Country Armenia AUSTRIA Azerbaijan Belarus BELGIUM CZECH DENMARK ESTONIA FINLAND FRANCE GERMANY Georgia HUNGARY EIRE ITALIA KAZAKHSTAN KYRGYZSTAN LATVIA LITHUANIA LUXEMBURG Moldova NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SLOVAKIA SPAIN SWEDEN Switzerland TADJIKISTAN U.K UKRAINE UZBEKISTAN Customer Care Centre 0-800-05-555 0810 - SAMSUNG (7267864, € 0.07/min) 088-55-55-555 810-800-500-55-500 Web Site www.samsung.com/at www.samsung.com/be (Dutch) 02-201-24-18 www.samsung.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital TV notice Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service.
Contents Getting Started 4 4 4 5 6 6 Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug & Play (Initial Setup) Connections 7 8 9 Connecting to an AV Device Connecting to an Audio Device Changing the Input Source Basic Features 9 10 10 12 13 16 18 21 How to Navigate Menus Using the INFO button (Now & Next guide) Planning Your Viewing Channel Menu Picture Menu Sound Menu Setup Menu Support Menu Advanced Features 22 22 23 29 36 39 Connecting to a PC Netw
Getting Started Accessories ✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. ✎✎The items’ colours and shapes may vary depending on the models. yy Remote Control & Batteries (AAA x 2) yy Owner’s Instructions yy Warranty Card / Safety Guide (Not available in some locations) yy Cleaning Cloth yy Power Cord (46 inch TV) yy Blanking Bracket yy Cable tie yy Holder-Ring (4ea) See separate guide for installing the stand.
01 Getting Started Viewing the Remote Control ✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and Volume buttons. Turns the TV on and off. (P. 6) Displays and selects the available video sources. (P.9) HDMI Selects the HDMI mode directly. (P. 7) Press to directly access to channels. Returns to the previous channel. Alternately select Teletext, Double or MiX. Cuts off the sound temporarily. Adjusts the volume. Changes channels.
Getting Started Connecting to an Antenna When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna. VHF/UHF Antenna Cable or R-AUDIO-L ANT OUT PR PB Y Power Input Plug & Play (Initial Setup) When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Plug & Play is available only when the Input source is set to TV.
Connections 02 Connections Connecting to an AV Device Using an HDMI / DVI Cable: HD connection (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB) DVD W Y W R W R B G HDMI OUT Red White AUDIO OUT W PR R-AUDIO-L R ✎✎HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN PR R-AUDIO-L PB PB PR R-AUDIO-L Y PB Y DVI OUT Y xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
Connections Connecting to an Audio Device Using an Optical or Audio Cable Connection Available devices: digital audio system, amplifier, DVD home theatre OPTICAL Digital Audio System R-AUDIO-L PR PB Y Headphone ✎✎DIGITAL AUDIO OUT (OPTICAL) xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
P.MODE Edit Name ■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. Source List Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
Basic Features Using the INFO button (Now & NextP.MODE guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. yy Scroll ◄, ► to view information for a desired programme while watching the current channel. yy Scroll ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button.
¦¦ Using Favourite Channels delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels or Scheduled screen. * My Channels c1 c2 Channels All Air TV 15 Radio Data/Other Analogue 3 23 33 32 5 4 27 Antena B Zoom (in Channel Manager) Shows all favourite channels. 1futech * 24ore.tv abc1 r BBC World bid-up.
Basic Features Channel Menu Manual Store Scans for a channel manually and stores in the TV. ¦¦ Retuning channels ✎✎If a channel is locked using the Child Lock function, Antenna (Air / Cable) t ■■ Digital Channel: When scanning has finished, channels are updated in the channel list. the PIN input window appears. Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
(in Channel Manager) Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button. Channel List Transfer Imports or exports the channel map. You should connect a USB storage to use this function. The PIN number input screen appears. Enter your 4 digit PIN number. ✎✎ ✎✎ The default PIN number of a new TV set is ‘0-0-0-0’. 2.
Basic Features ¦¦ Economical Solutions ■■ Shadow Detail (-2~+2): Increase the brightness of dark images. Disabled under PC mode. ✎✎ ■■ Gamma: Adjust the primary colour intensity. ECO Solution ■■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto) t : Adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
xx In PC mode, only 16:9 and 4:3 modes can be ✎✎In PC mode, you can only make changes to the Colour xx Settings can be adjusted and stored for each Tone, Size , and Auto Protection Time. external device connected to an input of the TV. xx If you use the Screen Fit function with HDMI 720p Picture Options Colour Tone : Normal Size : Auto Wide Screen Mode : 16:9 Digital Noise Filter : Auto MPEG Nosie Filter : Auto HDMI Black Level Film Mode : Normal : Off adjusted.
Basic Features ¦¦ Setting up the TV with Your PC ¦¦ Adjusting sound settings Set the input source to PC. Equalizer Auto Adjustment t Adjusts the sound mode. Adjust frequency values/positions and fine tune the settings automatically. ✎✎Not available when connecting through HDMI/DVI cable. Screen ■■ Balance L/R: Adjusts the balance between the right and left speaker. ■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
S.MODE (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. ■■ Audio Description (Off / On): Turn the audio description function on or off. ■■ Volume: Adjust the audio description volume. Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal.
Basic Features Setup Menu Volume: Set the desired volume level. ¦¦ Setting the Time Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Time Antenna (when the Source is set to TV): Select ATV or DTV. ■■ Clock: Setting the clock is for using various timer features of the TV. OO The current time will appear every time you press the INFO button.
✎✎ If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on). ¦¦ Other Features Language ■■ Menu Language: Set the menu language. ■■ Teletext Language: Set a desired language for teletext. ✎✎ English is the default in cases where the selected language is unavailable in the broadcast.
Basic Features ¦¦ Picture In Picture (PIP) 1. Press the button. Select a desired service by pressing the wheel (▲/▼/◄/►) and OKE buttons. ✎✎ If Auto Run Data Service is On, the data service PIP t Watches simultaneously the TV tuner and one external video source. PIP (Picture-in-Picture) does not function in the same mode. ✎✎NOTE xx If you turn the TV off while watching in PIP mode, the PIP window will disappear.
Installing the Latest Version Self Diagnosis Self Diagnostic might take few seconds, this is part of thenormal operation of the TV. ■■ Picture Test (Yes / No): Use to check for picture problems and if the problem continues to occur check the colour pattern. ■■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. ✎✎ If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu.
Advanced Features Connecting to a PC Using an HDMI/DVI Cable / a D-sub Cable DVI OUT R-AUDIO-L PR PB AUDIO OUT AUDIO OUT PC OUT Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution is 1920 X 1080 @ 60 Hz Mode IBM MAC VESA CVT VESA DMT VESA GTF VESA DMT / DTV CEA Resolution 640 x 350 720 x 400 640 x 480 832 x 624 1152 x 870 720 x 576 1152 x 864 1280 x 720 1280 x 960 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. ¦¦ Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below.
Advanced Features Network Setup (Auto) Network Setup (Manual) Use the Automatic Wired Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. How to set up automatically 1. Connect your TV to your LAN as described in the previous section. 2.
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below. ✎✎To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
Advanced Features Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such case, establish a connection using one of the following methods: Method 1 Connect using the USB right angle adapter Method 2 Connect via an extension cable or Network Setup (Samsung Auto Configuration) Network Setup (PBC (WPS)) This function is available in APs (Access Points) that support Samsung Auto Configuration.
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
Advanced Features Network Setup (Manual) SWL Connect If the Auto Setting does not work, you need to enter the Network setting values manually. You can directly connect a device that supports the PBC (WPS) to the TV. Getting the Network Connection Values To get the Network setting values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4.
