Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site EIRE U.K 0818 717 100 0845 SAMSUNG (7267864) www.samsung.com/ie www.samsung.com/uk LCD TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No. BN68-01962L-00 BN68-01962L_Cover.
Information on Use English Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
English Trademark & Label License Notice TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Symbol Note One-Touch Button TOOL Button Press © 2009 Samsung Electronics Co., Ltd. All rights reserved. BN68-01962L_Eng.
Contents English Getting Started 6 Installing the Stand 6 Disconnecting the Stand 7 Installing the Wall Mount Kit 7 Assembling the Cables 7 Anti-Theft Kensington Lock 8 Securing the Installation Space 9 Securing the TV to the Wall 10 Accessories 11 Viewing the Control Panel 12 Viewing the Connection Panel 14 Connections 15 Installing Batteries in the Remote Control 16 Viewing the Remote Control Basic Operation 17 Placing Your Television in Standby Mode 17 Plug & Play Feature 18 Viewing t
44 Connecting Anynet+ Devices 45 Setting Up Anynet+ English Anynet+ 45 Switching between Anynet+ Devices 47 Recording 47 Listening through a Receiver (Home Theatre) 48 Troubleshooting for Anynet+ Other Information 49 Teletext Feature 50 Using Your TV as a Computer (PC) Display 51 Troubleshooting: Before Contacting Service Personnel 52 Specifications Warning! Important Safety Instructions Wiring the Mains Power Supply Plug (UK Only) Warranty Card BN68-01962L_Eng.
English Getting Started Installing the Stand Getting Started Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only. 1 Attach your LCD TV to the stand. ■ Two or more people should carry the TV. ■ Make sure to distinguish between the front and back of the stand when assembling them. ■ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
Installing the Wall Mount Kit Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Remove the stand and cover the bottom hole with a cap and fasten with two screws. ■ Getting Started ■ English Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items.
Securing the Installation Space English Getting Started Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept. ■ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
Securing the TV to the Wall Getting Started 1 English Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
Accessories English ■ Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Getting Started Remote Control & Batteries (AAA x 2) Power Cords Cover-Bottom Cleaning Cloth (M4 X L16) User Manual Stand Screw X 4 Holder-Wire Cable (Depending on the model) ■ The items colour and shape may vary depending on the model.
Viewing the Control Panel 11 The product colour and shape may vary depending on the model. The front panel buttons can be activated by touching it with your finger. English ■ ■ Press to change channels. In the on-screen menu, use the z buttons as you would use the ▼ and ▲ buttons on the remote control. Getting Started Press to increase or decrease the volume. In the on-screen menu, use the Y buttons as you would use the ◄ and ► buttons on the remote control. Press to turn the TV on and off.
Viewing the Connection Panel English ■ The product colour and shape may vary depending on the model. 1 2 34 Getting Started # 1 2 34 2 # @ 2 @ ! 0 9 8 7 6 5 ! 0 9 8 7 6 5 1 COMPONENT IN Connects Component video / audio. 2 HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN Connects to the HDMI jack of a device with an HDMI output. ■ No sound connection is needed for an HDMI to HDMI connection. ■ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
EXT 1 EXT 2 Video O O Input Audio (L / R) O O RGB O X Getting Started Connector 13 English 6 H(HEADPHONE) Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. ■ Using the sound function is restricted when connecting headphones to the TV. ■ Prolonged use of headphones at a high volume may damage your hearing. ■ You will not hear sound from the speakers when you connect headphones to the TV.
Connections English Best 14 OPTICAL (Digital) Analog Audio connection Normal Getting Started Using a Audio Cable AUDIO (Analog) Amplifier / DVD Home Theater AUDIO IN Digital Audio connection Using an Optical Cable Digital Audio System OPTICAL HD connection Using a D-Sub Using an HDMI Cable Cable HDMI OUT HD connection Using D-Sub Cable Using anaHDMI/DVI Cable AUDIO OUT DVI OUT Using Cable Using a a D-Sub D-Sub Cable AUDIO OUT BN68-01962L_Eng.
Installing Batteries in the Remote Control 3 Replace the cover. ■ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.
Viewing the Remote Control English ■ ■ ■ You can use the remote control up to a distance of about 23 feet from the TV. The performance of the remote control may be affected by bright light. The product colour and shape may vary depending on the model. Getting Started Selects the TV mode directly. (p. 33, 49) Turns the TV on and off. Press to change the channel. Performs the same function as the ENTERE button of the directional buttons.
