LCD TV installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model BN68-02157K-x0-Eng.indd 1 Serial No.
Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full control is through the SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Digital TV Notice 1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2.
Contents List of Parts.............................................................................................................................................2 Installing the Stand.................................................................................................................................2 Installing the Wall Mount Kit....................................................................................................................2 Viewing the Control Panel................
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. M4 X L16 Remote Control & Batteries (AAA x 2) Power Cord • Owner’s Instructions Cover-Bottom • Safety Guide Data Cable • Warranty card Stand & Cleaning Cloth Stand Screw x 4 • Registration Cards ➣ Warranty card / Safety Guide / Registration Cards (Not available in all locations) ➣ The stand and stand screw may not be included depending on the model.
Viewing the Control Panel 1 2 3 4 5 6 7 8 3 4 5 6 7 8 2 1 ➣ The product color and shape may vary depending on the model. 1 Speakers 2 Remote Control Sensor Aim the remote control towards this spot on the TV. 3 SOURCE Toggles between all the available input sources (TV, AV, Component, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you would use ENTER button on the remote control. 4 MENU Press to see an on-screen menu of your TV’s features. 5 +=Press to decrease or increase the volume.
Viewing the Connection Panel LE32B550M2H/LE37B550M2H/LE40B550M2H/LE46B550M2H [TV Rear Panel] 1 2 3 4 [TV Side Panel] 5 HDMI IN2 2 IN 1 6 Power Input 7 % ➣ @ $ # ! 0 9 8 The product color and shape may vary depending on the model. ➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off ➣ When connecting an external device, match the color of the connection terminal to the cable.
Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.
7 Kensington Lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The location of the Kensington Lock may be different depending on its model 8 RJP - This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional module so as to improve device use convenience.
Viewing the Remote Control 1 POWER Turns the TV on and off. 2 NUMERIC BUTTONS Press to change the channel. ^ SOURCE Press to display and select the available video sources. & FAV.CH Press to switch to your favorite channels. 3 ALARM Enter the hour you want the * MENU Displays the main on-screen TV to turn on. menu. 4 (MUTE) Press to temporarily cut off ( RETURN the sound. Returns to the previous menu. 5 += Press to increase or ) UP▲ / DOWN▼ / LEFT◄ / decrease the volume.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington lock for proper use. The locking device has to be purchased separately. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2.
Connecting the TV with STB (SBB) TV Rear Panel Hotel Server STB(Set Top Box) or SBB(Set Back Box) 2 Dc Cable 1 Data Cable 1. 2. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB(SBB) with the Data cable. ➣ Use data communication. Connect the [Class 2 Wiring-5V DC/2.5A (12V DC/1.5A)] jack of the TV to the [DC-POWER] jack of the STB (SBB) with the DC cable. ➣ The supported jack type differs depending on the STB (SBB) model. ➣ TV Jack Type: 6.
Warning When you use the DC power output jack, you have to check the standard output power of STB(SBB) and you should use the DC power within the standard output(Class 2 Wiring-5V DC/2.5A (12V DC/1.5A). - For 5V SBB, SBB load current must not exceed 2.5A. - For 12V SBB, SBB load current must not exceed 1.5A. - The initial output is 5V. - For 12V SBB, you have to change the output voltage to 12V in order to use the power. Changing the Output Voltage 1. 2. Press the POWER button. ➣ The TV is powered on.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. Connecting through the Variable Output (available without an external amplifier) TV Rear Panel Volume Control Box VOL + VOL - Speaker + 2 1 1. Connect the VARIABLE AUDIO port of the TV to the Bathroom Wall Speakers of the hotel. Signal wire : Speaker + Shield wire : Speaker - 2. Connect the [VOL-CTRL] jack of the TV to the Volume Control Box Switch port of the Bathroom Wall of the hotel.
♦ Variable Output Port Specifications - Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. Volume Control Box VOL + 1 3 2 VOL - DOWN ( White 1 ) VOL - UP ( Black /Red 2 ) VOL - GND ( Shield Wire 3 ) Connect through the Fixed Output (available without an external amplifier) TV Rear Panel + Audio Amplifier AUDIO IN 1 Stereo cable 1. Connect the AUDIO OUT port of the TV and the Audio In port of the audio amplifier with a stereo cable. English - 12 BN68-02157K-x0-Eng.
Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. TV Rear Panel MediaHub HD Rear 1 RS-232 Data Cable 2 HDMI cable 1. 2. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. Connect the [HDMI] port of the TV and the HDMI port of the MediaHub HD. ♦ MediaHub HD The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs.