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC. MODE 04 Advanced Features Media Play MediaPlay Videos Change Device SUM View Devices E Enter R Return ¦¦ Connecting a USB Device 1. Turn on your TV. TV Side Panel 2. Connect a USB device containing photo, music and/or movie files to the USB 1 (HDD) or USB 2 jack on the side of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
Advanced Features ✎✎Functions that are not supported when connecting to a PC through a network: xx The Background Music and Background Music Setting functions. xx Sorting files by preference in the Photo, Music, and Movie folders. xx The � (REW) or µ (FF) button while a movie is playing. ✎✎The Divx DRM, Multi-audio, embedded caption does not supported. ✎✎Samsung PC Share manager should be permitted by the firewall programme on your PC.
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is played. ✎✎Supports the Device Mode and Contents Mode in Media Play homepage. Information : You can ascertain the selected file name and the number of files and page. Videos Movie 01.avi Movie 03.avi Movie 05.avi Sort List Section : Displays sorting standard. Jan.10.2010 Jan.10.2010 Jan.10.2010 Movie 07.avi Movie 02.avi Movie 04.avi Movie 06.avi Movie 09.avi SUM A Jan.10.
Advanced Features yy Supported Video Formats File Extention *.avi *.mkv *.asf Container AVI MKV ASF *.wmv *.mp4 ASF MP4 Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Divx 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 Motion JPEG 800x600 6 ~ 30 8 Divx 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8 XviD 1920x1080 6 ~ 30 8 H.
If you exit the playing Videos function, it can be played later from the point where it was stopped. 1. Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the file list section. 2. Press the � (Play) / ENTERE button. 00:04:03 / 00:07:38 1/1 Movie 01.avi 3. Select Play Continuously (Resume Play) by pressing the Blue button. The Movie will begin to play from where it was stopped. ✎✎ The Blue button is available when resuming play. ✎✎ If the Cont.
Advanced Features ¦¦ Playing the multiple files Playing the selected video / music / photo files 1. Press the Yellow button in the file list to select the desired file. 2. Repeat the above operation to select multiple files. Videos ✎✎ NOTE 2 files selected /Movie 01.avi Movie 01.avi Movie 02.avi Jan.10.2010 xx The (c) mark appears to the left of the selected files. xx To cancel a selection, press the yellow button again. xx To deselect all selected files, press the TOOLS button and Jan.10.
During playing a file, press the TOOLS button. Option menu Operations Videos Title You can move the other file directly. ✓ Repeat Mode Picture Size (Mode1 / Mode2 / Original) Picture Setting You can play movie and music files repeatedly. ✓ You can adjust the picture size for preference. ✓ You can adjust the picture setting. (P. 13, 14, 15, 16) ✓ Sound Setting You can adjust the sound setting. (P. 16, 17) you can play the video file with Subtitle.
Advanced Features Anynet+ What is Anynet+? t Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to Home Theatre TV Home Theatre Optical Cable Anynet+ Device 1 Anynet+ Device 2, 3, 4 HDMI 1.3 Cable HDMI 1.3 Cable 1.
04 Advanced Features ¦¦ Setting Up Anynet+ ■■ Setup Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. + (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. ✎✎ When the Anynet Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. The active source on the TV must be set to TV to use the Anynet+ function. ✎✎ ✎✎ Even if an external device is still recording, it may turn off.
Advanced Features ¦¦ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. ✎✎ If your receiver supports audio only, it may not appear in the device list. ✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. ✎✎ When the receiver (i.
Message / Media / ScreenShare ¦¦ About AllShare AllShare connects your TV and compatible Samsung mobile phones / devices through a network. On your TV, you can view call arrivals, SMS messages and schedules set on your mobile phones. In addition, you can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. Additionally, you can use your TV for browsing web pages in your mobile phones.
Advanced Features Call Arrival Alarm Using ScreenShare Function If a call arrives while you are watching TV, the alarm window appears. Using ScreenShare, you can browse various web contents provided by the mobile phone. For example, the image below displays an access page for contents on a mobile. You can read the mobile’s files and view the phone book and calendar on the TV. Also, in the phone book, you can make a call to another person, or send to SMS.
Other Information The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. ✎✎You can change Teletext pages by pressing the numeric buttons on the remote control. 1 2 / (Teletext on/mix): Activate the Teletext mode after selecting the channel providing the Teletext service.
Other Information Installing the Wall Mount ¦¦ Assembling the Blanking Bracket When installing the TV onto a wall, attach the Blanking Bracket into the part that connects to the stand as shown in the picture. Blanking bracket ¦¦ Preparing before installing Wall-Mount (46inch TV) To install a wall-mount from another manufacturer, use the Holder-Ring. ¦¦ Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall.
✎✎Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎✎NOTE xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Other Information Anti-Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. 1 2 ✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. 1.
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) (P.
Other Information Issues Solutions and Explanations No Picture, No Video The TV will not turn on. • • • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. Make sure the wall outlet is working. Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below. The TV turns off automatically. • • • • Ensure the Sleep Timer is set to Off in the Setup menu. (P.
Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial setup) → ENTERE. You have intermittent loss of audio or video.
Other Information Specifications Panel native Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity TV System 1920 x 1080 @ 60 Hz 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing Analogue : Depending on your country selection Digital : DVB-T/DVB-C Analogue : PAL. SECAM, NT443 Digital : MPEG2, MPEG4 .... BG. OK NICAM. MPEGl Video : 1080/24p, 1080p, 1080i ....
A AllShare Amplify Antenna Anynet+ Audio Out Auto Adjustment Auto Volume F 39 16 12 36 8, 36 16 17 B Background Music Balance L/R Basic View Batteries Black Tone Blanking Bracket Brightness 35 16 34 5 14 42 13 C Cable Tie 43 Change PIN 6, 19 Channel Manager 11 Clock 18 Colour Tone 15 Component 7 Connecting to a PC 22 Connecting to an Audio Device 8 8, 36 35 23 13 14 E Eco Sensor Edit Name Editing Channels Energy Saving Equalizer External Speaker EPG R 11 15 13 14 12 H HDMI Headphones Home Theatre 7
This page is intentionally left blank. BN68-02689J_Eng.
Le figure e le illustrazioni presenti in questo Manuale dell’utente sono fornite unicamente a titolo di riferimento e possono differire da quelle del prodotto attuale. Le specifiche e il design del prodotto possono variare senza preavviso. Avviso relativo alla trasmissione TV digitale 1. 2. 3. 4. 5. 6.
Contenuti Per iniziare 4 4 4 5 6 6 Accessori Vista del Pannello di controllo Vista del telecomando Collegamento all’antenna Plug & Play (Impostazione iniziale) Collegamenti 7 8 9 Collegamento a un dispositivo AV Collegamento a un dispositivo audio Cambiare la sorgente di ingresso Funzioni base 9 10 10 12 13 16 18 21 Come scorrere i menu Uso del tasto INFO (Guida Now & Next) Pianificare la visione Menu Canale Menu Immagine Menu Suono Menu Impostazione Menu Supporto Funzioni avanzate 22 22 23 29 3
Per iniziare Accessori ✎✎Controllare che nella confezione del TV LCD siano contenuti i seguenti componenti. Se eventuali componenti risultassero mancanti, contattare il rivenditore. ✎✎La forma e il colore dei componenti possono variare in base al modello.
✎✎Questo speciale telecomando, progettato per aiutare chi ha problemi di vista, presenta punti in Braille sui tasti Power, Channel e Volume. Spegne e accendere il televisore. (P. 6) Visualizzazione e selezione delle sorgenti video disponibili. (P. 9) HDMI Seleziona direttamente la modalità HDMI. (P. 7) 01 Per iniziare Vista del telecomando Premere per accedere direttamente ai canali. Ritorna al canale precedente. Seleziona alternativamente le modalità Teletext, Double o Mix.
Per iniziare Collegamento all’antenna Quando il televisore viene acceso per la prima volta, le impostazioni di base vengono visualizzate automaticamente. ✎✎Preimpostato: Collegare l’alimentazione e l’antenna. Antenna VHF/UHF Cavo o R-AUDIO-L ANT OUT PR PB Y Ingresso Alimentazione Plug & Play (Impostazione iniziale) Alla prima accensione del televisore, vengono visualizzate alcune schermate che aiutano l’utente a configurare le impostazioni di base. Premere il tasto POWERP.