Basic Operation 17 English Placing Your Television in Standby Mode 1 2 Press the POWERP button on the remote control. ■ The screen is turned off and a red standby indicator appears on your set. To switch your set back on, simply press the POWERP button again. ■ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
English Basic Operation 1 2 3 Press the MENU button. Press the ▲ or ▼ button to select Setup, then press the ENTERE button. Setup 18 If you want to reset this feature... Plug & Play Language Time Game Mode Child Lock Change PIN Parental Lock Subtitle Press the ENTERE button again to select Plug & Play. Enter your 4 digit PIN number. ■ The default PIN number of a new TV set is ‘0-0-0-0’. ■ If you want to change PIN number, use the Change PIN function.
Using the Menus 19 English Viewing the Menus MENU button Display the main on-screen menu. Using the Menus Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. RETURN button Return to the previous menu. ENTERE / Direction button Move the cursor and select an item. Select the currently selected item. Confirm the setting.
Channel 20 Option English Auto Store Description ❑ Air / Cable Using the Menus Antenna source to memorize ■ Digital & Analogue: Digital and Analogue channels. ■ Digital: Digital channels. ■ Analogue: Analogue channels. When selecting Cable → Digital & Analogue or Cable → Digital: Provide a value to scan for cable channels. ■ Search Mode → Full / Network /Quick ■ Quick Network ID: Displays the network identification code. Frequency: Displays the frequency for the channel.
4 5 6 7 8 9 Channel 0 Option 21 Description The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. English Full Guide / Mini Guide / Default Guide ❑ Full Guide Using the Menus ■ You can also display the guide menu simply by pressing the GUIDE button.
Channel 22 Option English Channel List Description Using this menu, you can add / delete or set favourites channels and use the programme guide for digital broadcasts. ❑ All Channels Shows all currently available channels. Using the Menus ❑ Added Channels Shows all added channels. ❑ Favourites ■ You can select these options by simply pressing the CH LIST button on the remote control. ■ To select the favourites channels you have set up, press the FAV.CH button on the remote control.
Channel Option ❑ Timer Viewing ■ Only memorized channels can be reserved. Using the Menus If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first. ■ You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. ■ Reserving a programme will be shown in the Programmed menu.
Picture Menu Mode Using the Menus Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R) Advanced Settings Description Selects the type of picture settings that best correspond to your viewing preferences or requirements. Presets a higher brightness, contrast, and sharpness to the picture. ■ Dynamic Recommended for use in bright room conditions. ■ Standard Recommended for use in a normal viewing condition. ■ Natural Adds more punch and contrast to the image than the Standard mode.
Picture Option BN68-01962L_Eng.indd 25 ■ Advanced Settings is available in Standard or Movie mode. ■ In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance from among the Advanced Settings items. ■ Colour is available when Colour Space is set to Custom. ■ In Colour, you can adjust the RGB values for the selected colour. ■ To reset the adjusted RGB value, select Reset.
Picture 26 Option English Picture Options Using the Menus BN68-01962L_Eng.indd 26 Description ■ Size Changes the screen shape in terms of height and width. Also known as Aspect Ratio. Auto Wide: Enables the correct picture size to match the original video signal. 16:9: Sets the picture aspect ratio to fill the screen. Wide Zoom: Enlarges the middle part of the picture. Zoom: Magnifies the picture contents horizontally and vertically.
Picture Option Picture Reset 27 ■ Blue Only Mode is available when the picture mode is set to Movie or Standard. Using the Menus Picture (In the PC mode) Option Auto Adjustment Screen BN68-01962L_Eng.indd 27 English Picture Options Description ■ Blue Only Mode Helps to adjust the colour and tint controls when used with colour bar test patterns. Recommended for qualified picture alignment specialists only. Available only when the Picture Mode is set to Movie or Standard.
Sound Menu Mode Using the Menus Equalizer SRS TruSurround HD Audio Language Audio Format Audio Description Auto Volume Speaker Select BN68-01962L_Eng.indd 28 Description ■ Standard: Selects the normal sound mode. ■ Music: Emphasizes music over voices. ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voice over other sounds. ■ Custom: Recalls your customized sound settings. The sound settings can be adjusted to suit your personal preferences.
Selecting the Speaker Mute Sound Output Mute Mute Sound Option Sound Reset Using the Menus TV Speaker External Speaker Video No Signal 29 English RF / AV / Component / PC / HDMI Sound Output Audio Out (Optical, L/R Out) to Sound System RF / AV / Component / PC / HDMI Sound Output TV’s Internal Speakers Sound Reset Description You can restore the Sound settings to the factory defaults. Reset Sound Mode: Current sound values return to default settings. Cancel sound reset.
Setup Menu Language Time Description You can set the menu language. Plug & Play Setup English Setup Option Language ❑ Clock Using the Menus Setting the clock is necessary in order to use the various timer features of the TV. If you disconnect the power cord, you have to set the clock again. ■ Clock Mode You can set up the current time manually or automatically. Auto: Set the current time automatically using the time from the digital broadcast.
