User manual
Table Of Contents
Installing the Product 2-2
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the
110V or 220V wall outlet.
(The input voltage is switched automatically.)
• You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to
install separate speakers for your computer.)
• If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen, check to see if the monitor
status is set to analog. Press [ ] button to have the monitor double-check the input signal source.
Use a general monitor in the following cases.
• When using a single display
• When playing a 3D game
• When watching a BluRay or HD video
• For laptop, "LCD+CRT Dual View" mode must be selected first before the multi-monitor configuration.
• Press the Fn + F4( ) key combination once.
• Then the 'Easy Display Manager'screen appears in which you can select a display device. Whenever you press the
F4( ) key while holding down the Fn key, the selected option is changed.