Collegamenti 02 Collegamenti Collegare un dispositivo AV Usare un cavo HDMI / DVI: Connessione HD (fino a 1080p) Dispositivi disponibili: DVD, lettore Blu-ray, ricevitore via cavo HD, ricevitore satellitare HD STB (Set-Top-Box), ricevitore via cavo, ricevitore satellitare (STB) DVD W Y W R W R B G HDMI OUT Red White AUDIO OUT W PR R-AUDIO-L PB PB PR DVI OUT R ✎✎HDMI IN 1(DVI), 2, 3, 4 / PC / DVI AUDIO IN PR R-AUDIO-L R-AUDIO-L Y PB Y Y xx Quando si effettua una connessione mediante
Collegamenti Collegamento di un dispositivo audio Uso di una connessione Ottica o un cavo audio Dispositivi disponibili: sistema audio digitale, amplificatore, DVD home theatre OPTICAL Sistema Audio Digitale R-AUDIO-L PR PB Y Cuffie ✎✎DIGITAL AUDIO OUT (OPTICAL) xx Quando un sistema audio digitale è collegato alla porta DIGITAL AUDIO OUT (OPTICAL), ridurre il volume sia del televisore sia del sistema. xx L’audio 5.
P.MODE Modifica Nome ■■ VCR / DVD / STB cavo / STB satellite / STB PVR / Ricevitore AV / Giochi / Videocamera / PC / DVI PC / Dispositivi DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Assegnare un nome al dispositivo collegato alle porte di ingresso per semplificare la selezione della sorgente di ingresso.
Funzioni base Uso del tasto INFO (Guida Now & P.MODE Next) Il display identifica il canale corrente e lo stato di determinate impostazioni audio e video. La guida Now & Next mostra le informazioni relative alla programmazione giornaliera di ogni canale in base all’orario di trasmissione. yy Scorrere ◄, ► per visualizzare le informazioni di un determinato programma durante la visione del canale corrente. yy Scorrere ▲, ▼ per visualizzare le informazioni relative ad altri canali.
¦¦ Uso dei Canali Preferiti Eliminare o impostare i canali preferiti e utilizzare la guida ai programmi per le trasmissioni digitali. Selezionare un canale nella schermata Canali, Miei canali o Programmato. * Miei canali Canali All Antenna ■■ ■■ c1 c2 TV 15 Radio Data/Other Analogue 3 23 33 32 5 4 27 Antena B Zoom Seleziona (in Gestione canali) Mostra tutti i canali preferiti. 1futech * 24ore.tv abc1 r BBC World bid-up.
Funzioni base Menu Canale ¦¦ Risintonizzazione dei canali Antenna (Antenna / Cavo) t Prima che il televisore inizi la memorizzazione dei canali disponibili, è necessario specificare il tipo di sorgente di segnale collegata al televisore (per es. un sistema via Antenna o Cavo). Nazione Viene visualizzata la finestra di immissione del PIN. Digitare il PIN a quattro cifre. ■■ Canale analogico: Cambiare la nazione per i canali analogici. Memoriz.
(in Gestione canali) Impostare ogni canale usando le opzioni del menu Gestione canali , Blocco / Sblocco, Timer Visione, Ordina, Elimina, Seleziona tutto / Deseleziona tutto). Gli elementi del menu Opzioni possono differire in base allo stato del canale. 1. Selezionare un canale e premere il tasto TOOLS. 2. Selezionare una funzione e cambiarne le impostazioni. ■■ Blocco / Sblocco: E’ possibile bloccare un canale in modo che non possa essere selezionato e visualizzato.
Funzioni base ¦¦ Soluzioni economiche ■■ Gamma: Per regolare l’intensità dei colori primari. Soluzione Eco ■■ Risp. energia (Off / Basso / Medio / Alto / Immagine Off / Auto)t: Questa funzione regola la luminosità del televisore in modo da ridurre il consumo di energia. Selezionando Immagine Off, lo schermo viene disattivato, ma l’audio rimane attivo. Per attivare lo schermo premere un tasto qualsiasi, eccetto il tasto di regolazione del volume.
xx A seconda del tipo di sorgente di ingresso, le opzioni ✎✎In modalità PC, è possibile modificare solo i parametri xx Le voci disponibili variano in base alla modalità Toni Colore Dimensioni e Ora Protezione Auto.
Funzioni base Reset immagine (OK / Annulla) ■■ Voce cristallina: Enfatizza le voci rispetto ad altri suoni. Ripristina la modalità corrente delle immagini ai valori predefiniti. ■■ Amplificazione: Aumenta l’intensità delle alte frequenze per offrire alle persone con deficit uditivo un ascolto migliore. ¦¦ Configurazione del televisore con il PC Impostare la sorgente di ingresso su PC.
(non disponibile in tutti i paesi) (solo canali digitali) Questa funzione gestisce il flusso audio per l’opzione AD (Audio Description), quando è trasmesso insieme all’Audio principale dall’emittente. ■■ Descrizione audio (Off / On): Attiva e disattiva la funzione Descrizione audio. ■■ Uscita SPDIF: SPDIF (Sony Philips Digital InterFace) è usata per fornire un audio digitale riducendo le interferenze agli altoparlanti e ai vari dispositivi digitali come per esempio un lettore DVD.
Funzioni base Menu Impostazione ¦¦ Impostazione dell’orario Ora ■■ Orologio: L’impostazione dell’ora serve per utilizzare le funzioni timer del televisore. OO L’ora corrente appare ogni volta che si preme il tasto INFO. ✎✎ Se il cavo di alimentazione viene scollegato, è necessario impostare nuovamente l’orologio. Modalità orologio (Automatico / Manuale) ✎✎ In base all’emittente e al segnale trasmesso, l’impostazione automatica dell’orario potrebbe non essere corretta.
✎✎ Qualora si sia dimenticato il codice PIN, premere i tasti del telecomando nella sequenza seguente per ripristinare il codice PIN predefinito “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on). ¦¦ Altre funzioni Lingua ■■ Lingua menu: Imposta la lingua dei menu. ■■ Lingua Teletext: Imposta la lingua desiderata per il servizio Teletext. ✎✎ La lingua predefinita è l’inglese, nel caso in cui la trasmissione non supporti la lingua selezionata.
Funzioni base ¦¦ PIP (Picture In Picture) ✎✎ PIP t Permette la visualizzazione contemporanea di un canale TV e di una sorgente video esterna. PIP (Picture-in-Picture) non funziona nella stessa modalità. ✎✎NOTA xx Spegnendo il televisore durante la visione in modalità PIP, la finestra PIP scomparirà. xx L’immagine nella finestra PIP potrebbe apparire leggermente innaturale quando si usa la schermata principale per visualizzare un videogame o il karaoke.
Installare la versione più recente Auto diagnosi La funzione di auto diagnosi potrebbe richiedere alcuni secondi; questa operazione rientra nel normale funzionamento del televisore. ■■ Test immagine (Sì / No): Usare questa funzione per verificare eventuali problemi di immagine; nel caso il problema persista, verificare la trama colori. ■■ Test audio (Sì / No): Usare a melodia predefinita per verificare eventuali problemi audio.
Funzioni avanzate Collegamento a un PC Uso di un Cavo HDMI/DVI / D-sub DVI OUT R-AUDIO-L PR PB AUDIO OUT AUDIO OUT PC OUT Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y Modalità di visualizzazione (ingresso D-Sub e HDMI/DVI) La risoluzione ottimale è 1920 X 1080 @ 60 Hz.
E’ possibile impostare il televisore in modo da poter accedere a Internet attraverso una LAN con un collegamento via cavo o wireless. ¦¦ Collegamento a una rete cablata Vi sono tre modi per collegare il televisore alla LAN via cavo: yy E’ possibile collegare il televisore alla LAN connettendo la porta LAN sul retro del televisore a un modem esterno mediante un cavo Cat 5. Vedere lo schema riportato sotto.
