User Manual F22T45* F24T45* F27T45* The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited.
Table of contents Before Using the Product Safety Precautions Electricity and Safety Installation Operation 4 4 5 6 Cleaning 7 Correct posture to use the product 8 Preparations Installation Attaching the Stand Precautions for moving the product Checking the space around the product Adjusting the Product Tilt and Height Rotating the Product Anti-theft Lock Wall Mount Kit Specifications (VESA) 9 9 10 10 11 11 12 13 Control Panel 14 Direct Key Guide 15 Connecting and Using a Source Device Menu Re
Table of contents Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Product diagnosis (Screen issue) Checking the Resolution and Frequency Check the following.
Chapter 01 Before Using the Product Safety Precautions Electricity and Safety Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. •• Do not use a damaged power cord or plug, or a loose power socket. •• Do not use multiple products with a single power socket. •• Do not touch the power plug with wet hands. CAUTION •• Insert the power plug all the way in so it is not loose.
Installation Caution •• Do not drop the product while moving. Warning •• Do not set down the product on its front. •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Centre for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).
Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Correct posture to use the product Use the product in the correct posture as follows: •• Straighten your back. •• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. •• Keep your eyes directly in front of the screen. •• Adjust the angle so light does not reflect on the screen. •• Keep your forearms perpendicular to your upper arms and level with the back of your hands. •• Keep your elbows at about a right angle.
Chapter 02 Preparations Installation Attaching the Stand ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――Disassembly is the reverse order of assembly. 1 x2 2 Push the stand neck into the main body in the direction of the arrow as shown in the figure. Tightly fasten the connecting screw on the bottom of the stand. 3 Do not remove the fixing pin until you are finished attaching the stand.
Precautions for moving the product Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. ――The exterior may differ depending on the product. 10 cm 10 cm •• Hold the lower corners or edges of the product when moving it. •• Do not directly apply pressure on the screen.
Adjusting the Product Tilt and Height Rotating the Product ――The colour and shape of parts may differ from what is shown. Specifications are subject to change without ――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -3.0° (±2.0°) ~ +25.0° (±2.0°) notice to improve quality. -1.0° (+0°, -2.0°) ~ 95.0° (±2.0°) F22T45*: 0 ~ 100.0 mm (±2.0 mm) F24T45* / F27T45*: 0 ~ 130.0 mm (±2.0 mm) -45.0° (±2.0°) ~ 45.0° (±2.
Anti-theft Lock You can rotate your product as shown below. 1 2 3 ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided with your anti-theft locking device for details. To lock an anti-theft locking device: 4 5 6 •• Be sure to fully extend the stand before rotating the product.
Wall Mount Kit Specifications (VESA) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Control Panel Parts Description JOG Button ――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Multi directional button that helps navigate. This LED is power status indicator. Power LED ――You can select the power LED operation to be enabled or disabled on the menu screen. ( JOG Button UP LEFT PRESS(ENTER) Function Key Guide To use the Function Key Guide, press the JOG button when the screen is turned on.
Direct Key Guide ――On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. ――The Direct Key Guide screen shows if Eye Saver Mode is enabled. ( : On, : Off) ――When the product not displays the OSD menu, the JOG Button could be used as below. Eye Saver Mode Volume Source Features Eye Saver Mode Off •• UP: Adjust Brightness, Contrast, Eye Saver Mode. •• DOWN: Adjust Volume, Mute. •• LEFT/RIGHT: Adjust Source.
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. 1 Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before connecting the product, make sure you remove the power cables from both the product and the external device to prevent damage to the product due to a short circuit or over current.
Ports Port Description Connect to an audio output device such as headphones. ――The functions available may vary depending on the product model. The colour and shape of parts may Connect to a USB device. differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. Connects to a PC using a USB cable. Compatible with a USB cable version 2.0. ――This port can only connect to a PC. DP IN Connects to a PC using a DP cable.
Connecting and Using a PC Connection Using an HDMI-DVI Cable Select a connection method suitable for your PC. HDMI IN 1 HDMI IN 2 Connection Using the HDMI Cable HDMI IN 1 HDMI IN 2 ――When using HDMI-DVI cable, audio may not be supported according to source device. ――The optimum resolution may not be available with an HDMI-DVI cable. ――When connecting an HDMI cable, use the cable that came with the components of the product.
