LCD TV Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Country Customer Care Center Web Site BELGIUM 02 201 2418 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz DENMARK 38 322 887 www.samsung.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
English Contents Connecting and Preparing Your TV List of Parts.............................................................................. Installing the Stand.................................................................. Installing the Wall Mount Kit............................................... Viewing the Control Panel....................................................... Viewing the Connection Panel................................................. Viewing the Remote Control....................
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Viewing the Control Panel The product colour and shape may vary depending on the model. SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. MENU Press to see an on-screen menu of your TV’s features. In case of DTV mode, the DTV menu appears. Press to decrease or increase the volume.
Viewing the Connection Panel [Side Panel Jacks] [Rear Panel Jacks] (32 inch, 37 inch, 40 inch) (26 inch model does not have the side panel jacks.) Power Input [Rear Panel Jacks] (26 inch) Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels). - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
Viewing the Remote Control Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) Television Standby button Number buttons for direct channel access Automatic Power-off P : Next channel P : Previous channel Exit the OSD C ontrol the cursor in the menu One/Two-digit channel selection Use to see information on the current broadcast display "Channel Manager" It on the screen.
Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. 2. Press the button on the front of the set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. 3.
- Storing Channels Automatically - Storing Channels Manually Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2.
Setting the Channel Manager Set the channels according to your preference. You can easily delete, add, or lock the channel you want. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "Channel Manager", then press the ENTER button. 3. Press the ENTER 4. Press the button to select " 5. Press the or button to select the undesired channel, then press the ENTER button to cancel. 6.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. G ive easily remembered numbers to the channels that you watch most often. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 2. Press the or button to select "Sort", then press the ENTER button. 3.
LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "LNA", then press the ENTER button. button. 3. Press the or button to select "On" or "Off". Press the ENTER button. 4. Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settings. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 4 on page 11. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit. The "Reset" will be set for each picture mode. Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1.
DNIe Demo (Digital Natural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. 2.
PIP Settings O: PIP operates, X: PIP doesn’t operate Main Sub TV Ext.1 Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast.
Setting the TruSurround XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button. 2.
Resetting the Sound Settings to the Factory Defaults If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER button. 2. Press the or button to select "Reset", then press the ENTER button. 3. Press the EXIT button to exit.
4. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 5. Press the or button to select "Off Timer", then press the ENTER button. 6. Press the or button to adjust "Hour", then press the button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return. 7. Press the EXIT button to exit.
Using the Energy Saving Feature This function adjusts the brightness of the TV so as to reduce power consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power consumption. 1. Press the MENU button to display the on-screen menu. Press the or button to select "Setup", then press the ENTER button. 2. Press the or button to select "Energy Saving", then press the ENTER button. 3.
Previewing the DTV Menu System To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Available in the Digital TV mode. Press the D.MENU button.
Updating the Channel List Manually You can specify the channel or frequency for a fast channel search. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Manual Store", then press the ENTER 4. To... Then... Move to "Channel", "Frequency", or "Bandwidth" or button Set the "Channel", or "Bandwidth" or button Set the "Frequency" Numeric button (0~9) button. button.
Move 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Channel", then press the ENTER 3. Press the or button to select "Edit Favourite Channels", then press the ENTER button. 4. Select the required channel using the or button. 5. Press the green button. 6. Press the or button to select the channel that you want to move, and press the green or ENTER button. 7. Press the EXIT button to exit. button.
Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. 1. While viewing a programme, press the INFO ( ) button. The programme information is displayed. 2. To exit from banner information, press the INFO ( ) button. Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters.
Using the Scheduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Press the or button to select "Scheduled List", then press the ENTER 4. Press the red button. The channel will be switched to the scheduled program. 5.
Viewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the D.MENU button to display the DTV menu. 2. Press the ENTER 3. Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the or button. 4. Press the ENTER 5. Press the green button. All the channel lists and the favorite channel lists will be toggled. 6. Select a programme of your choice by pressing the , 6, 3, or 4 button. 7.
Adjusting the Translucency Level You can set the translucency of the menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Preference", then press the ENTER 3. Press the or button to select "Translucency Level", then press the ENTER button. 4. Select the required option ("High", "Medium", "Low", or "Opaque") by pressing the or button, and press the ENTER button to change the setting. 5. Press the EXIT button to exit. button.