Funzioni avanzate Impostazione rete (Auto) Impostazione rete Manuale Durante la connessione del televisore a una rete che supporta il protocollo DHCP, configurare Impostazione rete su Auto. Per impostare automaticamente la connessione di rete via cavo del televisore, seguire questi passaggi: Configurare Impostazione rete su Manuale quando si collega il televisore a una rete che richiede un indirizzo IP statico.
Per collegare il televisore a una rete wireless, è necessario disporre di un router o di un modem wireless e di un adattatore LAN wireless Samsung (WIS09ABGN) da collegare al jack USB sul pannello posteriore o laterale del televisore. Vedere la figura riportata sotto. ✎✎Per utilizzare la funzione SWL (Samsung Wireless Link), collegarsi alla porta USB 1 (HDD).
Funzioni avanzate Avviso Quando il televisore è collegato a un adattatore Samsung Wireless LAN Adapter, alcuni canali potrebbero visualizzare le immagini in modo anomalo.
La maggior parte delle reti wireless dispongono di un ulteriore sistema di sicurezza che utilizza l’accesso alla rete tramite dispositivi per la trasmissione di un codice di sicurezza crittografato denominato Chiave di sicurezza o di accesso. La Chiave di sicurezza è basata su una passphrase, solitamente una parola o un codice alfanumerico di una determinata lunghezza richiesti al momento dell’impostazione della funzione di protezione della rete wireless.
Funzioni avanzate Impostazione rete (Manuale) Connessione SWL Se gli altri metodi non funzionano, digitare le impostazioni di rete manualmente. Al televisore è possibile collegare un dispositivo che supporta PBC (WPS). Ottenere le impostazioni per la connessione di rete Per ottenere le impostazioni per la connessione di rete sulla maggior parte dei computer basati su Windows, seguire questi passaggi: 1. Cliccare con il tasto destro del mouse sull’icona Rete in basso a destra dello schermo.
Godetevi le fotografie, la musica o i film salvati su un dispositivo USB Mass Storage Class (MSC) e/o sul PC. MODE 04 Funzioni avanzate Media Play MediaPlay Videos Nome Dispisitivo SUM Visual dispositivi E Conferma R Ritorna ¦¦ Collegamento di un dispositivo USB 1. Accensione del televisore. Pannello laterale del televisore 2. Collegare un dispositivo USB contenente foto, musica e/o filmati alla porta USB 1 (HDD) o USB 2 sul pannello laterale del televisore. 3.
Funzioni avanzate ✎✎Funzioni non supportate quando si effettua il collegamento a un PC tramite rete: xx Funzioni Background Music (Musica di sottof) e Background Music Setting (Impostazione musica di sottofondo). xx Ordinamento dei file in base alle preferenze nelle cartelle Photo (Foto), Music (Musica) e Movie (Film). xx Premere i tasti � (REW) o µ (FF) durante la riproduzione di un film. ✎✎Le didascalie incorporate, Divx DRM, Multi-audio, non sono supportate.
04 Funzioni avanzate ¦¦ Visualizzazione a schermo Posizionarsi sul file desiderato usando i tasti su/giù/sinistra/destra, quindi premere ENTERE o � (Riproduci). Il file selezionato verrà visualizzato. ✎✎Supporta Mod. dispositivo e Mod. contenuti nella homepage Media Play. Informazioni: E’ possibile verificare il nome del file selezionato e il numero di file e di pagine. Videos Movie 01.avi Movie 03.avi Movie 05.avi Sezione Elenco ordinamento: Visualizza lo standard di ordinamento. Movie 02.avi Jan.
Funzioni avanzate yy Formati video supportati Estensione file Codec Video Risoluzione Frame rate (fps) Bit rate (Mbsp) Divx 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8 XviD 1920 x 1080 6 ~ 30 8 H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 Contenitore *.avi *.mkv *.asf AVI MKV ASF *.wmv ASF *.mp4 MP4 *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg *.ts *.tp *.trp Motion JPEG 800 x 600 6 ~ 30 8 Divx 3.11 / 4.x / 5.1 / 6.
Se si interrompe la riproduzione video, la riproduzione può essere ripresa in seguito a partire dal punto in cui è stata interrotta. 1. Nella sezione elenco file, selezionare il filmato da riprodurre in modo continuo premendo il tasto ◄ o ►. 2. Premere il tasto � (Riproduci) / ENTERE 00:04:03 / 00:07:38 1/1 Movie 01.avi 3. Selezionare Ripr in continuo (Riprendi riproduzione) premendo il tasto blu. La riproduzione del filmato inizierà dal punto di arresto precedente.
Funzioni avanzate ¦¦ Riproduzione di più file Riproduzione di filmati/brani musicali/foto selezionati 1. Premere il tasto Giallo per selezionare il file desiderato tra quelli riportati in elenco. Videos File 2 sel.nati /Movie 01.avi 2. Ripetere l’operazione per selezionare più file. Movie 01.avi ✎✎ NOTA Movie 02.avi Jan.10.2010 Movie 03.avi xx Il simbolo (c) comparirà a sinistra dei file selezionati. xx Per annullare una selezione, premere nuovamente li tasto giallo.
Durante la riproduzione di un file, premere TOOLS. Categoria Operazioni Video Titolo E' possibile spostare l'altro file direttamente. ✓ Modalità Ripeti E’ possibile riprodurre ripetutamente i film o brani musicali. ✓ Formato immagine (Modalità 1 / Modalità 2 / Nativa) E' possibile regolare la dimensione dell'immagine in base alle proprie preferenze. ✓ Impostazioni immagine E' possibile regolare l'impostazione dell'immagine. (p.
Funzioni avanzate Anynet+ Che cos’è Anynet+? t Anynet+ è una funzione che permette di controllare mediante il telecomando del televisore Samsung tutti i dispositivi Samsung collegati che supportano Anynet+. Il sistema Anynet+ può essere usato solo con i dispositivi Samsung dotati della funzione Anynet+. Per controllare se il dispositivo Samsung in uso è dotato di questa funzione, verificare la presenza del logo Anynet+.
■■ Impostazione Anynet+ (HDMI-CEC) (Off / On): Per utilizzare la funzione Anynet+, Anynet+ (HDMI-CEC) deve essere impostata su On. + (HDMI-CEC) è disattivata, sono disattivate anche tutte le funzioni relative a Anynet+. ✎✎ Quando la funzione Anynet Spegnimento auto (No / Sì): Impostazione della disattivazione automatica di un dispositivo Anynet+ allo spegnimento del televisore. La sorgente attiva deve essere impostata sul telecomando in modo che il televisore utilizzi la funzione Anynet+.
Funzioni avanzate ¦¦ Ascolto tramite il ricevitore È possibile ascoltare l’audio tramite un ricevitore (per es. un Home Theatre) anzichè dagli altoparlanti del televisore. 1. Selezionare Ricevitore e impostarlo su On. 2. Premere EXIT per uscire. Se il ricevitore supporta solo l’audio, potrebbe non comparire nell’elenco dei dispositivi. Il ricevitore è operativo solo se è collegata in modo appropriato la porta Optical In del ricevitore alla porta DIGITAL AUDIO OUT (OPTICAL) del televisore.
Messag / Media / ScreenShare ¦¦ Informazioni su AllShare AllShare collega il televisore e il cellulare Samsung / i dispositivi compatibili attraverso una rete. Sul televisore è possibile visualizzare le chiamate in arrivo, gli SMS e i promemoria impostati sul proprio cellulare. Inoltre, è possibile riprodurre contenuti multimediali compresi video, foto e musica memorizzati sul proprio cellulare o su altri dispositivi (per es il PC) e controllarli sul televisore mediante la rete.
Funzioni avanzate Allarme chiamata in arrivo Uso della funzione ScreenShare Se arriva una chiamata mentre si guarda il televisore, viene visualizzata la finestra degli allarmi. Mediante ScreenShare, è possibile ricercare vari contenuti web forniti attraverso il cellulare. Ad esempio, l’immagine sotto visualizza una pagina di accesso per i contenuti provenienti da un cellulare. E’ possibile leggere i vari file contenuti nel cellulare e visualizzare la rubrica e il calendario sul televisore.
