User Manual F27T70* The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Table of contents Before Using the Product Connecting and Using a Source Device Color Settings Securing the Installation Space 4 Read below before connecting the product.
Table of contents System settings Specifications Language 24 General 31 OnScreen Display 24 Standard Signal Mode Table 32 Sound 24 Reset All 24 USB Update 25 Self Diagnosis 25 Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Installing the Software Easy Setting Box Appendix 34 34 34 34 27 Restrictions and Problems with the Installation 27 System Requirements 27 Troubleshooting Guide Requirements Before Contac
Chapter 01 Before Using the Product Securing the Installation Space Safety Precautions Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed.
Cleaning Electricity and Safety High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Warning ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product • Do not use a damaged power cord or plug, or a loose power socket. • Do not use multiple products with a single power socket. • Do not touch the power plug with wet hands. • Insert the power plug all the way in so it is not loose.
Installation Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. Caution • Do not drop the product while moving. • Do not set down the product on its front. • When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding. ‒ Children may suffocate.
Operation Warning • • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Centre. ‒ Contact Samsung Customer Service Centre for repairs. • To move the product, first disconnect all the cables from it, including the power cable.
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. • ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Looking at the screen too close for an extended period of time can deteriorate your eyesight. • Do not use humidifiers or stoves around the product.
Chapter 02 Preparations Parts Parts Description Multi directional button that helps navigate. JOG Button ― JOG button is located in the bottom of the screen center, and has 5 directions as UP/DOWN/LEFT/RIGHT/PRESS(ENTER). Control Panel This LED is power status indicator and works as ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without Power LED notice to improve quality.
Function Key Guide ― To use the Function Key Guide, press the JOG button when the screen is turned on. Then the following window appears. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appearwhen the focus changes. ― When the product not displays the OSD menu, the JOG Button could be used as below. ― Up : Change the settings for Brightness. ― Down : Change the Volume setting. ― Left or Right : Change the Source setting. PRESS(ENTER): The selected item will be applied.
Types of Ports Anti-theft Lock ― The functions available may vary depending on the product model. The colour and shape of parts may ― An anti-theft lock allows you to use the product securely even in public places. differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. X4 1 Insert the support rod into the bottom bracket in the direction shown in the figure. Tighten the connecting screw at the bottom of the bracket to fix the support rod firmly. 2 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
Removing the Stand ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. 1 Place the machine on a clean and flat surface as shown in the figure. Push the button up and hold. 2 Follow the arrow to loosen the screws. 3 Follow the arrow to separate the stand from the display. 4 Unscrew the screws and separate the stand rod from the bracket as indicated by the arrow.
Precautions for moving the product Adjusting the Product Tilt and rotation angle ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -3.0°(±2.0°)~ 21°(±2.0°) • Do not press down on the product. There is a risk of damaging the product. • Do not directly apply pressure on the screen. • Do not hold the screen when moving the product. -45°(±2.0°)~ 45°(±2.0°) • Do not hold the product upside down only by the stand. • -2.
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Connecting and Using a PC 1 Before connecting the product, check the shapes of both ports of the supplied signal cables and Select a connection method suitable for your PC. the shapes and locations of the ports on the product and external device.
Connection Using an HDMI-DVI Cable Connecting the Power HDMI 1 ― The audio function is not supported if the source device is connected using the HDMI-DVI cable. ― The optimum resolution may not be available with an HDMI-DVI cable. 2 Connection Using an DP Cable 3 DP 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port on the back of the product. 2 Next, connect the power cable to the power outlet. ― A DP cable shorter under 1.5 m in length is recommended.
Correct posture to use the product Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution ― If you want to set the optimum resolution for your computer.
Chapter 04 Picture Setup Function Key Guide → → Picture A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Brightness Black Equalizer You can adjust the general brightness of the picture. (Range: 0~100) Adjust the brightness of dim areas.
Picture Mode Screen Ratio This menu provides an optimum picture quality suitable for the environment where the product will be used. Change the picture size. • Custom: Customise the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. • Cinema: Obtain the brightness and sharpness of monitors suitable for enjoying video and DVD content. • Custom: Customise the contrast and brightness as required.
Chapter 05 Color Settings Function Key Guide → → Color A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Color Tone Gamma Adjust the tint of the screen. Turn on or off “Eye Saver Mode” . • Red: Adjust the red saturation level.
Chapter 06 Game settings Function Key Guide → → Game A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. AMD FreeSync ― If you encounter any issues when using the function, contact the Samsung Service Centre.
Response Time Off Timer Accelerate the panel response rate to make video appear more vivid and natural. The Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. ― Use Standard mode when not playing a video or game. ― If you do not want the timer to activate, go to → Game → Off Timer to Off. DCR (Dynamic contrast) The brightness is automatically adjusted to provide the best screen contrast for the current conditions.
Chapter 07 Source settings Function Key Guide → → Source A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP HDMI (2.0) Select the DisplayPort to be used. Select the HD multimedia interface to be used 1(version 2.0).
Chapter 08 System settings Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Language Sound Set the menu language. Operate the Jog key up/down to activate/deactivate the muffler function and adjust the volume.
USB Update Self Diagnosis Update software using an update file on a USB device. 1 Use the Function Key Guide and go to → System → Self Diagnosis. 1 Save the update file (in .bin format) that you downloaded from the Samsung Electronics website (http://www.samsung.com/sec) to a USB device. 1920*1080 2 Connect the USB device to the SERVICE port ( Select ) on the monitor. → Support → Software Update . 3 Follow the instructions on the screen to proceed with update.
3 Base on the test result, select Yes / No / Show Again. Do you still see the same problem on the test screen? If you need to see the photo again, click Show Again. Yes • Show Again OK You will see the following screen when you select Yes. • You will see the following screen when you select No. Self Diagnosis Complete If the test screen is okay during Self Diagnosis, your monitor may not have a problem.
Chapter 09 Installing the Software Easy Setting Box System Requirements OS Hardware • Windows 7 32Bit/64Bit • At least 32MB of memory • Windows 8 32Bit/64Bit • At least 60MB of free space on the hard disk drive Easy Setting Box enables users to use the product by partitioning multiple sections. • Windows 8.1 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com.
Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Check the following. Installation issue ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
The message Check the cable connection and the settings of the source device. appears. Text is blurry. Check that the cable is properly connected to the product. If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel → Fonts → Adjust ClearType text and change Turn on ClearType . Check that the device connected to the product is powered on. OVER RANGE is displayed.
Q&A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. • Windows 8(Windows 8.
Chapter 11 Specifications General Model Name F27T70* Size 27 Class (26.9 Inches / 68.4 cm) Display area 596.73 mm (H) x 335.66 mm (V) Pixel Pitch 0.233 mm (H) x 0.233 mm (V) Maximum Pixel Clock 75.53 MHz (4pixel/clock) Power Supply AC100-240V~ 50/60Hz Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
Standard Signal Mode Table Model Name Synchronization Resolution F27T70* Horizontal Frequency 71.3 ~ 117 kHz Vertical Frequency 48 ~ 76 Hz Optimum Resolution 2560 x 1440 @ 60 Hz Maximum Resolution 2560 x 1440 @ 60 Hz (HDMI1) 2560 x 1440 @ 75 Hz (HDMI2/DisplayPort) If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted.
Port Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ +/+ VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ VESA, 2560 x 1440 88.787 59.951 241.500 +/- VESA, 2560 x 1440 93.850 74.999 302.
Chapter 12 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault Product damage caused by customer's mishandling or wrong repair If a product damage is caused by; ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. • External impact or drop. • Use of supplies or separately sold product unspecified by Samsung.