Setup Option Change PIN Parental Lock > Parental Rating Subtitle BN68-01962L_Eng.indd 31 ■ Restrictions on game mode (Caution) To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. Game Mode is not available in regular TV, PC and Ext mode. ■ If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and connect external devices.
Setup 32 Option English Teletext Language Preference Using the Menus Digital Text Melody Energy Saving Common Interface BN68-01962L_Eng.indd 32 Description You can set the Teletext language by selecting the language type. ■ English is the default in cases where the selected language is unavailable in the broadcast.
Input Menu 33 BN68-01962L_Eng.indd 33 Source List Edit Name ■ Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button. Using the Menus Edit Name Input Source List Description Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. ■ TV / Ext.1 / Ext.
Support menu Self Diagnosis Using the Menus Software Upgrade BN68-01962L_Eng.indd 34 Description ■ Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. Therefore, contact Samsung’s call centre for assistance. No: If the test pattern is properly displayed, select No.
Support Option Description HD Connection Guide This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV. View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method. Contact Samsung BN68-01962L_Eng.
Media Play - USB Device 36 English Connecting a USB Device Media Play - USB Device 1 2 3 TV Side Panel Press the POWER button to turn the TV on. Connect a USB device containing photo and/or music files to the USB jack on the side of the TV. USB Drive When the Application selection screen is displayed, press the ENTERE button to select Media Play (USB). Using the Remote Control Button in Media Play Menu Button ▲/▼/◄/► ENTERE ∂/∑ RETURN TOOLS ∫ π/μ INFO MEDIA.
Media Play Function 37 English This function enables you to view and listen to photo and/or music files saved on a USB Mass Storage Class (MSC) device. ■ It might not work properly with unlicensed multimedia files. Entering the Media Play (USB) Menu Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2 Press the ▲ or ▼ button to select Media Play (USB), then press the ENTERE button. ■ The Media Play (USB) menu is displayed.
English Media Play - USB Device 1 View Groups: The sort group where the currently selected file is contained is highlighted. 2 Currently selected file: The selected file is the file you can now control. Photo file are displayed as thumbnail images. 3 Current Device: Shows the currently selected device name. Press the Red button to select a device. ■ Red (Device) button: Selects a connected device. 4 Item Selection Information: Shows the number of files that are selected by pressing the Yellow button.
Viewing a Photo or Slide Show Viewing a Slide Show Press the ▼ button to select the File List Section. 1 2 Press the TOOLS button. 5/15 1231.jpg 1232.jpg 1233.jpg Slide Show Play Current Group Information Remove Safely 1235.jpg 1234.jpg 1236.jpg 1237.jpg ../Photo/ SUM Select T Tools R Upper Folder Device ▶ Normal 1234.jpg 580x765 2008/12/02 5/15 Media Play - USB Device Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.
Alternatively 40 English 1 2 3 Media Play - USB Device 1 2 In the File List Section, press the Yellow buttons to select the desired photos. Press the TOOLS button. Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button. ■ The selected files will be used for the Slide Show. Slide Show Option Menu During a slide show (or when viewing a photo), press the TOOLS button to set the option. Press the ▲ or ▼ button to select the desired option, then press the ENTERE button.
Sorting the Music List 4 Press the MEDIA.P button. 5 1 Energetic Press the ◄ or ► button to select Music, then press the ENTERE button. Lies Press the ◄ or ► button to select the desired Music file. ■ Selecting Multiple Music Files Press the ◄ or ► button to select the desired music file. Then press the Yellow button. Repeat the above operation to select multiple music files. The mark c appears to the selected music file.
Music Play Control Buttons 42 English Button ENTERE ∂ ∑ ∫ TOOLS Operations Play/Pause the music file. Play the music file Pause the music file Exit play mode and return to the music list. Run various functions from the Music menus. Media Play - USB Device Music Function Information Icon p q 1 2 3 When all music files in the folder (or the selected file) are repeated. Repeat Mode is On. When all music files in the folder (or the selected file) are played once. Repeat Mode is Off.
Using the Setup Menu 43 Press the MEDIA.P button. SUM Press the ◄ or ► button to select Setup, then press the ENTERE button. 851.86MB/993.02MB Free SETUP Press the ▲ or ▼ button to select the desired option. Press the ◄ or ► button to select the option. ■ To exit Media Play mode, press the MEDIA.P button on the remote control. Option Music Repeat Mode Screen Saver Run Time Information Remove Safely BN68-01962L_Eng.