Altre informazioni La pagina dell’indice del servizio Teletext contiene informazioni sull’uso del servizio. Per visualizzare correttamente le informazioni del servizio Teletext, è necessario che la ricezione del canale sia stabile. In caso contrario, alcune informazioni potrebbero essere perse o alcune pagine potrebbero non essere visualizzate correttamente. ✎✎E’ possibile cambiare le pagine Teletext premendo i tasti numerici sul telecomando.
Altre informazioni Installazione del supporto a parete ¦¦ Montaggio della staffa preforata Durante l’installazione del televisore a parete, collegare la staffa alla parte che collega il piedistallo come mostrato nella figura. Staffa preforata ¦¦ Preparazione per l’installazione di un supporto a parete (per televisori da 46 pollici) Per installare un supporto a parete di un altra marca, utilizzare un anello di ritenuta.
✎✎Il kit di montaggio a parete non è fornito in dotazione ma è venduto separatamente. Installare il supporto su una parete solida perpendicolare al pavimento. Se il supporto deve essere fissato ad altri tipi di materiale, consultare il rivenditore di zona. Una installazione a soffitto o su pareti inclinate può provocare la caduta dell’unità e lesioni personali.
Altre informazioni Blocco antifurto Kensington Il blocco Kensington è un dispositivo usato per assicurare fisicamente il sistema quando viene utilizzato in un luogo pubblico. L’aspetto del dispositivo e il metodo di blocco possono variare in base alla marca del prodotto. Per informazioni sull’uso, consultare il manuale fornito insieme al blocco Kensington. 1 2 ✎✎Trovare l’icona “K” sul retro del televisore. L’alloggiamento del blocco 3 Kensington si trova di fianco all’icona “K”. 1.
In caso di domande sul funzionamento del televisore, consultare per prima cosa l’elenco sottostante. Se nessuno dei consigli sottoriportati si dimostra utile per risolvere il problema, visitare il sito ‘www.samsung.com’, quindi fare clic sulla voce Support (Assistenza), oppure chiamare il numero del Call Center riportato in ultima pagina.
Altre informazioni Problemi Soluzioni e spiegazioni Nessuna immagine, video spento Il televisore non si accende. • • • Il televisore si spegne automaticamente. • • • • Nessuna immagine/video. • • • • Verificare che la spina del cavo di alimentazione CA sia correttamente collegata a una presa a muro e il televisore sia acceso. Accertarsi che la presa a muro sia funzionante. Provare a premere il tasto POWER sul televisore per verificare che il problema non sia il telecomando.
Soluzioni e spiegazioni Le impostazioni andranno perse dopo 30 minuti o a ogni spegnimento del televisore. • Se il televisore è in modalità Demo Negozio, ogni 30 minuti verranno azzerate le impostazioni audio e immagine. Commutare la modalità Demo Negozio in Uso dom. secondo la procedura Plug & Play (Impostazione iniziale).
Altre informazioni Specifiche Pannello nativo Caratteristiche ambientali Temperatura di esercizio Umidità di esercizio Temperatura di stoccaggio Umidità di stoccaggio Sistema TV 1920 x 1080 @ 60 Hz 10°C a 40°C (50°F a 104°F) Da 10% a 80%, senza condensa -20°C a 45°C (-4°F a 113°F) Da 5% a 95%, senza condensa Analogico: In base al paese selezionato Digitale: DVB-T/DVB-C Analogico: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digitale: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 BG. OK NICAM.
A Aggiornamento software AllShare Altoparlante est Altoparlante TV Amplificazione Antenna Anynet+ Audio Out Auto diagnosi G 21 39 17 17 16 12 36 8, 36 21 B Batterie Bilan bianco Bilanciamento Blocco 5 14 16 13 Gestione canali Guida Now & Next R 11 10 H HDMI Home Theater 7, 36 8, 36 I Impostazione rete Incarnato Indicatore di alimentazione Informazioni sul segnale 24, 27 14 4 21 L Licenza Luminosità 47 13 C Caldo 15 Cambia PIN 6, 19 Canali preferiti 11 Collegamento di un dispositivo audio 8 Colle
50 BN68-02689J-Ita.indb 50 SCART1 LR SCART2 LR HDMI (4ea) PC/DVI Audio PC Component AV Ext2 Ext1 Tuner CI CVBS switch HDMI TMDS 4x1 SW RGB HV YPbPr CVBS CVBS SCART1 RGB DIF VAL_I2STX1_SPK SPDIF LVDS EMAC_PHY USB 2.
Questa pagina è stata lasciata intenzionalmente bianca. BN68-02689J-Ita.
Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts abweichen. Änderungen an Ausführung und technischen Daten vorbehalten. Hinweis zu Digitalfernsehen 1. 2. 3. 4. 5. 6.
Inhalt Erste Schritte 4 4 4 5 6 6 Zubehör Bedienfeld Fernbedienung Verbinden mit einer Antenne Plug & Play (Anfangseinstellung) Anschlüsse 7 8 9 Anschließen an ein AV-Gerät Anschließen an ein Audiogerät Signalquellen wählen 7 9 Grundfunktionen 9 Navigieren in den Menüs 10 Verwenden der INFO-Taste (Elektronische Programmzeitschrift) 10 Fernsehplanung 12 Kanalmenü 13 Bildmenü 16 Tonmenü 18 Einstellungsmenü 21 Unterstützungsmenü Erweiterte Funktionen 22 22 23 29 36 39 Anschließen an einen PC Netzw
Erste Schritte Zubehör ✎✎Überprüfen Sie die Verpackung Ihres LCD-Fernsehgeräts auf Vollständigkeit. Falls Komponenten fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung. ✎✎Die Farbe und die Form der Teile können sich je nach Modell unterscheiden.
✎✎Dies ist eine spezielle Fernbedienung für Personen mit eingeschränktem Sehvermögen. Die Netztaste sowie die Tasten zum Einstellen des Senders und der Lautstärke sind in Braille beschriftet. Ein- und Ausschalten des Fernsehgeräts. (Seite 6) HDMI-Modus direkt aufrufen. (P. 7) Anzeigen und Auswählen aller verfügbaren Videosignalquellen. (Seite 9) HDMI 01 Erste Schritte Fernbedienung Hiermit wechseln Sie direkt zu einem Kanal. Zurück zum vorherigen Kanal.
Erste Schritte Verbinden mit einer Antenne Wenn das Fernsehgerät zum ersten Mal eingeschaltet wird, werden automatisch die Grundeinstellungen vorgenommen. ✎✎Voreinstellung: Anschließen ans Stromnetz und an die Fernsehantenne. VHF/UHF-Antenne Kabel oder R-AUDIO-L ANT OUT PR PB Y netzanschluss Plug & Play (Anfangseinstellung) Wenn das Fernsehgerät erstmals eingeschaltet wird, helfen eine Reihe aufeinanderfolgender Abfragen beim Durchführen der Grundeinstellungen. Drücken Sie die POWERP.
Anschlüsse 02 Anschlüsse Anschließen an ein AV-Gerät Mit Hilfe eines HDMI/DVI-Kabels: HD-Anschluss (max. 1080p) Verfügbare Geräte: DVD, Blu-ray-Player, HD-Kabelreceiver, HD-Satellitenreceiver, Kabelreceiver, Satellitenreceiver DVD W Y W R W R B G HDMI OUT Red White AUDIO OUT W PR R-AUDIO-L R ✎✎HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN PR R-AUDIO-L PB PB PR R-AUDIO-L DVI OUT Y PB Y Y xx Eine Verbindung über HDMI/DVI-Kabel kann nur über HDMI IN 1(DVI) erfolgen.