Setting the Subtitle You can activate and deactivate the subtitles. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "Feature", then press the ENTER 3. Press the ENTER 4. Select "On" by pressing the or button. Press the ENTER 5. Press the EXIT button to exit. button. button again, to select "Subtitle". button. Selecting the Preferred Language (Subtitle or Audio) You can change the default value for subtitle and audio languages.
Upgrading the Software (Option) To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. pgrade Now U If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then restarts.
Selecting the CI (Common Interface) Menu This enables the user to select from the CAM-provided menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the or button to select "System", then press the ENTER 3. Press the or button to select "Common Interface", then press the ENTER button. button. 4. Select to "CI Menu" by pressing the or button, and press the ENTER 5. Select the required option by pressing the or button, and press the ENTER button. 6.
Displaying the Teletext Information You can display teletext information at any time, but signal reception must be good. Otherwise: Information may be missing. Some pages may not be displayed. To activate the teletext mode and display the contents page: 1. Using the P ( teletext service. 2. Press the TTX/MIX ( ) or P ( ) button, select the channel providing the ) button to activate the teletext mode. he contents page is displayed.
Using Fastext to Select a Teletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. Display the teletext contents page by pressing the TTX/MIX ( 2. Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line). 3. Press the Red button to display the previous page. Press the Green button to display the next page. 4.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Cable Figure 2 2.
Technical and Environmental Specifications LE26R73BD Model Name Screen Size (Diagonal) Power Supply Sound Output Dimension (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name Screen Size (Diagonal) Power Supply Power Consumption PC Resolution Sound Output Dimension (WxDxH) Body With stand Weight With stand LE40R73BD 26 inch 32 inch 40 inch AC220-240V 50 Hz AC220-240V 50 Hz AC220-240V 50 Hz P
This page is intentionally left blank. BN68-01007C-00Eng.
Table des matières CONNEXION ET PREPARATION DE VOTRE TELEVISEUR 2 2 2 3 4 6 6 7 7 7 Aperçu du système de menu DTV.......................................... 19 Mise à jour automatique de la liste des chaînes..................... 19 Mise à jour manuelle de la liste des chaînes..................... 20 Modification de vos chaînes favorites..................................... 20 Sélection du Gestionnaire des tâches..................................... 21 Affichage des informations sur l’émission...............
Liste de pièces Veuillez vous assurer que les composants suivants sont bien inclus avec votre téléviseur LCD. Le cas échéant, contactez votre revendeur.
Présentation du panneau de commande La couleur et la forme du produit peuvent varier en fonction du modèle. SOURCE Bascule entre toutes les sources d’entrée disponibles. (TV, Ext.1, Ext.2, AV, S-Vidéo, Composant, PC, HDMI, DTV). Dans le menu à l’écran, utilisez ce bouton de la même manière que le bouton ENTER de la télécommande. Pour changer de canal. Dans le menu à l’écran, utilisez les boutons de la même manière que les boutons et de la télécommande.
Présentation du panneau de branchement [Prises du panneau latéral] (Le modèle 26 pouce n’est pas équipé de prises de panneau latéral.) [Prises du panneau arrière] (32 pouce/37 pouce/40 pouce) Entrée del’alimentation [Prises du panneau arrière] (26 pouce) Lorsque vous raccordez un appareil externe au téléviseur, assurez-vous que l’appareil est arrêté. Lorsque vous connectez un périphérique externe, faites correspondre les couleurs du terminal de connexion et du câble.
Branchement HDMI/DVI - Prend en charge les connexions entre des périphériques audio/vidéo compatibles HDMI (boîtiers décodeurs, lecteurs DVD, récepteurs AV et moniteurs). - Aucune connexion audio supplémentaire n’est requise pour une connexion HDMI - HDMI. Qu’est-ce que l’HDMI ? - “High Definition Multimedia interface” permet la transmission de données vidéo numériques haute définition et plusieurs canaux de son numérique (5.1 canaux).