Connecting to headphones or earphones Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at a time. Connecting the Power ――To detect and start a USB device faster, connect the USB device to the port on the product. The read/ write rate will be affected by the USB device and your PC. ――For USB-related problems caused by OS, drive programmes or software, please contact relevant suppliers.
Tidying Up the Connected Cables 1 Tilt the display, as shown in the figure. 4 Put both cables in the cable holder on the stand (HOLDER-STAND CABLE) to organise the cables, as shown in the figure. 2 Rotate the product to the highest vertical position. 5 Rotate the product to the horizontal position. 3 Connect the corresponding cables. 6 Assembly is complete.
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. ――If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again. ――If you want to set the optimum resolution for your computer.
Chapter 04 Menu Function Key Guide → ――The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture 2nd Picture Mode 3rd Description This menu provides an optimum picture quality suitable for the environment where the product will be used. ――This menu is not available when Eco Saving Plus is enabled. ――This menu is not available when Game Mode is enabled.
2nd 3rd Description In AV mode When the external input is connected through HDMI, DP and PC/AV Mode is set to AV, Picture Mode has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which automatically recalls your personalised picture settings. •• Dynamic: Select this mode to view a sharper image than in Standard mode.
2nd Sharpness 3rd Description Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. ――This option is not available when Picture Mode is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. Color Adjust the tint of the screen. •• Color Tone: Select a colour tone that best suits your viewing needs. •• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the colour.
2nd Game Mode 3rd Description Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. ――This menu is not available when Eye Saver Mode is enabled. ――This menu is not available when Eco Saving Plus is enabled. ――When the product turns off, enters power-saving mode or changes input sources, Game Mode turns Off even if it is set to On.
OnScreen Display 2nd 3rd Description Transparency Set the transparency for the menu windows. Position •• H-Position: Move the menu position to the left or right. •• V-Position: Move the menu position up or down. Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. Display Time Set how long the menu window will remain on screen for when it is not in use.
System 2nd FreeSync 3rd Description FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution. For more information, see FreeSync page. Volume Change the Volume setting. Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. •• Off: Deactivate the Eco Saving Plus function.
2nd Off Timer Plus 3rd Off Timer Description •• Off Timer: Turn on Off Timer mode. •• Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ‒‒ This option is only available when Off Timer is set to On. ――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations.
Support 2nd Self Diagnosis 3rd Description Perform this test when you experience a problem with your monitor's picture. ――Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing. Software Update Update software using an update file on a USB device. 1 Save the update file (in .bin format) that you downloaded from the Samsung website (http://www.samsung.com/sec) to a USB device. 2 Connect the USB device to the Select port on the monitor.
Chapter 05 Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. Easy Setting Box enables users to use the product by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung website (http://www. samsung.com).
Chapter 06 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre ――Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Check the following. Installation issue The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
The message Check the cable connection and the settings of the source device. appears. There is no image on the screen and the power LED blinks every 0.5 to 1 second. Check that the cable is properly connected to the product. The product is operating in power-saving mode. Check that the device connected to the product is powered on. Press any key on the keyboard or move the mouse to return to normal operating mode. Check the PC/AV Mode status. ( PC or AV.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •• Windows 8(Windows 8.
Chapter 07 Specifications General Model Name F22T45* F24T45* F27T45* Size 22 Class (21.5 Inches / 54.6 cm) 24 Class (23.8 Inches / 60.4 cm) 27 Class (27 Inches / 68.6 cm) Display area 476.064 mm (H) x 267.786 mm (V) 527.04 mm (H) x 296.46 mm (V) 597.888 mm (H) x 336.312 mm (V) Pixel Pitch 0.24795 mm (H) x 0.24795 mm (V) 0.2745 mm (H) x 0.2745 mm (V) 0.3114 mm (H) x 0.3114 mm (V) Maximum Pixel Clock 174.5 MHz 174.5 MHz 174.
Standard Signal Mode Table Model Name Synchronization (PANEL Spec) Resolution F22T45* F24T45* F27T45* Horizontal Frequency 54 ~ 83 kHz 56 ~ 84.5 kHz 53.2 ~ 147.
Resolution VESA, 1280 x 1024 Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ VESA, 1920 x 1080 83.894 74.973 174.
Chapter 08 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service •• External impact or drop. technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card. •• Off: Disable FreeSync. •• On: Turn on the AMD graphics cards' FreeSync function. You may experience intermittent flickers when playing some games.