Anschlüsse Anschließen an ein Audiogerät Mit Hilfe eines Glasfaserkabels oder eines Audiokabels Verfügbare Geräte: Digital-Audiosystem, Verstärker, DVD-Heimkino OPTICAL DigitalAudiosystem R-AUDIO-L PR PB Y Kopfhorer ✎✎DIGITAL AUDIO OUT (OPTICAL) xx Wenn ein Digital Audio-System mit dem DIGITAL AUDIO OUT (OPTICAL)-Anschluss verbunden ist, reduzieren Sie die Lautstärke von Fernsehgerät und System. xx 5.1-Kanalton ist möglich, wenn das Fernsehgerät an ein externes Gerät angeschlossen ist, das 5.
P.MODE Name bearbeiten ■■ Videorekorder / DVD / Kabelreceiver / Satellitenreceiver / PVR-Receiver / AV-Receiver / Spiel / Camcorder / PC / DVI PC / DVI-Geräte / TV / IPTV / Blu-Ray / HD DVD / DMA: Vergeben Sie Namen für die an die Eingangsbuchsen angeschlossenen Geräte, um die Auswahl der Signalquelle zu vereinfachen. Quellen Hiermit wählen Sie, ob das Fernsehgerät mit einem Fernsehsignal versorgt wird oder an andere externe Signaleingänge wie z. B.
Grundfunktionen Verwenden der INFO-Taste (Elektronische Programmzeitschrift) P.MODE Auf dem Bildschirm werden der aktuelle Kanal und bestimmte Audio/Video-Einstellungen angezeigt. Die elektronische Programmführer zeigt entsprechend der Sendezeit für jeden Kanal tagesaktuelle Fernsehprogramminformation an. yy Blättern Sie mit ◄, ►, um Informationen zu einem gewünschten Programm anzuzeigen, während Sie einen anderen Sender anzeigen. yy Blättern Sie mit ▲, ▼, um Informationen für andere Kanäle anzuzeigen.
¦¦ Verwenden von Favoriten Mit diesem Menü können Sie Favoriten löschen oder einstellen und den Programmführer für digitale Sendungen verwenden. Wählen Sie im Fenster Sender, Eigene Kanäle oder Vorgemerkt einen Sender. * Eigene Kanäle Sender Terrestrisch ■■ ■■ c1 c2 All 1futech * 24ore.tv TV 15 Radio Data/Other Analogue 3 23 33 32 5 4 27 TV-Empfang B Zoom abc1 r BBC World bid-up.
Grundfunktionen Kanalmenü ¦¦ Kanäle neu einstellen Antennentyp (Terrestrisch / Kabel) t Ehe Ihr Fernseher beginnen kann, die verfügbaren Kanäle zu speichern, müssen Sie die Art der Signalquelle angeben, die an das Fernsehgerät angeschlossen ist (z. B.: Terrestrisch oder Kabel). Sender manuell speichern Manuelle Suche nach einem Kanal und Speichern im Fernsehgerät. ✎✎Wenn ein Kanal mit der Kindersicherung gesperrt wurde, wird das Eingabefenster für die PIN geöffnet.
■■ Sperren / Freigabe: Sie können einen Kanal sperren, sodass er nicht ausgewählt und angezeigt werden kann. ✎✎HINWEIS xx Diese Funktion ist nur verfügbar, wenn die Kindersicherung aktiviert ist Ein. xx Der Eingabefenster für die PIN wird geöffnet. Geben Sie die vierstellige Standard-PIN ein: „0-0-0-0“. Ändern Sie die PIN mit der Option PIN ändern. ■■ Timer-Wiedergabe: Sie können einen Kanal einstellen, der bei Erreichen einer bestimmten Zeit automatisch angezeigt wird.
Grundfunktionen ¦¦ Möglichkeiten zum Sparen ■■ Gamma: Einstellen der Intensität der Primärfarbe. Öko-Lösung ■■ Energiesparmod. (Aus / Gering / Mittel / Hoch / Bild aus / Auto) t: Mit dieser Funktion stellen Sie die Helligkeit des Fernsehgeräts ein, um den Stromverbrauch zu senken. Wenn Sie Bild aus wählen, wird der Bildschirm abgeschaltet, aber der Ton bleibt an. Drücken Sie eine beliebige Taste außer der Lautstärketaste, um den Bildschirm wieder anzuschalten.
xx Je nach Signalquelle können die Bildgrößenoptionen ✎✎Im PC-Modus können Sie nur Farbtemp., Größe, xx Die verfügbaren Elemente können in Abhängigkeit vom Aktivierung, und Einbrennschutzes nach einstellen. Bildoptionen Farbtemp. : Normal Größe : Autom. Breit Bildschirmmodus : 16:9 Digit. Rauschfilter : Auto MPEG-Rauschfilter : Auto HDMI-Schwarzp. : Normal Filmmodus : Aus variieren. ausgewählten Modus variieren. xx Im PC-Modus können nur die Modi 16:9 und 4:3 eingestellt werden.
Grundfunktionen ¦¦ Einstellen des Fernsehgeräts mithilfe Ihres PCs Stellen Sie die Signalquelle auf PC ein. Autom. Einstellung t Stellen Sie die Frequenzen/Positionen ein und lassen Sie die Feinstellung automatisch durchführen. ✎✎Nicht verfügbar bei Anschluss mit einem HDMI/DVI-Kabel. Bildschirm ■■ Grob / Fein: Entferneb oder Reduzieren von Bildrauschen. Falls sich das Bildrauschen durch die Feinabstimmung allein nicht beheben lässt, stellen Sie zunächst die Frequenz möglichst genau ein Grob.
(nicht überall verfügbar) (nur Digitalkanäle) Diese Funktion verarbeitet den Audiostream für den Audiokommentar (Audio für Sehgeschädigte), der vom Sender zusammen mit dem Vordergrundton übertragen wird. ■■ Audio für Sehgeschädigte (Aus / Ein): Hiermit wird der Audiokommentar für Sehbehinderte ein- und ausgeschaltet. ■■ Lautstärke: Hiermit regeln Sie die Lautstärke des Audiokommentars für Sehgeschädigte.
Grundfunktionen Einstellungsmenü ¦¦ Einstellen der Uhrzeit Zeit ■■ Uhr: Die Uhr muss eingestellt werden, damit Sie die verschiedenen Timerfunktionen des Fernsehgeräts verwenden können. OO Jedes Mal, wenn Sie die Taste INFO drücken, wird die aktuelle Zeit angezeigt. ✎✎ Wenn Sie das Netzkabel ziehen, müssen Sie die Uhr erneut einstellen. Uhr-Modus (Auto / Manuell) ✎✎ Je nach Sendestation und Signal ist die automatisch eingestellte Zeit möglicherweise nicht korrekt.
✎✎ Wenn Sie den PIN-Code vergessen haben, drücken Sie die Fernbedienungstasten in der angegebenen Reihenfolge, um die PIN auf „0-0-00“ zurückzusetzen: Netztaste (Aus) → MUTE → 8 → 2 → 4 → Netztaste (Ein). ¦¦ Weitere Funktionen Sprache ■■ Menüsprache: Stellen Sie die Menüsprache ein. ■■ Teletextsprache: Einstellen der gewünschten Teletextsprache. Englisch ist der Standardwert in Fällen, wo die ausgewählte Sprache für die Sendung nicht verfügbar ist.
Grundfunktionen ✎✎Bei Verwendung des Datendienstes können Sie, je nach ¦¦ Bild-im-Bild (PIP) PIP t Gleichzeitige Anzeige des Fernsehbilds und des Bilds von einer externen Videoquelle. PIP (Bild-im-Bild) funktioniert nicht, für zwei gleiche Signalquellen. ✎✎HINWEIS xx Wenn Sie das Fernsehgerät im PIP-Modus ausschalten und wieder einschalten, wird das PIP-Fenster nicht mehr angezeigt.
Unterstützungsmenü Eigendiagnose Der Selbsttest kann einige Minuten dauern. Dies ist eine normale Funktion des Fernsehgeräts. ■■ Bildtest (Ja / Nein): Verwenden Sie diese Funktion, um Bildprobleme zu analysieren, und kontrollieren Sie das Farbmuster, wenn das Problem fortbesteht. ■■ Audiotest (Ja / Nein): Verwenden Sie die integrierte Melodie, um Tonprobleme zu ermitteln.