Présentation de la télécommande électionne le périphérique de destination S à régler à l’aide de la télécommande Samsung (Téléviseur, lecteur DVD, STB, câble, magnétoscope) Bouton de veille du téléviseur Ecran de menu DTV Arrêt automatique P : Chaîne suivante P : Canal précédent Boutons numériques d’accès direct aux chaînes Sélection des effets visuels Permet de quitter le menu à l’écran Sélection de canaux à 1 ou 2 chiffres Affiche les informations sur la diffusion en cours I l affiche “Gest
Mise en marche et arrêt Le câble relié au secteur est fixé à l’arrière du téléviseur/moniteur. 1. Relier le câble principal à la prise appropriée. L’indicateur de veille situé à l’avant du téléviseur s’allume. 2. Appuyez sur le bouton à l’avant du téléviseur. Vous pouvez également appuyer sur le bouton POWER ou le bouton TV/DTV de la télécommande pour allumer le téléviseur. Le dernier programme que vous avez regardé est automatiquement re-sélectionné. 3.
- Mémorisation automatique des chaînes - Mémorisation manuelle des chaînes Mémorisation automatique des chaînes Vous pouvez chercher les plages de fréquences disponibles par balayage (leur disponibilité dépend de votre pays). Il est possible que les numéros de programmes alloués automatiquement ne correspondent pas aux numéros de programmes souhaités ou actuels. Vous pouvez toutefois organiser les numéros manuellement et effacer les chaînes que vous ne souhaitez pas regarder. 1.
Réglage de Gestionnaire de Chaînes Réglez les chaînes selon vos préférences. Vous pouvez aisément supprimer, ajouter ou verrouiller la chaîne de votre choix. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ou pour sélectionner “Canal”, puis sur la touche ENTER . 2. Appuyez sur le bouton ou pour sélectionner “Gestionnaire de Chaînes”, puis sur la touche ENTER . 3. Appuyez sur le bouton ENTER pour sélectionner “Gestionnaire de Chaînes”. 4.
Organisation des canaux mémorisés Organisation des canaux mémorisés: Changer l’ordre numérique dans lequel ces chaînes ont été automatiquement mémorisées. A ttribuer des numéros facilement mémorisables aux chaînes que vous regardez le plus souvent. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ou pour sélectionner “Canal”, puis sur la touche ENTER . 2. Appuyez sur le bouton ou pour sélectionner “Tri des canaux”, puis sur la touche ENTER . 3.
Amplificateur faible bruit (LNA) Si le téléviseur fonctionne dans une zone où le signal est faible, la fonction LNA peut améliorer la réception (un préamplificateur de bruit faible renforce le signal entrant). 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ou pour sélectionner “Canal”, puis sur la touche ENTER . 2. Appuyez sur le bouton ou pour sélectionner “LNA”, puis sur la touche ENTER . 3. Appuyez sur le bouton ou pour sélectionner “Marche” ou ”Arrêt”.
Rétablir les paramètres de réglage de l’image d’usine. Vous pouvez rétablir les réglages de l’image définis par défaut en usine. 1. Pour sélectionner l’effet visuel souhaité, observez les instructions 1 à 4 dans la section “Modification de l’image standard” à la page 11. 2. Appuyez sur le bouton ou pour sélectionner “Réinitialiser”, puis sur la touche ENTER . 3. Appuyez sur le bouton EXIT pour quitter le menu. La fonction “Réinitialiser” réinitialise chaque mode d’image.
DNle Démo (Digital Natural Image engine) La nouvelle technologie de Samsung vous apporte des images plus détaillées avec une amélioration des contrastes et des blancs. Le nouvel algorithme de compensation d’images vous donne une image plus lumineuse et plus claire. La technologie DNIe adaptera tous les signaux à votre vue, quels qu’ils soient. Vous pouvez apprécier l’amélioration de l’image par la technologie DNIe en activant le mode “DNle Démo”. 1. Appuyez sur le bouton MENU pour afficher le menu.
Paramètres PIP O: PIP activé, X: PIP désactivé Principal Secondaire TV Ext.1 Ext.2 AV S-Vidéo Composant PC HDMI DTV TV X X X X X X O O X Ext.1 X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Vidéo X X X X X X X O X Composant X X X X X X X O X PC X X X X X X X X X HDMI O O O O O O X X X DTV X X X X X X X X X Changement de la norme Son Vous pouvez sélectionner le type d’effet sonore souhaité lorsque vous regardez un programme donné. 1.