Connecting the RJP(Remote Jack Pack) Output of any external source connected to RJP on hotel desk. 5 Video Cable 3 Video / Audio Cable 1 RS-232 Data Cable TV Rear Panel TV Side Panel RJP Rear HDMI IN2 2 D-sub / PC Audio cable 4 HDMI cable 1. 2. 3. 4. 5. Connect the RJP port of the TV and the RS/232 port of the RJP. Connect the PC IN [PC] / [AUDIO] port of the TV to the PC/AUDIO port of the RJP. Connect the AV IN [VIDEO]/[R-AUDIO-L] port of the TV to the RCA port of the RJP.
➣ Scenario 1: When no inputs are connected. Source To Connect AV 2 Sec PC 0.7 Sec HDMI 3.9 Sec ➣ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source Disconnect To Connect Total AV 4.5 Sec 2 Sec 6.5 Sec PC 0.7 sec 0.7 Sec 1.4 Sec HDMI 3.9 Sec 3.9 Sec 7.8 Sec ➣ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority.
Setting the Hotel Option Data Stand-alone mode To Enter: P ress the To Exit from this menu : power off and turn on again. buttons in order.
21 Sub AMP mode 2 Determines the Sub AMP operation mode. - 0: Turns the Sub AMP function off (PWM off). - 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined according to the Power On Volume, the Min Volume, and the Max - 2: Determines the volume according to the bathroom control panel setting.
Interactive Mode buttons in order, in normal operation To Enter: Press the state. To Exit from this menu : Power Off and Turn On again.
PMOLED Normal Dimming 3 This function is not available on this model. 23 PMOLED StandBy Dimming 2 This function is not available on this model. 24 Audio Loop In Off 25 Clone Hotel Menu Interactive 26 Menu display Off - On : Main Menu display - Off : Main Menu No display 27 Hotel Logo Off Select Hotel Logo 28 Hotel Logo DL - 29 Logo Display Time 5 sec Audio loop identification or H.
Welcome Message Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room. - Welcome message settings are placed in Hotel Option Menu. - Welcome message should be ON in order to display the message on power on.
Hotel Logo Hotel Logo is a function that shows picture image which represents hotel during power on procedure. - Hotel Logo will be in hotel option menu in both Standalone and Interactive mode. - Lower menus will be enabled when hotel Logo option is on. - Hotel Logo will be displayed if there is logo image which is already stored in memory and hotel logo option is on during power on procedure. - Hotel Logo will not be displayed when Hotel Logo option is off even if logo image exists.
USB Cloning USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. USB Cloning is in hotel option menu in both Standalone and Interactive mode. ♦ Cloning from TV to USB It is an operation to copy the stored data from the specific area on the EEPROM from the TV set to the USB device. 1.
Hotel Plug & Play Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once. - Hotel Plug & Play is available only one time when power is first turned ON. - After setting up first TV and Clone TV to USB - Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV ♦ UI Scenario If exit is selected Hotel Plug & Play Easy Set Up Ok After 3 sec Standalone mode is set.
Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote. This function is useful where there is more than one TV in one location like hospital Set ID number will be displayed in source osd. It is possible to support up to 10 different remote key transmission for multi code. Initial ID code which each TV has is “0”. - ID code could be set and reset in Analog TV mode or PC mode.
Setting the Time ♦ The time is entered - Press the remote control button to select "Clock set" and set up the time. “Menu” → “Setup” → “Time” → “Clock” → “Clock Set” ♦ Clock Clock Mode : Manual Clock Set TV Setting the Interactive Mode Time - If the Hotel System transmits time information, the time is set automatically. - If the Hotel System does not transmit time information, the time cannot be displayed.
Specifications Items TV System Audio out DC out Input Data Specification Comment DVB-T/C, PAL, SECAM, NT4.43 Speaker out 32inch / 37inch / 40inch / 46inch : 10W x 2 Variable Audio 4W mono 8 ohm SPK' RCA Jack output BTL Sound output Audio out 500mVrms Phone Jack, Monitor out 5V out Max 2.5A Initial output Voltage 12V out Max 1.
This page is intentionally left blank. BN68-02157K-x0-Eng.
This page is intentionally left blank. BN68-02157K-x0-Eng.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRALIA FINLAND FRANCE GERMANY HUNGARY ITALIA NETHERLANDS POLAND PORTUGAL SPAIN UNITED KINGDOM Customer Care Centre 800-112233 0771-400002 0825-022082 01805-471101 0840-985985 800-194194 015-2197000 0-801-B2BSAM (222728) 808-B2BSAM 0902024-010 +44 (0) 845 8414141 BN68-02157K-00 BN68-02157K-x0-Eng.