Erweiterte Funktionen Anschließen an einen PC Mit Hilfe eines HDMI/DVI-Kabels oder eines D-Sub-Kabels DVI OUT R-AUDIO-L PR PB AUDIO OUT AUDIO OUT PC OUT Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y R-AUDIO-L PR PB Y Anzeigemodi (D-Sub- und HDMI/DVI-Eingang) Die optimale Auflösung beträgt 1920 X 1080 bei 60 Hz.
Sie können Ihr Fernsehgerät so einrichten, dass es über Ihr lokales Netzwerk (LAN) und eine Kabel- oder WLAN-Verbindung auf das Internet zugreifen kann. ¦¦ Verbindung mit einem Kabelnetzwerk herstellen Sie können Ihr Fernsehgerät auf dreierlei Weise an Ihr LAN anschließen: yy Sie können Ihr Fernsehgerät über den LAN-Anschluss auf der Rückseite des Geräts direkt über ein CAT5-Kabel an ein externes Modem und Ihr LAN anschließen. Siehe nachfolgende Abbildung.
Erweiterte Funktionen Netzwerkkonfiguration (Auto) Netzwerk einrichten (Manuell) Verwenden Sie Eingang einrichten - automatisch, wenn Sie Ihr Fernsehgerät an ein Netzwerk anschließen, das DHCP unterstützt. Um die Kabelnetzwerkverbindung Ihres Fernsehgeräts automatisch einzurichten, gehen Sie folgendermaßen vor: Verwenden Sie Eingang einrichten - manuell, wenn Sie Ihr Fernsehgerät an ein Netzwerk anschließen, das eine statische IP-Adresse erfordert. So konfigurieren Sie automatisch 1.
Um Ihr Fernsehgerät drahtlos an Ihr Netzwerk anzuschließen, benötigen Sie einen Funkrouter oder ein Funkmodem sowie einen Samsung WLAN-Adapter (WIS09ABGN), den Sie mit dem hinteren oder seitlichen USB-Anschluss verbinden. Siehe nachfolgende Abbildung. ✎✎Um die SWL-Funktion (Samsung Wireless Link) verwenden zu können, müssen Sie den Anschluss über den Anschluss USB 1 (HDD) herstellen.
Erweiterte Funktionen Hinweis Das Bild kann bei manchen Kanälen gestört sein, wenn das Fernsehgerät an den WLAN-Adapter von Samsung angeschlossen ist. Stellen Sie die Verbindung in solch einem Fall mit einer der folgenden Methoden her: Methode 1 Verbinden mit Hilfe des USB-90°-Adapters Methode 2 Verbinden mit Hilfe eines Verlängerungskabels Order Netzwerkkonfiguration (Samsung Auto-Konfiguration) 5. ✎✎ Diese Funktion steht für Zugangspunkte zur Verfügung, die Samsung Auto Configuration unterstützen.
Die meisten Funknetzwerke verfügen über ein optionales Sicherheitssystem, mit dem alle Geräte, die auf das Netzwerk zugreifen wollen, einen verschlüsselten Sicherheitscode (den so genannten Zugriffs- oder Sicherheitsschlüssel) übertragen müssen. Als Sicherheitsschlüssel dient ein Kennwort (normalerweise ein Wort bestimmmter Länge oder einer definierte Anzahl von Buchstaben und Zahlen), das Sie eingeben mussten, als Sie die Sicherheitsmerkmale Ihres Funknetzwerks konfigurierten.
Erweiterte Funktionen Netzwerk einrichten (Manuell) SWL verbinden Wenn keine andere Methode funktioniert, müssen Sie die Werte für die Netzwerkkonfiguration manuell eingeben. Sie können Geräte, die PBC (WPS) unterstützen, direkt an Ihren Fernseher anschließen. Beziehen der Werte für die Netzwerkverbindung Um die Werte für die Netzwerkeinstellungen der meisten Windows-Computer abzurufen, gehen Sie folgendermaßen vor: 1.
Mit dieser Funktion können Sie auf einem USB-Speichermedium (MSC) oder Ihrem PC gespeicherte Foto-, Musik und/oder Filmdateien anzeigen bzw. wiedergeben. MediaPlay Videos SUM Gerät wechseln Geräte anzeigen E Eingabe R Zurück 04 Erweiterte Funktionen Media Play ¦¦ Anschließen eines USB-Geräts 1. Schalten Sie den Fernseher ein. Rückseite des Fernsehgeräts 2. Schließen Sie ein USB-Gerät mit Foto-, Musik und/oder Filmdateien an die USB 1 (HDD)- oder USB 2-Buchse seitlich am Fernsehgerät an. 3.
Erweiterte Funktionen ✎✎Die folgenden Funktionen werden beim Anschluss an einen PC über das Netzwerk nicht unterstützt: xx Die Funktionen für die Hintergrundmusik und die Einstellungen für Hintergrundmusik. xx Benutzerdefinierte Sortierung von Dateien in den Ordnern Foto, Musik und Film. xx Die Tasten � (REW) oder µ (FF), während ein Film abgespielt wird. ✎✎Divx DRM, Multi-Audio und eingebettete Beschriftung werden nicht unterstützt.
Navigieren Sie mit den Pfeiltasten (Auf / Ab / Rechts / Links) zu der gewünschten Datei und drücken Sie dann die ENTERE oder die Taste � (Wiedergabe). Die Datei wird wiedergegeben. ✎✎ Unterstützt den Gerätemodus und den Inhaltsmodus auf der Startseite von Media Play. Informationen : Hier können Sie den Namen der gewählten Datei sowie die Anzahl der Dateien und Seiten überprüfen. Videos 1/1 Page /Movie 01.avi Movie 01.avi Jan.10.2010 Movie 03.avi Jan.10.2010 Movie 05.avi Jan.10.2010 Movie 07.
Erweiterte Funktionen yy Unterstützte Videoformate Dateinamenserweiterung *.avi *.mkv *.asf Container AVI MKV ASF *.wmv ASF *.mp4 MP4 *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg *.ts *.tp *.trp Video-Codec Auflösung Framerate (f/s) Bitrate (Mbit/s) Divx 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8 XviD 1920 x 1080 6 ~ 30 8 H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 Motion JPEG 800 x 600 6 ~ 30 8 Divx 3.11 / 4.x / 5.1 / 6.
Wenn Sie die Filmwiedergabefunktion verlassen, kann der Film später von dem Punkt an abgespielt werden, an dem Sie unterbrochen haben. 1. 2. 3. Wählen Sie die Filmdatei, deren Wiedergabe Sie fortsetzen möchten. Drücken Sie dazu in der Dateiliste auf ▲ oder ▼. Drücken Sie auf �(Wiedergabetaste) / ENTERE. Wählen Sie mit der blauen Taste die Funktion für Wiedergabe fortsetzen (Wiedergabe fortsetzen). Die Filmwiedergabe wird dort fortgesetzt, wo Sie sie angehalten hatten.
Erweiterte Funktionen ¦¦ Wiedergabe mehrerer Dateien Abspielen ausgewählter Video / Musik / Fotodateien 1. 2. 3. Drücken Sie die gelbe Taste in der Dateiliste, um die gewünschte Datei auszuwählen. Wiederholen Sie den obigen Vorgang, um mehrere Dateien auszuwählen. HINWEIS xx Links neben dem Namen der gewähten Datei wird das Symbol (c) angezeigt. xx Drücken Sie die gelbe Taste noch einmal, um die Auswahl einer Datei zu stornieren.
Drücken Sie während der Wiedergabe die Taste TOOLS. Kategorie Vorgang Videos Titel Sie können die andere Datei direkt verschieben. ✓ Wiederholungsmodus Sie können Film- und Musikdateien wiederholt abspielen. ✓ Bildformat (Modus1 / Modus2 / Original) Sie können Bildformat entsprechend Ihren Wünschen anpassen. Bildeinstellungen Sie können die Bildeinstellungen festlegen. (S. 13, 14, 15, 16) ✓ Toneinstellungen Sie können die Toneinstellungen festlegen. (S.