Paramétrage de la technologie TruSurround XT (SRS TSXT) ous pouvez également paramétrer V ces options en appuyant sur la touche SRS de la télécommande. La technologie TruSurround XT est une technologie SRS brevetée qui répond au problème de lecture des contenus multicanaux 5.1 sur deux haut-parleurs. La technologie TruSurround garantit un son surround virtuel d’une exceptionnelle qualité sur tout système de lecture à deux haut-parleurs, dont les haut-parleurs du téléviseur.
Rétablir les paramètres de son par défaut Si le mode Jeu est activé, la fonction Réinitialiser le son est disponible. Sélectionner la fonction Réinitialiser après avoir réglé l’égaliseur rétablit ses paramètres par défaut. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ou pour sélectionner “Son”, puis sur la touche ENTER . 2. Appuyez sur le bouton ou pour sélectionner “Réinitial.”, puis sur la touche ENTER . 3. Appuyez sur le bouton EXIT pour quitter le menu.
4. Appuyez sur le bouton ou pour “Heure”, puis appuyez sur le bouton pour passer à l’étape suivante. Effectuez les autres paramétrages à l’aide de la même méthode que celle ci-dessus. Lorsque vous avez terminé, appuyez sur le bouton ENTER . 5. Appuyez sur le bouton ou pour sélectionner “Minuterie OFF”, puis sur la touche ENTER . 6. Appuyez sur le bouton ou pour “Heure”, puis appuyez sur le bouton pour passer à l’étape suivante.
Utilisation de la fonction d’économie d’énergie Cette fonction règle la luminosité du téléviseur afin de réduire la consommation d’énergie. Lorsque vous regardez la télévision le soir, réglez l’option du mode “Mode éco.” sur “Elevé” afin de réduire l’éblouissement ainsi que la consommation. 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ou pour sélectionner “Configuration”, puis sur la touche ENTER . 2. Appuyez sur le bouton ou pour sélectionner “Mode éco.
Aperçu du système de menu DTV Pour savoir comment naviguer dans le système de menus sur écran et ajuster les différents réglages disponibles, reportez-vous à l’illustration suivante. Disponible en mode TV numérique. Appuyez sur le bouton “D.MENU”. Guide Guide Main/Après Guide Complet Liste en annexe Par défaut Prés./Suiv.
Mise à jour manuelle de la liste des chaînes Vous pouvez spécifier la chaîne ou la fréquence pour une recherche de chaînes rapide. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ou pour sélectionner “Canal”, puis sur la touche ENTER 3. Appuyez sur le bouton ou pour sélectionner “Mémorisation Manuelle”, puis sur la touche ENTER . 4. Pour... Alors...
Déplacement Modif. les canaux favoris 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ou pour sélectionner “Canal”, puis sur la touche ENTER 3. Appuyez sur le bouton ou pour sélectionner “Modif. les canaux favoris.”, puis sur la touche ENTER . 4. Sélectionnez la chaîne désirée à l’aide du bouton ou . 5. Appuyez sur le bouton vert. 6.
Affichage des informations sur l’émission Lorsque vous regardez une chaîne, des informations supplémentaires au sujet de l’émission en cours peuvent s’afficher. 1. Lorsque vous regardez un programme, appuyez sur le bouton INFO ( ). Les informations sur l’émission s’affichent. 2. Pour masquer les informations, appuyez sur le bouton INFO ( ). Affichage des informations du guide électronique des programmes (EPG) Les informations du guide électronique des programmes (EPG) sont fournies par les chaînes.
Utilisation de la liste de programmation Si vous créez une liste de programmation des émissions que vous aimeriez regarder, la chaîne de l’émission programmée est activée automatiquement à l’heure définie, même si vous en regardez une autre. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ENTER 3. Appuyez sur le bouton ou pour sélectionner “Liste de annexe”, puis sur la touche ENTER . 4. Appuyez sur le bouton rouge.
Affichage de toutes les chaînes ou des chaînes favorites Dans le menu EPG, vous pouvez afficher toutes les chaînes ou vos chaînes favorites. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ENTER 3. Sélectionnez le guide désiré (“Guide Maintenant & Après” ou “Guide Complet”) en appuyant sur le bouton ou le bouton . 4. Appuyez sur le bouton ENTER 5. Appuyez sur le bouton vert.
