User Manual

22
English
Basic Features
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC) ■ : This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
According to the type of broadcast signal, ✎ MPEG
/ HE-AAC can be adjusted between -10dB and
0dB.
To increase or decrease the volume, adjust ✎
between the range 0 and -10 respectively.
SPDIF Output ■ : SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby ✎
Digital setup, maximize your interactive 3D sound
experience.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Dolby Digital Comp (Line / RF) ■ : This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select ✎ Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode ¦
t
When you set to Dual I-II, the current sound mode is
displayed on the screen.
Audio
Type
Dual I-II Default
A2
Stereo
Mono Mono
Automatic
change
Stereo
Stereo  Mono
Dual
Dual I  Dual II
Dual I
NICAM
Stereo
Mono Mono
Automatic
change
Stereo
Mono  Stereo
Dual
Mono  Dual I
 Dual II 
Dual I
If the stereo signal is weak and an automatic switching, ✎
occurs, then switch to the mono.
Only activated in stereo sound signal. ✎
Only available when the ✎ Input source is set to TV.
Setup Menu
Setting the Time ¦
Time
Clock ■ : Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press O
the INFO button.
If you disconnect the power cord, you have to set ✎
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal, ✎
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set ✎
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
Available only when ✎ Clock Mode is set to
Manual.
Time Zone: You can select your time zone.
This function is only available when Clock Mode is ✎
set to Auto.
Depending on the broadcast station and signal, ✎
the auto time may not be set correctly. If this
occurs, set the time manually.
Using the Sleep Timer ¦
Sleep Timer ■
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel ✎ Sleep Timer, select Off.
BN68-02808A_Eng.indb 22 2010-05-18 �� 10:58:54