand. ‒ The product may fall and become damaged or cause an injury. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Cleaning Correct posture to use the product High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ――Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects. There is a risk of damaging the screen. ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Chapter 02 Preparations Installation Attaching the Stand (F27G3*T*) 1 2 3 1 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. If Styrofoam is unavailable, use a thick sitting mat. 4 2 Place the stand neck on the display, as shown in the figure. When you place the stand neck, ensure that the two guides on the stand neck can be inserted into the groove of the display.
Removing the Stand Precautions for moving the product ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. 1 1 • (F27G3*T*) (F24G3*T*) Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. If Styrofoam is unavailable, use a thick sitting mat. Remove the 6 screws from the base with a screwdriver as shown in the figure.
Checking the space around the product HAS Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause re and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. The exterior may differ depending on the product. 10 cm 130 110 The height of the monitor can be adjusted. - Up/down adjusting height: 130.0±5.0 (F27G3*T*) - Up/down adjusting height: 110.0±5.0 (F24G3*T*) - Slip Up/Down Spec:5.
Anti-theft Lock Wall Mount Kit Specifications (VESA) ― An anti-theft lock allows you to use the product securely even in public places. ― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces ― The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided other than plaster board, please contact your nearest dealer for additional information.
Control Panel Parts Description This LED is power status indicator and works as Power On (Power button): On The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Power saving mode: Blinking Power LED Power Off (Power button): Off The power Indicator operation can be swapped by changing in the menu. (System Power LED On) Actual models because of functional variation maybe haven’t this function.
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Ports 1 Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. ― The functions available may vary depending on the product model.
Connecting and Using a PC Connection Using an DP Cable Select a connection method suitable for your PC. DP Connection Using the HDMI Cable HDMI ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the picture quality. ― Use a VESA certified DP 1.2 cable or higher and its gender.
Connecting the Power Earphone Holder DP IN 2 HDMI IN DP IN D-SUB IN DC 14V 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the 1 Pull out the headphone holder. 2 Next, Put the headphones on. button at the bottom of the product to turn it on. The input voltage is switched automatically.
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. ― If you want to set the optimum resolution for your computer, please refer to (Q&A) → “How can I change the resolution?” ― To enable the maximum refresh rate, set Refresh Rate to 144 Hz.
Chapter 04 Menu ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Display 2nd Brightness 3rd Description You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. ― This menu is not available when Eye Saver Mode is enabled. Contrast Adjust the contrast between the objects and background.
Language 2nd Language 3rd Description Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. ――It will not be applied to other functions on your PC.
Game mode 2nd OD 3rd Description Activate OD function Inactivate OD function Select the preferred aim point style. Crosshair FreeSync Premium FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution. For more information, see FreeSync (for AMD graphics card) page. MPRT Open MPRT Close MPRT The MPRT function will be turned on when the resolution is greater than 85Hz.
Mode 2nd Standard 3rd Description This menu provides an optimum picture quality suitable for the environment where the product will be used. • Standard: Select this mode when the surroundings are bright. Cinema • Cinema: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue. FPS • FPS: Increase the brightness of darker areas of the FPS (First-Person Shooter) game screen. This mode increases visibility of your enemies during a FPS (First-Person Shooter) game.
Color 2nd 3rd Description Adjust the tint of the screen. Cool Warm When the external input is connected through HDMI/DP and PC/AV Mode is set to AV (720P @ 60Hz and 1080P @ 60Hz). Color Tone: Select a colour tone that best suits your viewing needs. When the external input is connected through HDMI/DP and PC/AV Mode is set to AV (720P @ 60Hz and 1080P @ 60Hz). User Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the colour.
Aspect 2nd Aspect 3rd Description Select the best screen size and ratio. ――This menu is not available when FreeSync is enabled. In PC mode • Auto: Display the picture according to the aspect ratio of the input source. • 16:9: Display the picture with an aspect ratio of 16:9. • 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
Input 2nd Input 3rd Description VGA (Analog) signal input. HDMI (Digital) signal input. Display port (Digital) signal input.
Other 2nd Off Timer 3rd Description Activate the function of timed switch-off. Inactivate the function of timed switch-off. ― 4 hours automatic shutdown. Gamma Adjust the middle level of luminance. Gamma 1 / Gamma 2 Volume Adjust the Volume controlling the button UP/DOWN. Access the Volume control screen, then increase or decrease the Volume. Adjust Auto Adjust: Automatically adjust the horizontal / vertical location focusing and clock of pictures. Auto Color: Adjust the white balance of pictures.
Reset 2nd 3rd Reset Description Return all the settings for the product to the default factory settings. Exit 2nd Exit 3rd Description Exit from the whole menu.
Chapter 05 Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. Easy Setting Box enables users to use the product by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung website (http://www. samsung.com).
Chapter 06 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Product diagnosis (Screen issue) If a problem occurs with the monitor screen, run Self Diagnosis to check that the monitor is working properly.
The message Check the cable connection and the settings of the source device. appears. Text is blurry. Check that the cable is properly connected to the product. If the monitor is in HDMI or DisplayPort mode, press the button to display the Function Key Guide If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel → Fonts → Adjust ClearType text and change Turn on ClearType. screen and select the → Input → VGA/HDMI/DisplayPort . Video playback is choppy.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. ――The path to the settings depends on the installed OS. How can I change the frequency? Set the frequency on your graphics card. •• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •• Windows 8(Windows 8.
Chapter 07 Specifications General Model Name F24G3*T* F27G3*T* Size 24 Class (23.8 Inches / 60.4 cm) 27 Class (27 Inches / 68.6 cm) Display area 527.04 mm (H) x 296.46 mm (V) 597.888 mm (H) x 336.312 mm (V) Pixel Pitch 0.2745 mm (H) x 0.2745 mm (V) 0.3114 mm (H) x 0.3114 mm (V) Maximum Pixel Clock 384 MHz 384 MHz Power Supply AC100-240V~ 50/60Hz Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
Standard Signal Mode Table Model Name F24G3*T* F27G3*T* Synchronization (PANEL Spec) Vertical Frequency 48 - 144 Hz 48 - 144 Hz Resolution Optimum resolution 1920 x 1080 @ 144 Hz 1920 x 1080 @ 144 Hz Maximum resolution 1920 x 1080 @ 144 Hz 1920 x 1080 @ 144 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted.
Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 1280 x 1024 63.981 60.020 108.000 +/+ O O O VESA, 1280 x 1024 79.976 75.025 135.000 +/+ O O O VESA, 1440 x 900 55.935 59.887 106.500 -/+ O O O VESA, 1600 x 900 60.000 60.000 108.000 +/+ O O O VESA, 1680 x 1050 65.290 59.954 146.250 -/+ O O O VESA, 1920 x 1080 67.500 60.000 148.500 +/+ O O O VESA, 1920 x 1080 137.280 120.000 285.
Chapter 08 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician •• External impact or drop. in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
FreeSync (for AMD graphics card) FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card. •• Off: Disable FreeSync. •• On: Turn on the AMD graphics cards' FreeSync function.