Réglage du niveau de transparence Vous pouvez régler la transparence du menu. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ou pour sélectionner “Préférence”, puis sur la touche ENTER . 3. Appuyez sur le bouton ou pour sélectionner “Niceau de transparence”, puis sur la touche ENTER . 4. Sélectionnez l’option (“Elevé”, “Moyen”, “Bas” ou “Opaque”) désirée à l’aide des boutons ou , puis appuyez sur le bouton ENTER pour modifier le réglage. 5.
Réglage des sous-titres Caractéristique Vous pouvez activer ou désactiver les sous-titres. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ou pour sélectionner “Caractéristique”, puis sur la touche ENTER . 3. Appuyez sur le bouton ENTER 4. Sélectionnez “Mar.” en appuyant sur le bouton ou . Appuyez sur le bouton ENTER . 5. Appuyez sur le bouton EXIT pour quitter le menu. pour sélectionner “sous-titres”.
Mise à jour du logiciel (option) Pour disposer des fonctions de télévision numérique les plus récentes sur votre appareil, des mises à jour logicielles sont diffusées régulièrement avec le signal de télévision normal. L’appareil détecte automatiquement ces mises à jour et affiche un message d’avertissement. Vous pouvez dans ce cas décider d’installer la mise à jour.
Sélection du menu CI (Interface commune) L’utilisateur peut effectuer une sélection dans le menu figurant sur le module CAM. 1. Appuyez sur le bouton D.MENU pour afficher le menu DTV. 2. Appuyez sur le bouton ou pour sélectionner “Système”, puis sur la touche ENTER . 3. Appuyez sur le bouton ou pour sélectionner “Interface commune”, puis sur la touche ENTER . 4. Sélectionnez le guide “CI Menu” en appuyant sur le bouton ou , puis appuyez sur le bouton ENTER . 5.
Affichage des informations Télétexte Vous pouvez afficher des informations télétexte à tout moment, mais la réception du signal doit être bonne. Dans le cas contraire: Des informations peuvent manquer. Des pages peuvent ne pas être affichées. Pour activer le mode télétexte et afficher les informations télétexte: 1. A l’aide du bouton P service télétexte. 2. Appuyez sur le bouton TTX/MIX ( ( ) ou P ( ) sélectionnez la chaîne fournissant le ) pour activer le mode Télétexte.
Utilisation du système Fastext pour sélectionner une page télétexte Les différents sujets inclus dans les pages du Télétexte disposent d’un code de couleur et peuvent être sélectionnés à l’aide des boutons colorés de la télécommande. 1. Affichez les informations du Télétexte en appuyant sur le bouton TTX/MIX ( 2. Appuyez sur le bouton coloré correspondant au sujet que vous voulez sélectionner ; (les sujets disponibles sont listés sur la ligne d’informations d’état). 3.
Sélection du PC Réglage de base et réglage fin de l’image (Verrouillage Image) : Le but du réglage de la qualité de l’image est d’éliminer ou de réduire le bruit parasite de l’image (défauts). Si le bruit parasite n’est pas éliminé en effectuant uniquement une syntonisation fine, réglez la fréquence du mieux que vous pouvez (approximative) puis effectuez à nouveau une syntonisation plus fine. Une fois le bruit parasite réduit, réajustez l’image pour l’aligner au centre de l’écran. 1.
Utilisation du verrouillage Kensington antivol Le verrou Kensington est un dispositif permettant de fixer le système lorsqu’il est utilisé dans un lieu public. Le dispositif de verrouillage doit être acheté séparément. Il se peut que l’apparence et la mé thode de verrouillage soient différents de l’illustration en fonction du fabricant. Veuillez vous reporter au manuel fourni avec le verrou Kensington pour une utilisation adéquate. 1.
Spécifications techniques et environnementales Modèle Taille de l’écran (Diagonale) Alimentation LE26R73BD LE32R73BD LE40R73BD 26 pouce 32 pouce 40 pouce AC220-240V 50 Hz AC220-240V 50 Hz AC220-240V 50 Hz Consommation 120 W 152 W 190 W PC Résolution 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 5WX2 10 W X 2 10 W X 2 675,0 x 75,0 x 475,5 mm 675,0 x 215,5 x 530,0 mm 800,0 x 80,0 x 548,5 mm 800,0 x 252,0 x 603,0 mm 991,5 x 87,0 x 658,5 mm 991,5 x 326,0 x 713,0 mm 10,55 kg
Cette page est laissée intentionnellement en blanc. BN68-01007C-00Fre.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.