English Anynet+ Connecting Anynet+ Devices Anynet+ What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV TV Anynet+ Device 1 HDMI 1.3 Cable Anynet+ Device 2 HDMI 1.3 Cable Anynet+ Device 3 HDMI 1.
Setting Up Anynet+ Description Setup Media Play (USB) Anynet+ (HDMI-CEC) Application Anynet+ ■ Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. ■ Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the TV is turned Off. The active source on the TV remote must be set to TV to use the Anynet+ function.
Anynet+ Menu English The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Option Description Anynet+ View TV Anynet+ mode changes to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g.
Recording 47 3 Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins. ■ When there is more than one recording device. When multiple recording devices are connected, the recording devices are listed. Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.
Troubleshooting for Anynet+ English Problem Possible Solution ● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ● Connect only one receiver (home theatre). ● Check if the Anynet+ device power cord is properly connected. ● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ● Check whether the TV remote control is in TV mode.
Other Information 49 English Teletext Feature 1 8 (store) Used to store the Teletext pages. 2 4 (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. 3 5 (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again.
Using Your TV as a Computer (PC) Display English Setting Up Your PC Software (Based on Windows XP) Other Information The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases.
● ● ● ● Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings. Check the volume. Normal picture but no sound ● Check the volume. ● Check whether the MUTEM button has been pressed on the remote control. ● Check the Speaker Select settings. Screen is black and power indicator light blinks steadily ● On your computer check; Power, Signal Cable. ● The TV is using its power management system.
Specifications English Other Information Model Name LE32B550, LE32B551 LE32B553, LE32B554 LE37B550, LE37B551 LE37B553, LE37B554 Screen Size (Diagonal) 32 inches 37 inches <1W <1W 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10W X 2 10W X 2 794 X 77 X 524 mm 794 X 240 X 570 mm 917 X 79 X 592 mm 917 X 255 X 658 mm 13 kg 16 kg Power Consumption Standby PC Resolution (Optimum) Sound (Output) Dimensions (WxDxH) Without Stand With stand Weight With Stand Environmental Considerations Operating Tem
Warning! Important Safety Instructions Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
● This product uses parts of the software from the Independent JPEG Group. ● This product uses parts of the software owned by the Freetype Project (www.freetype.org). ● This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@ samsung.com.
A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy.
The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
GNU Lesser General Public License (LGPL) Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works.
1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Korrekt avfallshantering av produkten (elektriska och elektroniska produkter) Denna markering på produkten, tillbehören och i manualen anger att produkten och de elektroniska tillbehören (t.ex. laddare, headset, USB-kabel) inte bör sorteras tillsammans med annat hushållsavfall när de kasseras. Till förebyggande av skada på miljö och hälsa bör dessa föremål hanteras separat för ändamålsenlig återvinning av beståndsdelarna.
Правилно третиране на изделието след края на експлоатационния му живот (Отпадъци, представляващи електрическо и електронно оборудване)(Важи за държавите на Европейския съюз и други европейски държави със системи за разделно сметосъбиране) Този знак, поставен върху изделието, негови принадлежности или печатни материали, означава, че продуктът и принадлежностите (например зарядно устройство, слушалки, USB кабел) не бива да се изхвърлят заедно с другите битови отпадъци, когато изтече експлоатационният му живот
Õige viis toote kasutuselt kõrvaldamiseks (elektriliste ja elektrooniliste seadmete jäätmed) Selline tähistus tootel või selle tarvikutel või dokumentidel näitab, et toodet ega selle elektroonilisi tarvikuid (nt laadija, peakomplekt, USBkaabel) ei tohi kasutusaja lõppemisel kõrvaldada koos muude olmejäätmetega.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
KKorrekt bortskaffelse af batterierne i dette produkt (Gælder i EU og andre europæiske lande med særlige retursystemer for batterier). Mærket på dette batteri, dokumentationen eller emballagen betyder, at batterierne i dette produkt efter endt levetid ikke må bortskaffes sammen med andet husholdningsaffald. Mærkning med de kemiske symboler Hg, Cd eller Pb betyder, at batteriet indeholder kviksølv, cadmium eller bly over grænseværdierne i EU-direktiv 2006/66.
Správná likvidace baterií v tomto výrobku (Platí v Evropské unii a dalších evropských zemích s vlastními systémy zpětného odběru baterií.) Tato značka na baterii, návodu nebo obalu znamená, že baterie v tomto výrobku nesmí být na konci své životnosti likvidovány společně s jiným domovním odpadem. Případně vyznačené symboly chemikálií Hg, Cd nebo Pb upozorňují na to, že baterie obsahuje rtuť, kadmium nebo olovo v množství překračujícím referenční úrovně stanovené směrnicí ES 2006/66.