Erweiterte Funktionen Anynet+ Was ist Anynet+?t Bei Anynet+ handelt es sich um eine Funktion, mit der Sie alle angeschlossenen Samsung-Geräte, die Anynet+ unterstützen, mit der Fernbedienung für Ihr Samsung-Fernsehgerät steuern können. Das Anynet+-System unterstützt nur Anynet+-fähige Samsung-Geräte. Wenn Sie wissen möchten, ob Ihr Samsung-Gerät diese Funktion unterstützt, suchen Sie das Anynet+-Logo auf Ihrem Gerät.
■■ Setup Anynet+ (HDMI-CEC) (Aus / Ein): Damit Sie die Funktionen von Anynet+ nutzen können, muss Anynet+ (HDMI-CEC) aktiviert Ein sein. Wenn die Funktion “Anynet+ (HDMI-CEC)” deaktiviert wird, sind auch alle Vorgänge in Verbindung mit Anynet+ deaktiviert. ✎✎ Autom. Ausschalten (Nein / Ja): Automatisches Abschalten von Anynet+-Geräten durch Abschalten des Fernsehgeräts. Damit Sie Anynet+ verwenden können, muss die Geräteauswahl der Fernbedienung auf TV eingestellt sein.
Erweiterte Funktionen ¦¦ Tonwiedergabe mit einem Receiver Sie können die Tonwiedergabe über einen Receiver (d. h. Heimkinosystem) anstelle des TV-Lautsprechers laufen lassen. 1. Wählen Sie Receiver und aktivieren Sie ihn (Ein). 2. Zum Beenden drücken Sie die Taste EXIT. Wenn Ihr Receiver nur Audiosignale unterstützt, wird er in der Geräteliste möglicherweise nicht angezeigt.
Nachricht / Medien / ScreenShare ¦¦ Informationen zu AllShare AllShare verbindet Ihr Fernsehgerät und Ihre SamsungMobiltelefone bzw. -Geräte über ein Netzwerk miteinander. Auf Ihrem Fernseher können Sie eingehende Aufrufe, SMS-Nachrichten und Zeitpläne anzeigen, die auf Ihren Mobiltelefonen gespeichert sind. Außerdem können Sie die auf Mobiltelefonen oder anderen Geräten (z. B.
Erweiterte Funktionen Alarm bei eingehendem Anruf Verwenden der ScreenShare-Funktion Wenn ein Anruf eingeht, während Sie fernsehen, wird das Alarmfenster geöffnet. Mit Hilfe von ScreenShare können Sie die verschiedenen von einem Mobiltelefon angebotene Inhalte durchsuchen. Zum Beispiel zeigt die nachfolgende Abbildung eine Zugriffsseite für den Inhalt auf einem Mobiltelefon. Sie können die Dateien des Mobiltelefons und das Telefonbuch und den Kalender auf dem Fernseher anzeigen.
Weitere Informationen Auf der Videotext-Indexseite finden Sie Verwendungshinweise zum Videotext. Für die korrekte Anzeige von Teletextinformationen muss der Senderempfang einwandfrei sein. Andernfalls können Informationen unvollständig sein oder einige Seiten nicht angezeigt werden. ✎✎Sie können die Videotextseiten durch Drücken der Zifferntasten auf der Fernbedienung wechseln. 1 / (Videotext an/ mix): Aktivieren Sie den Videotextmodus, nachdem Sie einen Sender ausgewählt haben, der Videotext anbietet.
Weitere Informationen Anbringen der Wandhalterung ¦¦ Montieren der Montagehalterung Wenn Sie das Fernsehgerät an der Wand anbringen, befestigen Sie die Montagehalterung an dem Teil, das (wie in der Abbildung gezeigt) mit dem Standfuß verbunden wird. Montagehalterung ¦¦ Vorbereiten für den Einbau der Wandhalterung (46 Zoll TV) Beim Einbau einer Wandhalterung eines anderen Herstellers, verwenden Sie den Haltering.
05 Weitere Informationen ¦¦ Spezifikation (VESA) der Wandhalterung ✎✎Die Wandhalterung wird nicht mitgeliefert, ist aber gesondert erhältlich. Montieren Sie die Wandhalterung an einer soliden Wand, die senkrecht zum Boden steht. Bei Installation auf anderen Trägermaterialien wenden Sie sich bitte an Ihren Fachhändler. Bei Montage an einer Decke oder schrägen Wand kann es herunterfallen und zu Verletzungen kommen.
Weitere Informationen Kensington-Schloss als Diebstahlsicherung Ein Kensington-Schloss dient zur physischen Sicherung des Systems bei Verwendung in öffentlichen Bereichen. Je nach Hersteller können Aussehen und Verriegelungsverfahren von der Abbildung abweichen. Informationen zur richtigen Anwendung entnehmen Sie bitte der Bedienungsanleitung des Kensington-Schlosses. 1 2 ✎✎Suchen Sie das Symbol „K“ auf der Rückseite des Fernsehgeräts. 1. 2. 3.
Bei Fragen zum Fernsehgerät schauen Sie zuerst in dieser Liste nach. Wenn keiner dieser Tipps zur Fehlerbehebung weiterhilft, öffnen Sie die Website „www.samsung.com“ und klicken Sie dort auf „Support“ oder wenden Sie sich an das in der Liste auf der letzten Seite angegebene Callcenter. Problem Lösungen und Erklärungen Bildqualität Führen Sie zu allererst den Bildtest durch, um zu bestätigen, dass Ihr Fernsehgerät das Testbild korrekt anzeigt.
Weitere Informationen Problem Lösungen und Erklärungen Kein Bild, kein Video Der Fernseher kann nicht eingeschaltet werden. • Das Fernsehgerät schaltet sich automatisch aus. • • • • • • Kein Bild/Video. • • • • HF-Anschluss (Terrestrisch/Kabel) Das Fernsehgerät empfängt nicht alle Kanäle. Das Bild ist verzerrt: Macroblock-Fehler, Smallblock-Fehler, Punkte, Pixelfehler PC-Verbindung Meldung „Modus nicht unterstützt“ wird angezeigt.
Lösungen und Erklärungen Ihre Einstellungen gehen nach 30 Minuten oder bei jedem Abschalten des Fernsehers verloren. • Vorübergehender Ausfall von Bild oder Ton. • • Sie sehen kleine Partikel, wenn Sie den Rahmen um den Bildschirm herum genau betrachten. Das PIP-Menü ist nicht verfügbar. • Die Meldung „Verschlüsseltes Signal“ oder „Kein Signal/Schwaches Signal“ wird angezeigt. • Sie haben das Fernsehgerät vor 45 Minuten ausgeschaltet, es schaltet sich aber von selbst wieder ein.
Weitere Informationen Technische Daten Bildschirm (nativ) Umgebungsbedingungen Betriebstemperatur Luftfeuchtigkeit (bei Betrieb) Lagerungstemperatur Luftfeuchtigkeit (Lagerung) TV-System Fernsehnorm/Videosystem Audiosystem HDMI IN 1 – 4 1920 x 1080 bei 60 Hz 10° C bis 40° C 10% bis 80%, nicht kondensierend -20° C bis 45° C 5% bis 95%, nicht kondensierend Analog: Je nach eingestelltem Land. Digital: DVB-T/DVB-C Analog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG2, MPEG4 BG. OK NICAM.
A H Alle wählen 13 AllShare 39 Anschließen an ein Audiogerät 8 Anynet+ 36 Anschließen an einen PC 22 Audio Out 8, 36 Aufnehmen 37 Autom. Einstellung 16 Automatische Lautstärke 17 Hautton HDMI Heimkino Helligkeit Hintergrundbild Hintergrundmusik B Balance Basisansicht Batterien Bearbeiten von Sendern Bildformat Installation Space 2 Kabelbinder Kanal-Manager Komp.
Diese Seite wurde absichtlich leer belassen. BN68-02689J_Ger.